高压输电线路在线监测设备无线供电磁耦合机构优化

对高压输电线路进行实时精准的在线监测是保障电网稳定运行的有效手段。磁耦合共振无线供电为解决在线监测设备供电困难的问题提供了一种可行方案,但传统磁耦合共振系统耦合程度弱,传输效率对传输距离变化敏感,总体性能欠佳。基于电路模型分析了耦合线圈互感对传输效率的影响,提出了考虑线圈与磁芯耦合影响关系的联合优化方案从而提升传输性能。仿真和实验结果验证了在同轴间距、水平和角度偏移变化时的系统效率提升。为提升磁耦合系统传输效率和距离提供了一种有效方案。     

A Novel Volume-Stable Collagen Matrix Induces Changes in the Behavior of Primary Human Oral Fibroblasts,Periodontal Ligament,and Endothelial Cells

The aim of the present study was to investigate the influence of a novel volume-stable collagen matrix (vCM) on early wound healing events including cellular migration and adhesion, protein adsorption and release, and the dynamics of the hemostatic system. For this purpose, we utilized transwell migration and crystal violet adhesion assays, ELISAs for quantification of adsorbed and released from the matrix growth factors, and qRT-PCR for quantification of gene expression in cells grown on the matrix. Our results demonstrated that primary human oral fibroblasts, periodontal ligament, and endothelial cells exhibited increased migration toward vCM compared to control cells that migrated in the absence of the matrix. Cellular adhesive properties on vCM were significantly increased compared to controls. Growth factors TGF-β1, PDGF-BB, FGF-2, and GDF-5 were adsorbed on vCM with great efficiency and continuously delivered in the medium after an initial burst release within hours. We observed statistically significant upregulation of genes encoding the antifibrinolytic thrombomodulin, plasminogen activator inhibitor type 1, thrombospondin 1, and thromboplastin, as well as strong downregulation of genes encoding the profibrinolytic tissue plasminogen activator, urokinase-type plasminogen activator, its receptor, and the matrix metalloproteinase 14 in cells grown on vCM. As a general trend, the stimulatory effect of the vCM on the expression of antifibrinolytic genes was synergistically enhanced by TGF-β1, PDGF-BB, or FGF-2, whereas the strong inhibitory effect of the vCM on the expression of profibrinolytic genes was reversed by PDGF-BB, FGF-2, or GDF-5. Taken together, our data strongly support the effect of the novel vCM on fibrin clot stabilization and coagulation/fibrinolysis equilibrium, thus facilitating progression to the next stages of the soft tissue healing process.     

Micron-Scale Soft Actuators Fabricated from Multi-Shell Polystyrene Particle-Gold Nanoparticle Nanohybrids

Actuators made of soft matter are needed for a variety of fields ranging from biomedical devices to soft robotics to microelectromechanical systems. While there are a variety of excellent methods of soft actuation known, the field is still an area of intense research activity as new niches and needs emerge with new technology development. Here, a soft actuation system is described, based on a core-multi-shell particle, which moves via photothermal expansion. The system consists of a novel polystyrene-based thermally expandable microsphere, with a secondary shell of a silicate-silane graft copolymer, to which gold nanoparticles are covalently linked. The gold nanoparticles act as photothermal nano-transducers, converting light energy into the thermal energy necessary for microsphere expansion, which in turn results in material movement. Actuation is shown in isolated particles in thermal and photothermal regimes using metal ceramic heaters or 520 nm laser illumination, respectively. Macroscale actuation is demonstrated by making a composite material of particles suspended in the transparent elastomer polydimethylsiloxane. The sample demonstrates an inchworm-like movement by starting from an arched geometry. Overall, this work describes a new particle-based actuation method for soft materials, and demonstrates its utility in driving the movement of a composite elastomer.     

Effects of micro-sized mullite on cristobalite crystallization and properties of silica-based ceramic cores

Silica-based ceramic cores are extensively used in investment casting process, during which they must exhibit sufficient flexural strength and deformation resistance. In this study, micro-sized mullite was used as an additive to silica-based ceramic cores to optimize their high temperature properties. To investigate the effects of micro-sized mullite on cristobalite crystallization, mechanical and thermal properties of silica-based ceramic cores, ceramic cores with different amounts of micro-sized mullite were fabricated. The XRD results showed that additional micro-sized mullite diminished the crystallization of cristobalite at high temperatures, primarily caused by the mullite related compressive stresses on the surface regions of fused silica particles. Three-point bending tests and SEM results showed that micro-sized mullite had a more significant effect on the flexural strength of ceramic cores compared with conventional additives. Particularly, the fracture mechanism of silica-based ceramic cores had been changed from intergranular fracture into a mixed fracture consisting of both intergranular and transgranular fracture. The mechanical and thermal properties of ceramic cores were all reduced slightly as the mullite content exceed 4.6 wt%. Hence, to optimize the properties of silica-based ceramic cores, the micro-sized mullite content should not exceed 4.6 wt%.     

