电火花铣削钛合金加工工艺研究

在全面试验的基础上，对电火花铣削钛合金进行了初步研究，给出了电火花铣削钛合金的影响因素及其指标的关系曲线。并对其进行了数据分析。试验表明，冲油电火花铣削是加工钛合金的有效方法。     

Optimal Operation of Reservoir Systems using Simulated Annealing

A stochastic search technique, simulated annealing (SA), is used to optimize the operation of multiple reservoirs. Seminal application of annealing technique in general to multi-period, multiple-reservoir systems, along with problem representation and selection of different parameter values used in the annealing algorithm for specific cases is discussed. The search technique is improved with the help of heuristic rules, problem-specific information and concepts from the field of evolutionary algorithms. The technique is tested for application to a benchmark problem of four-reservoir system previously solved using a linear programming formulation and its ability to replicate the global optimum solution is examined. The technique is also applied to a system of four hydropower generating reservoirs in Manitoba, Canada, to derive optimal operating rules. A limited version of this problem is solved using a mixed integer nonlinear programming and results are compared with those obtained using SA. A better objective function value is obtained using simulated annealing than the value from a mixed integer non-linear programming model developed for the same problem. Results obtained from these applications suggest that simulated annealing can be used for obtaining near-optimal solutions for multi-period reservoir operation problems that are computationally intractable.     

钛合金的银脆,镉脆敏感性及其控制

利用慢应变速率拉伸技术（ＳＳＲＴ），并结合恒载实验，较全面地研究了Ｔｉ－６Ａｌ－４Ｖ合金的银脆行为、固态与液态镉脆行为，确定了应变速率、接触条件、热处理制度、试样取向、温度等因素对Ｔｉ－６Ａｌ－４Ｖ合金银脆与镉脆敏感性的影响，探讨了Ｎｉ阻挡层对控制Ｔｉ－６Ａｌ－４Ｖ合金和ＴＣ１１合金银脆开裂的作用。     

专用集成电路CAT技术的进展

本文简单地回顾了提高VLSI测试效率所采用的一些手段,讨论了在ASIC测试问题研究中出现的一些新观点、新方法、新动向,以及所取得的成果。在此基础上,文章阐明了ASIC测试技术的发展方向,并着重论述了可望在未来得到发展的,针对ASIC的功能测试方法。     

由1,4-萘醌催化合成1,4-二烷氧基萘-2,3-二甲腈

研究了以 1 ,4-萘醌为原料 ,通过溴代、氰化和 O-烷基化三步合成 1 ,4-二烷氧基萘 -2 ,3 -二甲腈。在溴代反应中以溴化试剂代替液溴 ;在氰化和 O-烷基化反应中以溴化十二烷基三甲基铵 (DTMAB)和聚乙二醇(PEG)作为相转移催化剂 ,并采用正交设计法考察了相转移催化剂、固体碱、反应温度等因素对反应的影响 ,其中氰化产物收率达 88.7%。     

Trade-offs in scan path and BIST implementations for RAMs

In this article we propose efficient scan path and BIST schemes for RAMs. Tools for automatic generation of these schemes have been implemented. They reduce the design effort and thus allow the designer to select the more appropriate scheme with respect to various constraints.     

Techniques for estimating test length under random test

When a circuit is tested using random or pseudorandom patterns, it is essential to determine the amount of time (test length) required to test it adequately. We present a methodology for predicting different statistics of random pattern test length. While earlier methods allowed estimation only of upper bounds of test length and only for exhaustive fault coverage, the technique presented here is capable of providing estimates of all statistics of interest (including expected value and variance) for all coverage specifications.Our methodology is based on sampling models developed for fault coverage estimation [1]. Test length is viewed as awaiting time on fault coverage. Based on this relation we derive the distribution of test length as a function of fault coverage. Methods of approximating expected value and variance of test length are presented. Accuracy of these approximations can be controlled by the user. A practical technique for predicting expected test length is developed. This technique is based on clustering faults into equal detectability subsets. A simple and effective algorithm for fault clustering is also presented. The sampling model is applied to each cluster independently and the results are then aggregated to yield test lengths for the whole circuit. Results of experiments with several circuits (both ISCAS '85 benchmarks and other practical circuits) are also provided.This work was done while the author was with the Department of Electrical Engineering, Southern Illinois University, Carbondale, IL 62901.     

Mixed-Signal Circuit Classification in a Pseudo-Random Testing Scheme

Pseudo-random testing techniques for mixed-signal circuits offer several advantages compared to explicit time-domain and frequency-domain test methods, especially in a BIST structure. To fully exploit these advantages a suitable choice of the pseudo-random input parameters should be done and an investigation on the accuracy of the circuit response samples needed to reduce the risk of misclassification should be carried out. Here these issues have been addressed for a testing scheme based on the estimation of the impulse response of the device under test (DUT) by means of input-output cross-correlation. Moreover, new acceptance criteria for the DUT are suggested which solve some ambiguity problems arising if the classification of the DUT as good or bad is based on a few samples of the cross-correlation function. Examples of application of the proposed techniques to real cases are also shown in order to assess the impact of the measurement system inaccuracies on the reliability of the test.     

Studies on the corrosion behavior of cerium-implanted zircaloy-4 with GAXRD

In order to study the influence of cerium ion implantation on the aqueous corrosion behavior of zircaloy-4, specimens were implanted by cerium ions with a fluence range from 1×10¹⁶ to 1×10¹⁷ ions/cm² at maximum 150°C, using MEVVA source at an extracted voltage of 40 kV. The valence and elements penetration distribution of the surface layer were analyzed by X-ray photoelectron spectroscopy (XPS) and auger electron spectroscopy (AES) respectively. Glancing angle X-ray diffraction (GAXRD) was employed to examine the phase transformation due to the cerium ion implantation in the oxide films. Three-sweep potentiodynamic polarization measurement was employed to value the aqueous corrosion resistance of zircaloy-4 in a 1 N H₂SO₄ solution. It was found that a significant improvement in the aqueous corrosion behavior of zircaloy-4 implanted with cerium ions compared with that of the as-received zircaloy-4. The improvement effect will declined with raising the implantation fluence. The bigger is the fluence, the less is the improvement. Finally, the mechanism of the corrosion behavior of the cerium-implanted zircaloy-4 is discussed.     

Simulation of cup-cone fracture using the cohesive model

The cohesive model is used for the prediction of the crack path during stable crack extension in ductile materials. The problem of crack-path deviation is investigated by means of simulation of crack propagation in a round tensile bar. The respective phenomenon is known as cup-cone fracture. It is shown that the model is able to predict the failure mechanism, which consists of normal fracture in the center and combined normal/shear fracture in the so-called “shear lips” at the specimen’s rim. The damage evolution and crack path predicted by the model are presented. The effect of the normal and shear failure parameters on the crack-deflection point and several aspects of the finite element mesh are discussed.