考虑电池储能老化和需求侧响应的交直流混合配电网动态重构方法

现有的电池储能模型一方面认为电池的充放电功率和效率为固定不变的,另一方面有关电池储能的充放电过程对循环老化的影响缺少考虑,这与电池单元本体的非线性等效电路模型相违背。因此,考虑电池储能的循环老化成本、需求侧响应,提出了交直流混合配电网动态重构方法。通过对实际电池储能的充放电功率的运行区域进行采样,在凸包络的采样点集合中将非理想状态下的电池储能模型重构为线性模型。在此基础上,分别建立了基于累积吞吐电量和放电深度的循环老化成本模型,构建了综合成本最小化的交直流混合配电网动态重构模型。并采用混合整数二阶锥规划方法求解。在改进的33节点算例上仿真验证了所提基于放电深度的循环老化成本模型的经济性,分析了交直流混合配电网重构方法经济性的影响因素。     

Small Changes,Big Impact: Tungsten Bronzes with Extremely Large Second Harmonic Generation Achieved by the Transition Metal Doping on the B-Site

Two novel transition metal-doped tungsten bronze oxides, Pb_2.15Li_0.85Nb_4.85Ti_0.15O₁₅ (PLNT) and Pb_2.15Li_0.55Nb_4.85W_0.15O₁₅ (PLNW), are synthesized by high-temperature solid-state reactions. The Rietveld method using the high-resolution synchrotron radiation indicates that PLNT and PLNW crystallize in the orthorhombic polar noncentrosymmetric space group, Pmn2₁ (no. 31). As a class of tungsten bronze oxide, PLNT and PLNW retain a unique rigid framework composed of d⁰ transition metal cation (Ti⁴⁺ or W⁶⁺)-doped highly distorted NbO₆ octahedra along with the subsequently generated Pb/LiO₁₂ and PbO₁₅ polyhedra. Interestingly, the d⁰ transition metal-doped tungsten bronzes, PLNT and PLNW, exhibit extremely large second-harmonic generation (SHG) responses of 56 and 67 × KH₂PO₄, respectively. The observed immeasurably strong SHG is mainly attributed to a net polarization originating from the alignment of highly distorted NbO₆ octahedra with doped transition metals in the frameworks. It is believed that doping transition metal cations at the B-site of the tungsten bronze structures should be an innovative strategy to develop novel high-performance nonlinear optical materials.     

一种宽带注入锁定三倍频器

文章提出了一种宽带注入锁定三倍频器。在传统注入方式基础上,倍频器采用了推-推差分对输入信号进行二倍频,并将产生的二次谐波通过变压器耦合至注入管的源极共模点,增强了注入管源极共模点二次谐波。由于注入电流是由注入信号与源极共模点二次谐波进行混频而产生,因此注入电流也被增强,从而增大了锁定范围。除此之外,三倍频采用了四阶谐振器,谐振阻抗的相位在过零点被平坦化,锁定范围进一步被增大。采用标准CMOS 65 nm工艺设计三倍频,芯片面积为720×670 μm²,1.2-V供电时的功耗为15.2 mW。0 dBm注入功率下三倍频的锁定范围为19.2~27.6 GHz,对应的基波抑制比大于25 dB,二次谐波抑制大于35 dB。注入锁定三倍频器可满足5G收发机中本振源的要求。     

二甲基硅油 C-Si 伸缩振动模式红外光谱研究

在303~393 K温度范围内,采用变温傅里叶变换衰减全反射红外光谱技术(ATR-FTIR)研究了二甲基硅油的一维红外光谱、二阶导数红外光谱、四阶导数红外光谱和去卷积红外光谱。实验发现,在1800~600 cm~(-1)范围内,二甲基硅油主要存在CH_3伸缩振动模式(νCH_3)、CH_3变形振动模式(δCH_3)、CH_3摇摆振动模式(ρCH_3)、Si-O伸缩振动模式(νSi-O)和Si-C伸缩振动式(νSi-C)等5种红外吸收模式,其中782 cm~(-1)和789 cm~(-1)处的红外吸收峰归属于二甲基硅油νSi-C。以二甲基硅油νSi-C为研究对象,进一步开展相关二维红外光谱的研究。结果发现,随着测定温度的升高,二甲基硅油νSi-C红外吸收强度的变化快慢顺序为:789 cm~(-1)782 cm~(-1)。本项研究拓展了ATR-FTIR技术在二甲基硅油热变性方面的研究范围。     

