石油天然气长输管线用钢新进展

本文介绍了１９９０年以来国外在石油天然气长输管线用钢方面的最新成果，以获得较低的强度和韧性匹配为目的经轧后加速冷却工艺后的钢的强度的预测和控制；具有优良抗氢致裂纹的含硼、微碳、低硫、Ｎｂ－Ｔｉ微合金化、Ｘ６５－Ｘ８０级管线钢的开发，满足于特殊性能要求的ＴｉＯ处理技术及Ｘ８０级ＴｉＯ细化晶粒钢、低硬度和低屈强比钢，以及复合板加工耐腐蚀钢管的生产。     

涟钢连铸优质钢的实践分析

本文介绍涟钢第一炼钢厂１号小方坯连铸机浇铸优质钢的生产实践，并探索连铸优质钢的途径。指出为保证质量，必须严格保证钢水质量，控制合适的浇铸温度，拉坯速度和冷却强度；钢水必须吹氩；采用大容量中间包和伸入式水口保护渣浇涛，确保连铸机的状况良好。     

型钢厂试轧美标H型钢性能分析研究

分析了型钢厂试制热轧美标H型钢低温冲击韧性偏低的原因，并在此基础上提出了对生产工艺的优化与改进。     

A new alloy design concept for austenitic stainless steel with tungsten modification for bipolar plate application in PEMFC

The feasibility of a new alloy design concept utilizing the principle of ‘tungsten bronze effect’ is critically evaluated for the development of metallic bipolar plates for proton exchange membrane fuel cell (PEMFC). An austenitic stainless steel (ASS) is modified with W and La to improve the stability of the passive film in an acidic environment as well as to reduce the contact resistance by the tungsten bronze effect. The experimental ASS containing W and La was evaluated in a simulated PEMFC environment of H₃PO₄ and H₂SO₄ solutions at 80 °C, and the electrical property was evaluated by performing a contact resistance test. The test results show that the ASS modified with W and La has good passive film stability for corrosion resistance and low contact resistance. The X-ray photoelectron spectroscopy (XPS) analysis clearly suggests the possibility of the tungsten bronze effect from the change in valency state of W⁶⁺ to W⁵⁺ in the passive film formed on the modified ASS. The feasibility of a new alloy design concept utilizing the ‘tungsten bronze effect’ is well demonstrated; however, more study is highly required for the development of metallic bipolar plates of PEMFC.     

Effect of RE on Granulation of Eutectic Carbide in Ledeburite Steel

ＲｅｃｅｎｔｌｙｔｈｅｂｅｎｅｆｉｃｉａｌａｃｔｉｏｎｓｏｆＲＥｏｎｉｒｏｎａｎｄｓｔｅｅｌｓｈａｖｅｂｅｅｎｒｅｐｏｒｔｅｄａｒｏｕｎｄｔｈｅｗｏｒｌｄ．ＲＥｃａｎｎｏｔｏｎｌｙｄｅｏｘｉｄｉｚｅａｎｄｄｅｓｕｌｐｈｕｒｉｚｅｔｈｅｍｅｌｔａｎｄｆ...     

现浇混凝土构件与砌体接触面收缩和温度应力裂纹的探讨

分析讨论了建筑物由于收缩及温度应力而引起的过纹，提出了在设计施工中应考虑的问题和采取的防止措施。     

1997年度大中型钢铁企业节能工作情况综述

第九次节能工作会议后，冶金工业掀起了节能降耗的新高潮。各企业都从本单位 实际出发，狠抓节能降耗工作，节能增效成绩显著。大中型钢铁生产企业全年节能３５０万ｔ标煤，超 出１９９７年初冶金工作会议确定的全行业节能３００万ｔ目标。创造效益２８亿元。     

添加高速钢粉对烧结钢组织与性能的影响

研究了添加高速钢粉对烧结钢组织与性能的影响。实验结果表明，含２０％高速钢的烧结钢综合力学性能最好；添加高速钢粉能导致烧结钢密度减小的冲击韧性降低，当高速钢含量增中时，硬度随之增加，烧结钢中残余奥氏体和马氏体的含量与高速钢的含量呈线性关系。烧结钢中的马氏体显微硬度很高，它主要原高速钢粒子和原铁粒子的连接区域形成。     

Plasma lens experiment at the final focus test beam

The proposed plasma lens experiment at the Final focus Test Beam (FFTB) facility of the Stanford Linear Accelerator Center has been approved by the adminstration. The experiment would allow the examination of plasma focusing devices for particle beams in the parameter regime of interest to future high-energy colliders. It is expected to lead to compact plasma lens designs capable of focusing the beam to unprecedented small spot sizes.     

快速钨铼热电偶的测温误差

本文用热电偶误差计算的通用方法（极限误差表达法）分析了构成快速钨铼热电偶测温误差的因素，从量的角度探讨了各因素对总的误差的影响，对如何认识快速钨铼热电偶的测温精度，提出了可供参考的观点。