IP网络资源调度与接纳控制技术研究

从IP QoS技术的研究现状出发,结合IETF的研究成果与电信网NGN的技术发展方向,阐述基于策略的端到端接纳控制框架的技术原理,在各大标准组织的技术框架内,给出一个具体的、切实可行的实现方法。     

同步辐射晶体单色器晶体热应变的模拟与实验结果的比较

报道了同步辐射装置光束线关键部件之一的晶体单色器晶体热应变的ANSYS有限元模拟结果,并与实验结果进行了比对,模拟结果在实验误差范围(约士15%)内与实验数据符合,证明了模拟结果的可靠性.     

肝单光子发射计算机断层若干物理因素的讨论

我们于1985年对我院1984年开展肝单光子发射计算机断层以来的52例肝病人进行了分析总结。结果表明,肝单光子发射断层在诊断肝内占位性病变方面比普通肝静态γ照相有许多优点。需要指出的是,肝单光予发射断层的若干优点及诊断的准确性是与物理条件的正确选择和应用密切相关的。本文根据至今积累的近100例断层经验,从技术方面介绍了影响单     

On‐Line Detection Of State‐Of‐Charge In Lead Acid Battery Using Radial Basis Function Neural Network

To realize a stable supply of electric power in an automobile, an accurate and reliable detection method of SOC (state‐of‐charge) in a lead acid battery is required. However the dynamics of the battery is very complicated. The characteristics of the battery greatly change due to its degradation. Moreover a automobile has many driving patterns, which are unknown beforehand. Thus it is not easy to detect the SOC analytically. In this paper, to overcome this problem, a new on‐line SOC detection method with a radial basis function neural network is proposed. In order to increase the detection accuracy of degraded batteries, physical values related to the degradation degree are used as input signal in the neural network. The detection accuracies for different sized batteries and various degradation states are investigated.     

挠性抗回旋PDC钻头的有限元分析

回旋是导致PDC钻头早期失效的主要原因，介绍了一种基于挠性钻头的构想设计的抗回旋PDC钻头，阐述了其结构和抗回旋原理。对挠性钻头的公、母接头进行了有限元应力分析，说明了模型建立、网格划分以及约束和载荷施加过程中所采用的方法和关键技术。有限元分析结果表明挠性钻头的强度满足要求。     

图像处理中自适应数学形态学的研究

实际图像处理中当视场的变化引起目标变形时,固定大小的形态学算子很难达到较好的处理效果。研究了利用距离变换自适应地调整结构元大小的方法,即根据图像的不同位置来调整结构元素的大小,从而实现图像的形态学运算,并由此推导出了快速计算方法,最后测试了这种新算法的有效性。实验结果表明,该算法取得了较为理想的效果。     

软土地层中盾构法开挖三维有限元模拟

以某条软土地层中开挖的地铁隧道为例,根据非线性有限元法的基本原理,利用大型非线性有限元软件ADINA三维动态模拟地铁隧道开挖过程,计算结果揭示了在盾构推进过程中地表沉降分布以及特点,得到盾构法开挖引起的地表沉降曲线,其形态与Peck计算得出的横向地表沉降槽正态分布曲线的形态基本一致,隧道轴线正上方地表沉降最为明显。     

含氟聚酰亚胺的辐射交联及其交联度的XPS表征

含氟聚酰亚胺(FPI)是一种耐高温、耐水解的新型聚酰亚胺。到目前为止,尚未见文献报道它的辐射交联。本文发现它能在高温辐射下交联,交联后的含氟聚酰亚胺的玻璃化转变温度以及高温力学性能有明显提高。本文还首次用XPS方法做了它的交联度表征。用XPS方法求得FPI的凝胶化剂量为50Mrad。     

影响长廊阻抗式调压室配筋的几个因素分析

采用三维非线性有限元方法,对四川天全县干溪坡水电站调压室结构特性进行研究,并对几个影响配筋的因素进行敏感性分析,得出各个因素对配筋结果的影响,为调压室结构设计提供科学依据。     

Thermal analysis of a ceramic coating diesel engine piston using 3-D finite element method

In this study, firstly, thermal analyses are investigated on a conventional (uncoated) diesel piston, made of aluminum silicon alloy and steel. Secondly, thermal analyses are performed on pistons, coated with MgO-ZrO₂ material by means of using a commercial code, namely ANSYS. Finally, the results of four different pistons are compared with each other. The effects of coatings on the thermal behaviors of the pistons are investigated. It has been shown that the maximum surface temperature of the coated piston with material which has low thermal conductivity is improved approximately 48% for the AlSi alloy and 35% for the steel.