一种基于网络应用特征串识别的局域网管理方案

鉴于网络应用的高速发展,局域网呈现出复杂化的趋势,为更好的完成局域网管理的工作,提出一种基于网络应用行为识别与统计分析的局域网管理方案。该方案以网络特征串识别网络应用行为为基础,以主动识别网络应用行为的方式,通过对网络应用的归类和统计分析实现对局域网网络的积极管理。该方案可以在局域网内有效实现对网络应用的主动监控,网络管理员可以自行设置网络管理方式,达到主动管理灵活监控的目标,优化局域网网络环境。     

动态法快速测定催化剂比表面

本文采用动态法原理测定催化剂的比表面，利用热导检测器测定催化剂微孔在液氮下的吸附及常温下的脱附面积。用外标法进行定量。该方法分析速度快．在l小时内同时测定3个样品的比表面。其准确度及精密度满足要求。     

On the importance of some surface and interface characteristics in the formation of the properties of adhesive joints

The importance of some relative surface characteristics which determines the strength of adhesive joints: specific surface of substrate , relative contact area β and specific contact area β in the adhesion interaction process were emphasised. Existing and potential methods of experimental evaluation of these characteristics were shortly analysed. The durability of the adhesive joints in water media significantly increases with growth of specific surface ^* of chemically treated substrate evaluated from the SEM micrographs. Specific surface calculated from the experimental data of hexane adsorption measurements for iron particles (particulate model of steel substrate) is more then ten times greater than respective ^* values. The relative contact area β of the Al₂O₃ particles (in wide range of ) with PE melt was in a roundabout way evaluated by experimental determination of the affect of on kinetic of peel strength formation of adhesive joints: Al₂O₃ filled PE-steel. The speculation was based on the ability of Al₂O₃ to adsorb low-molecular products of contact oxidation of PE which takes place in the process of formation of adhesive joints and determines their strength. The ability of sorption in its turn is proportional to efficient value of β. The availability of the Al₂O₃ surface was evaluated.     

Analysis of junction temperatures in high-power GaN-based LEDs

We presented the analysis of the incomplete conduction in bonding medium in high power GaN-based light-emitting diode (LED) packages. A numerical study was carried out with parametric model to understand the junction temperature variation due to bonding medium defects. Transient thermal measurement was performed to evaluate LED’s junction temperature. Thermal resistance from chip to lead frame was 20 K/W in our sample LED. It was suggested that only 60% of the surface area of the bonding medium was involved...     

信息化系统在滦河下游灌区管理中的应用

针对滦下灌区设备老化、管理落后的问题,按照经济实用、运行稳定、技术先进、随时升级的原则,对滦下灌区管理处进行了灌区信息化建设.灌区信息化系统主要包括自动化采集、自动化控制、智能化调度3大功能,初步实现了自动采集数据、遥控启闭闸门、远程屏幕监控、智能磁卡收费等功能.该灌区管理系统自应用以来成效明显,可为我国其他灌区自动化改造借鉴.     

Zipf定律在划定经济区域内的实证研究——以长江三角洲经济区为例

国外关于Zipf定律的实证研究的区域空间多采用国家层次,而国内关于Zipf定律的实证研究则涉及国家、跨省的经济区及行政省的不同层次,于是这就有可能存在经济区域空间划定是否合理的问题。现以长江三角洲地区为例,通过修正的引力模型计算城市之间的经济联系强度及潜能,以此进行长江三角洲经济区域的空间划定,并在划定的经济区域内进行Zipf定律的实证研究,以验证经济区域空间划定是否合理。研究结果显示了经济区域空间划定的合理性。     

双足机器人行走稳定性研究

双足机器人行走的稳定性是双足行走最为重要的衡量指标之一.针对传统的基于零力矩点（ZMP）步态稳定性判据方法,分析了ZMP、COP的相互关系,表明在双足机器人与水平地面无粘性力和无吸附力作用下,其ZMP即为压力中心点COP.基于具有足趾关节的双足机器人足底支撑面多种变化,提出对多点接触时支撑多边形区域描述.结合ZMP/COP、COG的在支撑面内相对位置,提出了基于ZMP/COP、COG的综合稳定性判据.经仿真分析,与传统单一的ZMP稳定性判据相比,该综合稳定性判据能够更为准确地反映步态的稳定性.     

Renewal strategies for old industrial areas in the post-industrial age—Take “Zurich-West” in Switzerland as an example

This paper introduces and analyses the renewal planning of “Zurich-West”, an old industrial area. It points out that systematic and comprehensive target orientation, extensive collaboration in argumentation and decision-making, and the design ideas of coexistence and integration are the key to its success. Considering the status quo of China’s old industrial district remodeling, the paper offers some suggestions. Supported by the National Natural Science Foundation of China (Grant No. 50878045)     

一种新型瞬变电磁发射机去过冲系统设计

针对瞬变电磁发射机发射电流过冲造成探测盲区的问题,提出了一种新型瞬变电磁发射机去过冲系统设计方案。该方案在发射线圈两端并联一个优化的RLC二阶电路,在发射电流下降到接近零时接通该电路,让发射电流按指数衰减,从而有效去除电流过冲。仿真与实验结果表明,该方案能够去除发射电流的过冲振荡,减小探测盲区。