大宗粉煤灰的综合利用及提质方案

对于大宗粉煤灰原灰进行分选加球磨机粉磨,同时添加合适的激发剂进行提质,可以生产出不同细度和活性的粉煤灰产品,提升粉煤灰在水泥及商品砼中的用量。介绍了某发电公司的粉煤灰处置现状,在此基础上,对商品砼的粉煤灰性能要求进行了大量市场调研,针对性地给出了该公司粉煤灰的提质方案,最后进行了提质粉煤灰的应用市场和产品竞争力分析。     

大掺量粉煤灰对混凝土渗透性的影响

以粉煤灰代替３０％的水泥，在水胶比为０．３０、０．３３、０．３６及０．３９的情况下，分别试验了用水量及胶凝材料用量变化下混凝土的强度和渗透性。试验结果表明，与不掺粉煤灰的混凝土比较，掺粉煤灰混凝土的渗透性都明显降低，３０天龄期时最大可降低至５０．７％，７０天时可降低至２２．３％；为了获得较低的渗透性而采取较低的水胶比时，不掺粉煤灰的混凝土应用降低用水量的办法有利，掺粉煤灰的混凝土用提高总胶凝材料用量的办法更好     

水下隧道混凝土中水分运移

分析了水下隧道非饱和混凝土中水分运移的理论模型;实验获得了混凝土孔隙率、初始饱和度、饱和水力传导系数和混凝土等温吸附曲线等基本参数,通过室内加压渗流实验得到了水分运移深度随加压时间、水压、初始饱和度和水胶比的变化规律;采用TOUGH2软件数值模拟了水分等温水平运移中流速和饱和度的变化规律和分布特征。研究认为水下隧道混凝土中水分受外水压力和毛细吸力共同驱动;外水压力越大、初始饱和度越小,水分运移速度越快、水分运移深度越大;随着饱和度提高水分润湿锋面前移,混凝土内完全饱和区域逐渐扩大,压力差逐渐取代毛细吸力成为水分运移的控制因素。     

Preparation and monovalent selective properties of multilayer polyelectrolyte modified cation‐exchange membranes

This study reports the modification of commercial cation‐exchange membrane by layer‐by‐layer adsorption of polyethyleneimine and poly(acrylic acid) (PAA) to endow them with monovalent ion selectivity. The chemical and morphological changes of the modified membrane surface were examined by ATR‐FTIR and SEM, respectively. The permselectivity for monovalent cations of the membranes was investigated by electrodialysis experiments. The effects of deposited bilayer number, the salt concentration, and pH of the dipping polyelectrolyte solutions on selectivity were investigated. Meanwhile, the resistance of membranes was measured taking energy consumption into consideration. The polyelectrolyte multilayer was crosslinked using epichlorohydrin to improve stability, and the durability of the composite membrane was studied. Separation mechanism of the composite membrane was also investigated. It is demonstrated that the bivalent cations are mainly rejected by electrostatic repulsion from the positive charge on the surface of the composite membranes. The sieving effect of the dense structure of skin layer becomes more pronounced with the number of deposited layers increased. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41488.     

Multiscale approach to the morphology,structure, and segmental dynamics of complex degradable aliphatic polyurethanes

A multiscale approach spanning from the segmental (subnanometer) up to micrometer level was applied for detailed study of the self‐assembly of aliphatic block polyurethane (PU) elastomers. To understand the principles of the self‐organization of hard and soft segments in the complex multi‐component systems, several two‐component model PU samples, that is, the products of 1,6‐diisocyanatohexane (HDI) with three diols differing in the length and constitution were also prepared, characterized, and investigated: (i) polycarbonate‐based macrodiol (MD), (ii) biodegradable oligomeric diol (DL‐L; product of butane‐1,4‐diol and D,L‐lactide), and (iii) butane‐1,4‐diol (BD). The study (particularly ¹³C‐¹H PILGRIM NMR spectra) reveals complex internal organization and interesting (application appealing) behavior of multi‐component PUs. Hard segments (HDI+BD products) feature self‐assembled and significantly folded chain conformations with interdomain spacing 15–22 nm (small‐angle X‐ray scattering analysis). The small domains are hierarchically assembled in various structural formations of µm size (spherulites) depending on PU composition, as detected by transmission electron microscopy and atomic force microscopy. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41590.     

如何减少P·O42.5水泥新拌混凝土的 坍落度损失

天能水泥有限公司P·O42.5级水泥在加入萘系高效减水剂后混凝土坍落度损失较大。经原因查找分析,认为水泥过粉磨和熟料C3A含量偏高是主要原因。对此采取针对性的措施,包括对配料方案重新调整,操作上采用高温煅烧和快速冷却,及混合材的优选。随机试验结果表明,坍落度达到了工程规定范围。     

Applying γ‐Substituted Prolines in the Foldon Peptide: Polarity Contradicts Preorganization

Rational choice of chemical modifications to proline residues allows the preorganization principle to be exploited for more stable assembly of the foldon domain as a tag for trimerization. With systematic knowledge of how chemical and steric variations of the ring substituents affect the relative stabilities of exo and endo puckers, the preorganization principle should then be usable in biotechnologically synthesized foldon mutants and applicable for protein tagging elsewhere.     

Cellular Antisense Activity of PNA–Oligo(bicycloguanidinium) Conjugates Forming Self‐Assembled Nanoaggregates

A series of peptide nucleic acid–oligo(bicycloguanidinium) (PNA–BG_n) conjugates were synthesized and characterized in terms of cellular antisense activity by using the pLuc750HeLa cell splice correction assay. PNA–BG₄ conjugates exhibited low micromolar antisense activity, and their cellular activity required the presence of a hydrophobic silyl terminal protecting group on the oligo(BG) ligand and a minimum of four guanidinium units. Surprisingly, a nonlinear dose–response with an activity threshold around 3–4 μM , indicative of large cooperativity, was observed. Supported by light scattering and electron microscopy analyses, we propose that the activity, and thus cellular delivery, of these lipo‐PNA–BG₄ conjugates is dependent on self‐assembled nanoaggregates. Finally, cellular activity was enhanced by the presence of serum. Therefore we conclude that the lipo‐BG‐PNA conjugates exhibit an unexpected mechanism for cell delivery and are of interest for further in vivo studies.     

The effect of various fire‐exposed surface dimensions on the spalling of concrete specimens

Concrete spalling due to fire exposure is often defined as the sudden detachment of fragments from a concrete surface. It can be quantified by various parameters of which weight loss and spalling depth are the most common ones. The risk of spalling is influenced by many factors such as concrete composition, heating rate and applied testing methods. A reduced scale testing method should be developed to analyse the spalling behaviour and to understand its effectiveness in more detail. As a subsection of this development, this study aimed to analyse the effect of different‐sized, circular heated areas in semi full‐scale fire tests. Therefore, vermiculite slabs with varying cut‐outs in their centre were placed between a specimen made of a spalling‐sensitive concrete and the combustion chamber. The combustion chamber was heated following a standard fire curve. Our experimental results show that the thermal expansion inside of equal‐sized specimens is strongly dependent on the size of the heated area. In addition, this area also affects thermal stresses. They decrease as a result of lower temperature gradients for tests with smaller unheated boundary areas. Apart from this, the analysis of fragments shows no correlation between their relative volume distribution and the heated area. Copyright © 2014 John Wiley & Sons, Ltd.