铜基薄壁热管应用现状及发展趋势

在5G通信技术及消费电子行业快速发展的背景下,铜基薄壁热管被广泛应用于大功率电子设备散热领域。通过介绍目前应用较广的几种热管,对其结构、特点及应用范围进行了对比 ;阐述热管在加工制备和使用过程中存在的一些问题和缺陷,对表面缺陷形成机理进行分析,并对热管未来的发展趋势进行了展望。     

LF软吹时间对硅脱氧弹簧钢氧化物夹杂控制影响

 对于一些采用硅锰脱氧冶炼工艺的特殊钢,为保证钢水洁净度,常会选择较长时间的LF软吹处理,导致过程能耗增加。通过工业试验,借助FEI Explorer 4自动扫描电镜检测,研究不同LF精炼软吹时间对硅脱氧弹簧钢55SiCr铸坯氧化物夹杂成分、数量的影响;并采用夹杂物极值统计法,对比评价不同LF精炼软吹时间对应成品盘条横截面最大夹杂物尺寸控制情况。结果表明,在LF软吹10 min与软吹40 min 两种工艺条件下,铸坯中尺寸大于5 μm的氧化物夹杂成分接近,均在CaO-SiO₂-Al₂O₃相图中假硅灰石、钙长石和钙铝黄长石共晶低熔点区,其中软吹10 min工艺铸坯氧化物夹杂组成落入低熔点区的数量所占比例更大。LF软吹10 min与软吹40 min铸坯中尺寸大于5 μm的氧化物夹杂数量密度分别为11.70个/100 mm2和14.59个/100 mm2,尺寸大于15 μm 的氧化物夹杂数量密度分别为0.53个/100 mm2和1.65个/100 mm2,LF软吹10 min工艺铸坯大尺寸氧化物夹杂数量密度略低于LF软吹40 min工艺。当预测面积为30 000 mm2时,两种LF软吹时间对应成品盘条横截面最大夹杂物尺寸分别为27.1 μm和28.1 μm,盘条最大夹杂物尺寸控制无显著差别。结合硅锰脱氧钢中大尺寸低熔点CaO-SiO₂-Al₂O₃系夹杂物主要源自钢包渣乳化卷入,具有与钢水和氩气泡界面接触角很小、难以通过吹氩上浮去除的特点,建议硅锰脱氧钢LF软吹过程按短时间快节奏进行控制。     

管模工艺的优化

管模是生产离心球墨铸铁管的模具,其毛坯的锻造成型非常困难。本文介绍了管模锻造工艺的优化过程。采用优化后的工艺,解决了管模在锻造生产中出现的各种问题,使管模的成品率大幅提高。同时也为长筒型锻件的成型提供了可靠的参考依据。     

压铸模具型芯变形失效的研究分析

压铸模具的型芯变形失效很容易造成铸件的成批量报废.文中对于一失效型芯进行了分析研究,结果表明,其弯曲变形是由于受到不断循环的热作用及金属液的冲击所造成的微小变形积累造成的;同时,型芯的硬度在不同的部位均有下降,其中在冲击部位下降幅度最大.型芯在与铝液接触的表面会形成过渡层,圆形的型芯横截面会发生变形.采取有效的措施是可以避免田型芯弯曲变形所造成的铸件成批量报废的.     

Mo的替代对FeNbBCu软磁纳米晶合金磁谱的影响

本文研究了Fe82Nb7-xMoxB10Cu1(x=0,1,3,5）系列纲伙晶软磁合金中Mo的含量对磁导率谱（频率范围1kHz-1MHz)的影响，并用畴壁钉扎理论进行了解释，在磁谱中观测到随着Mo含量的增加，弛豫频率线性地上升，μ′随外加磁场幅度变化曲线表明其原因在于Mo的替代导致了钉扎场的增强。     

CHARACTERISTICS OF INTERNAL FRICTION AND MODULUS ASSOCIATED WITH NON-EQUILIBRIUM DIFFUSION-TYPE PHASE TRANSFORMATION IN EUTECTOID Al-Zn ALLOY

The characteristics of the low frequency internal friction and the modulus effect associatedwith the non-equilibrium spinodal pretransformation and the following discontinuous trans-formation was investigated in an as-quenched eutectiod Al-Zn alloy.It was observed that theloss of the stability in the lattice,which corresponded to the large-amplitude long-wavelengthstatic concentration wave in the non-equilibrium spinodal pretransformation,did not induceany effect of localized soft modulus.Although there are two aging internal friction peaks inphase transformation which correspond to the appearance and disappearance of the coherencyin spinodal pretransformation and the maximum of the interface area in the discontinuoustransformation respectively,the effect of localized soft modulus did not take place yet.