旋转摩擦挤压法制备CNTs/Mg复合材料的组织和力学性能

通过显微硬度和抗拉强度试验、X射线衍射仪、扫描电镜和金相显微镜观察,研究经旋转摩擦挤压法制备的CNTs/Mg复合材料的组织及性能。结果表明:CNTs/Mg复合材料的组织为细小等轴晶,且随着CNTs含量的增加,复合材料晶粒尺寸逐渐细化,当CNTs含量为5%时,晶粒尺寸最小,由63μm减小至3.79μm,为AZ91基材晶粒尺寸的6.01%。经过旋转摩擦挤压加工后基材内第二相β-Al12Mg17相的量减少,CNTs的加入使复合材料中出现了Al4C3相,且第二相β-Al12Mg17相网状结构消失。加工后的镁合金抗拉强度提高,最大值为330.9 MPa,较原基材提高了90.6%,当CNTs含量小于2%时,复合材料强度高于原基材。复合材料硬度随着CNTs含量的增加呈先增加后降低的趋势,当CNTs含量为2%时,硬度最高,达101.3HV,比AZ91基材提高了40.3%。     

基于混合搜索算法的贴片机贴装过程优化

贴片机是PCB组装生产线中的瓶颈设备,提高其贴装效率对整个生产线有重要意义;针对该设备的生产效率优化问题,提出了由最近邻算法和分散搜索算法组成的混合算法;本算法将使用最近邻算法求解元器件的拾取贴装顺序并通过将其引入到分散搜索的框架中求解喂料器分配问题,使两个子问题的求解过程相互结合,从而更好完成贴装效率的优化;仿真结果表明,在大多数情况下该算法都能够在取得优于原有最近邻算法的效果;说明该算法能够更好的提高贴片机的贴装效率.     

面向能力培养的信息系统专业方向实践课程改革

本文以江西财经大学开设的信息系统专业方向为例,结合人才市场需要和我校财经背景,提出了面向能力培养的财经类院校计算机专业实践课程体系,特别指出了其中第二阶段实践课程的作用、地位和改革方案。     

Virtual worlds as knowledge management platform – a practice‐perspective

Virtual worlds, as electronic environments where individuals can interact in a realistic manner in form of avatars, are increasingly used by gamers, consumers and employees. Therefore, they provide opportunities for reinventing business processes. Especially, effective knowledge management (KM) requires the use of appropriate information and communication technology (ICT) as well as social interaction. Emerging virtual worlds enable new ways to support knowledge and knowing processes because these virtual environments consider social aspects that are necessary for knowledge creating and knowledge sharing processes. Thus, collaboration in virtual worlds resembles real‐life activities. In this paper, we shed light on the use of Second Life (SL) as a KM platform in a real‐life setting. To explore the potential and current usage of virtual worlds for knowledge and knowing activities, we conducted a qualitative study at IBM. We interviewed IBM employees belonging to a special workgroup called ‘Web 2.0/virtual worlds’ in order to gain experience in generating and exchanging knowledge by virtually collaborating and interacting. Our results show that virtual worlds – if they are able to overcome problems like platform stability, user interface or security issues – bear the potential to serve as a KM platform. They facilitate global and simultaneous interaction, create a common context for collaboration, combine different tools for communication and enhance knowledge and knowing processes.     

Black‐box position and attitude tracking for underwater vehicles by second‐order sliding‐mode technique

In this work we address the tracking control problems for autonomous underwater vehicles (AUVs). The proposed solution is based on the variable structure systems (VSS) theory and, in particular, on the second‐order sliding‐mode (2‐SM) methodology. The tuning of the controller is carried out via black‐box approach, dispensing with the knowledge of the actual AUV parameters, by simply progressively increasing a single gain parameter. The presented stability analysis includes explicitly the unmodelled actuator dynamics and the presence of external uncertain disturbances. The good performance of the proposed scheme is verified by means of simulations on a 6‐DOF AUV. Copyright © 2009 John Wiley & Sons, Ltd.     

地方性高校计算机专业搭建实践平台的探索

本文以兴趣小组、新技术讲座、项目开发小组,科研小组等第二课堂形式为重要支撑点,阐述了搭建符合地方性高校实际情况、多层次实践平台的方法和措施。实践表明,这些措施和方法,对提高学生实践能力,实现高校人才培养目标,效果显著。