阿曼Daleel油田分支井钻井液技术研究

对Daleel油田作业5区三分支水平井DL-59井井下复杂情况分析,室内测定了引起复杂情况的Nahr Umr泥页岩地层的矿物组分和粘土矿物含量,优选了适应在该泥页岩地层215.9 mm造斜井段的钻井液配方中的各种处理剂,最后研制出钻井液配方,通过DL-73井应用后,取得了良好的防塌效果.     

Quantification of the layer dispersion degree in polymer layered silicate nanocomposites by transmission electron microscopy

As the performance of polymer layered silicate nanocomposites strongly depends on their interior layer dispersion, quantification of the layer dispersion degree is needed. In this work, a new methodology was developed to determine the dispersion parameter D_0.1, based on the measurement of the free-path spacing distance between the single clay sheets from the transmission electron microscopy (TEM) images. Several examples of exfoliated, intercalated, and immiscible composites were studied. It was found that the exfoliated composites had D_0.1 over 8%, while that of intercalated composites were between 4 and 8%. In the case of intercalation, a high frequency peak appeared at a short spacing distance in the histogram, which was a characteristic of the intercalation, distinct from the exfoliation. The main utility of this TEM methodology is for the quantification of exfoliated or intercalated samples with small number of layers with stacks. The dispersion parameter D_0.1 below 4% was suggested to classify as immiscible. A unique advantage of the TEM measurement is that the dispersion degree of different fillers can be counted individually.     

CFG桩复合地基在某高层建筑地基处理中的应用

结合具体工程实例,进行了CFG复合地基作为一种高层建筑地基处理方法的研究,对加固机理和设计步骤作了阐述,并对加固效果进行了检测分析,可供类似工程地基处理作参考。     

A prediction method for thermal conductivity of alternative refrigerants in the liquid phase

A prediction method for the thermal conductivity of halocarbon refrigerants in the saturated liquid state in the reduced temperature range 0.3 to well above 0.9 is presented in this paper. The aim of the method is to present a very simple calculation of the transport property useful for engineering purposes. The method determines thermal conductivity as a sole function of the reduced temperature and requires the knowledge of a parameter dependent upon easily available physical constants characteristic of each compound. The method is validated against experimental data available in the literature, giving average absolute deviations which are usually less than 5%, with maximum absolute deviations generally less than 10%. An extension of the method to estimate thermal conductivity of binary mixtures is also presented, along with a comparison with the few experimental data available in the literature.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

提高润滑油基础油氧化安定性的组合工艺

以生产润滑油基础油的老三套工艺为基础，开发了改善油品氧化安定性的组合工艺。该工艺的主要特点是包括一步络合脱氮过程。实验证明，该组合工艺既可以有效地提高基础油的氧化安定性，又能降低溶剂精制深度，提高基础油收率。     

以磷酸为粘结剂的高铝钒土砂的研制与应用

介绍了以磷酸为粘结剂的高铝钒土砂的组成和性能及在离心铸造端盖造型上的使用方法和使用效果。实践证明，它具有很好的经济效益和社会效益。     

半空间饱和土中瑞利波特性

通过对饱和土中波的运动方程及连续方程分析，推导了饱和土中瑞利波特征方程，讨论了半空间饱和土中瑞利波波速度的弥散特性，以及位移和孔压分布情况。     

Synthesis, characterization and catalytic application for wet oxidation of phenol of iron-containing clays

High-surface-area pillared clays (PILC) were prepared from naturally occurring montmorillonites by exchanging interlayer ions to polyoxocations containing (i) aluminum (Al₁₃-PILC), (ii) iron adsorpted onto Al₁₃-PILC, and (iii) iron and aluminum located within the same complex (Fe_0.8Al_12.2-PILC). The obtained Fe_0.8Al_12.2-PILCs were characterized by DR–UV–vis and IR spectroscopy, XRD, ESR, scanning electron microscopy and low temperature N₂ adsorption measurements. Important factors affecting catalyst activity and phenol removal efficiencies have been studied, i.e. the effect of pH, temperature, catalyst concentration and stability of the catalyst.     

水泵类负载电动机的软起动控制器

为解决水泵机组起动电流大和易出现水锤现象的问题,提出一种以PIC单片机为控制核心的电动机软起动控制器。分析了控制器的工作原理,给出了控制器的组成结构和软件程序结构图,阐述了恒流软起动的原理。采用该控制器有效解决了电机在起动过程中产生的大冲击电流的问题,避免了水锤现象的产生,使得水泵机组的运行安全平稳。     

原木板材的窑式干燥

本文综述了canterbury大学近年来关于新西兰木材窑式干燥的研究。有些硬木单纯窑式干燥是困难的,但利用太阳能窑式风干则有可能;轮回操作可以减小干燥应力从而减小产品性能的退化程度。种植生产为主的软木干燥较容易,从经济考虑应采用高温干燥,以减少干燥时间。高温操作时对流传递显得相当重要。实验表明,当空气流过板面时,不同点处的传质系数有显著差异。湿分在木板中移动的模型可假定为:随着干燥进行蒸发面向中心退缩。但心材和边材的行为有所不同:边材中的水份可在相邻脉管间迁移,但在心材中则不可能。正是这种差异导致干燥时间和干燥温度曲线不同。