超、高超声速大长细比飞行器气动特性快速计算

将牛顿碰撞类方法推广应用于超、高超声速细长体导弹的气动特性预测.根据飞行器的外形特征,将外形分成几个部分,根据各自几何特点和流场特性,对不同部分及其迎风面和背风面选用不同的方法,计算方法适用于Ma=3~25、攻角0~30°范围内大长细比导弹类飞行器的气动力特性快速计算.经过与风洞试验数据的对比,证明此方法具有计算速度快、精度高的特点.     

基于正交试验法的平面磨削用量的优选

通过在M7130平面磨床上的试验,采用正交试验方法对平面磨削用量进行分析研究,从而进一步了解平面磨削用量对已加工表面质量的影响规律,及其影响的主次关系,为合理选择平面磨削用量提供可靠的依据.     

新型小径深井救捞装置

此种小径深井救捞装置运用凸轮轨迹控制原理实现托爪(托捞部件)的顺利转起、放下与固定,操作简便,功能可靠,节能环保,是理想的小径深井救捞装置.该装置也可用于矿井、峡谷、墙(楼)缝、冰窟等条件下的救捞.     

青菜冲中磷矿压的分析与控制

对开阳磷矿马路坪矿段延伸开采工程中采用新型锚杆护顶房柱法出现的地压显现问题进行了详细的分析 ,并提出了地压控制措施。     

矿物绝缘电缆铜带纵包氩弧焊焊接连续轧制生产工艺

简述了矿物绝缘电缆铜带纵包氩弧焊焊接连续轧制的生产工艺,并对该生产工艺中可加硅油氧化镁粉运用、定芯管的设计、氩弧焊焊接、轧辊轧制以及中频感应退火作了描述,同时对连续生产过程中相关工艺作了说明。     

检定S型短型热电偶的4种不同冷端补偿方法之比较

检定长度在200～700 mm范围内的S型热电偶时,由于参考端温度大都处于室温或者波动的温场之中,需要将参考端温度恒定在0℃或采取修正、补偿等措施进行修正。现采取检定中最常用的4种不同的冷端补偿方法检定同一支S型短型热电偶,对结果进行比较分析,得到这4种不同的冷端补偿方法的优劣性及其准确度排序。结果表明,将参考端应用达到一等标准热电偶准确度水平的同极性热电偶丝延伸至参考端恒温器方法能获得较为理想的补偿效果。     

Low cost high sensitivity dynamometer

This paper concerns the dynamometer with magnetoelectric actuator. Its construction and functionality were described. The conducted tests allow to estimate a number of metrological parameters of the dynamometer. Several practical applications together with their results were shown.     

A new procedure for measuring geosynthetic friction with an inclined plane

A method for the determination of the friction angle of geosynthetic interfaces (specifically those in contact with soils at very low normal stresses) using an inclined plane is described by the European Standard EN ISO 12957-2. Following this “Standard Displacement Procedure”, the friction angle of a geosynthetic interface is determined using a displacement criterion between the tested geosynthetics. However, the “Standard Displacement Procedure” seems to be poorly suited for many interfaces. Herein, a new procedure is proposed, called the “Force Procedure”, which consists of measuring the force required to restrain a box on top of the interface beyond a limiting value of sliding displacement. With the “Force Procedure”, the friction is determined from the curve of friction mobilization versus plane-inclination. The angle determined with the “Force Procedure” is not sensitive to the conditions of the test and is more representative of real-world conditions, as it takes into account displacements observed in the field. Based on the results of this study, it seems reasonable to suggest a revision of the EN ISO 12957-2 standard testing procedure.     

提高弱电网中光伏并网逆变器稳定性的控制方法

随着电网中分布电源的增加,电网呈现出了弱电网特性。电网阻抗使得逆变器与电网之间存在相互作用,对逆变器的稳定性产生影响,威胁着系统的安全稳定运行。从相位角度分析了电网阻抗对系统稳定性的影响,电网阻抗的增加会导致系统相位降低,继而使系统进入不稳定状态。为增强系统在电网阻抗变化过程中的鲁棒性,提出一种基于神经网络的逆变器变增益控制方法。该方法采用一定的控制环节补偿系统相位,采用径向基函数神经网络建模的方法实时调整系统的开环截止频率,使相位裕度始终保持最大值。仿真结果验证了本文的理论分析。     

Comparing true and false confessions among persons with serious mental illness.

Over the past decade, knowledge on false confessions has grown tremendously. However, a similar knowledge base on true confessions has not. In the present study, independent, self-reported true and false confession experiences of persons with serious mental illness were compared. In addition to examining the crimes and police questioning that led to the true or false confession, we investigated the reasons behind the confessions and the eventual case outcomes. We found that, in comparison to true confessors (n = 30), false confessors (n = 35) were questioned more times, took longer to confess, perceived the evidence against them to be weaker, and reported significantly more external pressure and less internal pressure. Moreover, of those participants who were convicted, false confessors were four times more likely to receive a prison sentence than true confessors. (PsycINFO Database Record (c) 2011 APA, all rights reserved)