Waste-to-energy based greenhouse heating: exploring viability conditions through optimisation models

An optimisation approach is proposed in order to assess the technical and economic feasibility of a renewable-energy-based greenhouse in North-Eastern Italy. A floor heating system that can exploit a low-temperature heat flow coming from the condenser of a waste-to-energy plant is chosen for the greenhouse and designed developing a non-linear optimisation model, solved by a genetic algorithm. In order to determine under what conditions the combination of a floor-heating-based greenhouse with a waste-to-energy plant can be profitable, a mixed integer optimisation model is introduced to allow selection of the minimum cost fuel solution as a function of different design variables of the greenhouse, such as indoor temperature settings and floor area. The ranges within which the renewable energy solution can lead to significant savings in comparison to traditional fossil fuel are identified both from the point of view of costs and of environmental impact. Furthermore, the sales prices for waste heat that would make investment in the renewable energy solution attractive for potential entrepreneurs are given.     

VSAP软件在碟式太阳能热发电系统设计中的应用

进行碟式太阳能热发电系统结构设计的关键是保证其可靠性和稳定性，为此，本文用VSAP有限元软件完成了系统结构的设计计算与分析，并在此基础上解决了聚光器配重、改善系统稳定性等问题。     

Uneven gridding of thermal nodal networks in floor heating simulations

In this paper, the use of an uneven nodal network in floor heating simulation with finite difference heat balance method is examined. Two floor heating test cases, homogenous and multilayer floor, are presented. Temperature distributions on the floor surface and heat flows through the floor surface are simulated with even and uneven gridding approaches. It is shown that the total number of nodes can be reduced by placing the densest gridding in sections where the curvature of the temperature gradient is steepest.     

新型太阳能空调节能窗的原理与结构

基于太阳辐射的光变特性和多层薄膜材料的变色效应，分析了新型太阳能节能窗对热候，冷候和温候空调的工作原理，重点讨论了可实现外加参量的动态调节透光性的薄膜材料的性能。     

利用热管纺丝技术一步法生产FCY

利用平板型热管纺丝装置对普通高速纺丝机进行技术改造，并一步法生产出充分结晶的ＰＥＴ纤维（ＦＣＹ）。该纤维可直接用于织造，调节热管温度、热管安装位置可获得满足后道工序不同需要的ＦＣＹ。     

耐高温辐射涂料在加热炉上的应用

分析了耐高温辐射涂料(HT—1)在加热炉应用的节能机理,工业实验取得良好效果。     

中国先进研究堆冷中子源核发热和冷中子增益研究

为准确计算和研究中国先进研究堆（CARR）冷中子源装置氢系统的核发热和冷中子增益，建立了一整套计算方法。对参考堆的验证计算证明了该方法的正确性和有效性。对影响CARR冷中子源核发热和冷中子增益的各种因素（如慢化剂、冷包材料、冷包形状等）进行了计算和优化选择。结果表明：在核发热量较小的条件下获得了较好的冷中子增益。     

Improvement of device performances by thin interlayer in conjugated polymers/methanofullerene plastic solar cell

Recent studies have reported that a thin interlayer between poly(3, 4-ethylene dioxythiophene)-poly(styrene sulfonic acid) (PEDOT: PSS) and an emissive polymer layer leads to a large increase in the performances of polymer light-emitting diodes (PLEDs) by preventing significant quenching of the radiative excitons at the PEDOT: PSS interface; therefore, acting as an efficient exciton-blocking layer. Using the similar idea, a thin interlayer was fabricated between PEDOT: PSS and the active layer of conjugated polymers/methanofullerene composites in a plastic solar cell. The interlayer consisted of a poly(fluorene)-based hole transporter spin-coated directly on top of the PEDOT: PSS layer. The devices with the interlayer exhibited a higher efficiency than in those without the interlayer.     

宣钢棒材加热炉悬臂辊道的改进

对宣钢棒材加热炉出入炉悬臂辊道漏水、烧损等现象进行了分析，提出了改进措施。     

Photovoltaic properties of SnCl2Pc films and SnCl2Pc/pentacene heterostructures

The optical and photovoltaic properties of dichlorotin phthalocyanine (SnCl₂Pc) films and SnCl₂Pc/pentacene (Pn) heterostructures (HS) have been studied. Weak bands at 1.35, 1.52 and 2.05 eV have been found in absorption and modulated photoreflectance spectra of SnCl₂Pc films. These bands can be caused by the formation of charge transfer states. The low concentration of recombination centers of charge carriers has been formed on a free surface of SnCl₂Pc films. This concentration essentially decreases at air evacuation before vacuum deposition of a Pn layer. Therefore, interface with an insignificant recombination rate of charge carriers is formed for SnCl₂Pc/Pn HS.