Inhibition of atmospheric corrosion of mild steel by sodium benzoate treatment

The objective of this study was to evaluate the effectiveness of sodium benzoate as an inhibitor to slow down or prevent atmospheric corrosion/discoloration of the local mild steel during storage in the Arabian Gulf region. Test specimens were prepared from locally produced reinforcing steel products. The inhibitor solution was applied on steel specimens at a concentration of 100 mM for 1 day at room temperature. Wooden exposure racks were used to hold as-received and inhibitor-treated specimens during atmospheric exposure for different periods. Corrosion was evaluated through weight loss determination and electrochemical technique. As expected, the Arabian Gulf atmosphere was corrosive on the as-received local mild steel. On the other hand, treatment of steel with sodium benzoate lowered its corrosion rate during initial days of its exposure to atmosphere. However, atmospheric corrosion inhibition performance of sodium benzoate deteriorated with exposure time after 30 or more days of atmospheric exposure, and the corrosion rates of sodium benzoate-treated specimens reached that of the unprotected specimens at the end of 90 days of atmospheric exposure.     

Technology transfer projects in developing countries—furthering the Project Management perspectives

This paper attempts to broaden the analysis of the technology transfer phenomenon by refocusing research attention on the level of performance assessment of technology transfer projects. An holistic evaluation framework based on the considerations of an extended Project Life Cycle model is proposed to overcome some of the shortcomings of conventional approaches to project evaluation. This also reinforces the need for open systems thinking in assessing and managing risk of technology transfer projects. The discussion is based on two case studies which articulate the experiences with two integrated mechanisms of technology transfer used in Algeria from 1965 to 1990: turnkey and “product-in-hand”. The aim is to gain a better understanding of the processes of technology transfer and to contribute to the improvement of associated managerial practices in developing economies.     

技术转移对我国制造业企业创新绩效的影响

分别对高新技术企业与一般工业企业、大型企业与中小型企业进行了对比分析，发现高新技术企业比一般工业企业更有吸收能力，而技术转移对中小企业的影响比大型企业大。对参与技术转移及未参与技术转移的制造业企业进行了比较研究，结果证明有技术转移行为的企业具有更优的创新绩效。     

纤维混凝土在水工建筑工程中的应用(上)

概述改性混凝土垢发展情况，介绍纤维混凝土在国内外水工建筑物上的应用实例，提出钢纤维增强钢筋混凝土水工建筑结构强度计算方法。包括受弯构件正截面强度，斜截面抗剪强度的计算；重点介绍了网状钢纤维增强混凝土（FOC）在水工建筑物上的应用，包括在渡槽，闸门，小型拦河坝，轻型岸型等工程上的应用实例，T新梁正斜截面的强度计算，板材承载力计算的方法。     

影响掺矿渣的钢纤维砼强度的主要因素

研究结果表明 :水胶比、胶凝材料用量、钢纤维掺量、矿渣代水泥量对钢纤维砼强度影响显著。当矿渣取代水泥 10 %时 ,钢纤维砼强度最高。经试验选择出一个具有良好和易性和较高强度 (118MPa)的钢纤维砼配合比 ,为掺磨细矿渣的中含量超短异形钢纤维砼的设计和施工提供了试验依据     

建筑墙体表面传热系数辨识研究

对实验房间南向墙体内表面中心区域的换热过程进行实验，发现当风速在0－5．5m/s之间时，表面传热系数在8－18W（m^2.K）之间波动，而风向对墙体表面传热系数影响不大；用辅助变量法分析墙体表面传热过程，并结合实验推导出墙体表面传热系数。模型的预测结果与实测结果吻合良好。     

非关联双模场对Kerr介质中电子绝热跃迁转移现象的影响

本文研究了充满Kerr介质的高Q腔中非关联双模相干态场与级联三能级原子非共振相互作用情况下,电子的绝热跃迁转移现象与非关联场之间的关系。数值计算显示:级联三能级原子在与非关联双模相干态的相互作用下,该现象依然存在,但呈现不同于原子与关联场相互作用的新特征。     

45钢表面超音速电弧喷涂Ti-Al涂层的组织与性能研究

采用自行开发研制的超音速电弧喷设备，在45钢表面制成了钛铝合金复合涂层。并利用金相显微镜、X射线衍射仪、扫描电镜、电子探针，对涂层的成分、相结构、显微组织及其结合强度、显微硬度进行了研究。结果表明，利用超音速电弧喷涂设备，可以在45钢表面形成 度高、孔隙率低，结合强度较好和硬度高的Ti-Al合金涂层。     

钢纤维喷射混凝土作为面板材料的可行性研究

钢纤维混凝土作为一种新型增强材料，以其较好的受力变形特性在水利水电，交通，海岸防护，港口及军事等诸多工程中得到了广泛的应用。针对混凝土面板堆石坝面板的受力变形特点，为改善水布垭面板堆石坝面板的受力条件，提高其防渗能力，同时方便施工，现提出采用钢纤维喷射混凝土作为水布垭面板堆石坝面板材料的新构想，并通过对钢纤维喷射混凝土的物理力学特性及堆石坝面板受力变形进行分析，为钢纤维喷射混凝土在水布垭面板堆石坝面板中的实际应用提出了建议方案。     

高炮火控系统滤波器的设计

对目前高炮火力控制系统目标滤波与预测进行了分析与研究．在此基础上结合工程实际设计了一种α-β滤波器．该滤波器的原理是把在连续系统中频率域的要求和在离散系统中Z域的要求转换成时域中在典型信号激励下的时间响应的特征值的要求．从而在时间域中以特征值的要求进行综合．再把综合的结果转换回Z域中．最终得到所确定的α-β滤波器．文中给出了α-β滤波器的Z传递函数．分析了α-β滤波器参数的确定．对α-β滤波器的静态误差进行了研究．对设计方案进行了计算机仿真和实际应用．