粘土砂旧砂再生效果与其含水量的关系

在影响粘土砂旧砂再生效果的诸多因素中,旧砂中水分含量是最重要的因素。本文就水分含量对再生效果的影响规律、再生效果最佳的水分含量等进行了研究和分析,得出了如下结论:并非含水量越低再生效果就越好,而是存在一个去泥率低谷区;再生效果最佳的适宜水分含量为1～2%。     

高压切割喷嘴冲击磨损的数值分析

以复用矿井含煤颗粒的水对高压切割喷嘴的磨损物理问题为研究对象,采用计算流体力学理论进行数值计算,分析讨论了质量浓度为10、15、20、25、30、40 mg/L条件下速度、剪应力、磨损的分布以及变化关系。计算、分析结果表明:磨损主要发生在出口部位和锥体的后半部份,入口部份和锥体前半部份磨损较小;入口部位、锥体部位磨损量、剪应力随质量浓度增加变化较小;出口部位磨损量在质量浓度为10～20 mg/L减小较快,超过20 mg/L后变化不大;出口部位流体速度、磨损量、剪应力与质量浓度间存在对应关系。煤粒入口速度与混合物速度相同、锥体部位煤粒流体速度低于锥体部位混合物速度(平均值)约79.4%;煤粒出口部位速度随质量浓度的增大而呈现先增加后减小的趋势,速度最大值发生在浓度20 mg/L。     

An extension of likelihood-ratio-test for testing linear hypotheses in the baseline-category logit model

A new family of test statistics for testing linear hypotheses in baseline-category logit models is introduced and its asymptotic distribution is obtained. The new family is a natural extension of the classical likelihood ratio test. A simulation study is carried out to find new test statistics that offer an attractive alternative to the classical likelihood ratio test in terms of both exact size and exact power.     

Continuity versus Discretization

The threefold interest in architecture, biology and mathematics motivated us to examine and justify new architectural forms. We discuss some notions of rhythm: Euclidean, morphogenetic and morphologic. Contemporary relationships between structure and form are based on the generation of shape by technological processes, thus the resulting objects are restricted to their material expression. Here a phenomenological organisation of form and its continuity with the landscape arise out of the mathematical and architectural creativity. The use of the computer is applied from outside to inside instead from inside to outside; this means that we are dealing with the organisational processes via continuous methods instead of evolutionary processes given by computer simulations, known as genetic algorithms, where the resulting configurations are reduced to a matter of routine. The role of design as an aesthetic component innovates the theoretical framework of structural engineering to establish the architectural environments.     

坦克设计新发展

本文提出“针对式坦克发展战略”主要内容,它要求“突破性新概念高新技术”,获得“减法设计方法”,因而形成“坦克发展新道路”.运用“系统总体取胜”的系统工程理论,处理好坦克全系统“综合”、全系统与分系统“配置”、分系统与分系统“匹配”、全系统与人及作战环境“适应”四大关系,以“相互同水平组合”替代“单项高水平爬坡”.通过“从系统总体着眼、由边际零部件突破”的途径,善于从各个部分或部件之间的结合部加以突破,实现坦克设计新发展.     

Synthesis and characterization of novel blue azo‐dye derivatives containing acrylate group for dye‐based color filters

Abstract— Even though dyes have a fine resolution and good chromaticities, they are not widely used as coloring materials for color filters (CFs) due to their low thermal stability and chemical resistance. A series of azo‐dye derivatives, which consist of two cross‐linkable acrylate or methacrylate groups to improve thermal and chemical properties, have been synthesized and used to fabricate color filters. The spectral properties and chemical/thermal stabilities of the fabricated CFs were investigated by comparing dye‐based CFs, without a complicated dispersion process, but with pigment‐based CFs using dispersed pigment. Also, more properties including the development test and surface morphologies lithographic properties were studied. The synthesized azo dyes were characterized by elemental analysis, UV‐visible spectra, IR, mass, and ¹H‐NMR spectra.     

The scope of artificial neural network metamodels for precision casting process planning

Precision investment casting process planning has been tackled in the past according to experience. Recently, casting simulation software is being increasingly used to predict product quality by implementing ‘what-if’ scenarios. Input parameters include relatively simple factors such as mould temperature, melting temperature, casting material. They also include factors whose influence is more complex to quantify, such number and location of feeding points, diameter and length of inflow channels, angle of channel with respect to the main sprue axis. Simulation results cannot help the engineer for workpieces other than the one simulated. In this paper a series of feedforward artificial neural network (ANN) models is presented aiming at such generalisation. To achieve this, a large number of software simulation runs were conducted for a number of different small parts, with varying runner geometry and casting conditions. The parameters characterising part geometry have been chosen to be surface area and volume-to-area ratio. The different ANN models predictive capabilities are reflected to the respective training and generalisation errors. A user-friendly interface has been conducted for model execution in a complete application, whose main virtue is expandability.     

Structural and electrical properties of mixed oxides of manganese and vanadium: A new semiconductor oxide thermistor material

Binary oxides of manganese and vanadium have been synthesized by solid state sintering, in which the mass ratio of the individual components Mn₂O₃ and VO₂ have been varied from 90:10 to 5:95. The bulk ceramic samples were characterized by X-ray diffraction and scanning electron microscopy with energy dispersive X-ray analysis. The initial compositions either rich in Mn₂O₃ or in equi-proportion by mass with VO₂ yield β-Mn₂V₂O₇ or a new crystalline form of Mn₂V₂O₇, with unit cell parameters: a = 7.73091 Å, b = 6.640788 Å, c = 6.70779 Å α = γ = 90° and β = 98.7086° which is designated as γ-Mn₂V₂O₇. The compositions, richer in VO₂ produce MnV₂O₆ co-existing with V₂O₅ the proportion of which increases with increase in VO₂. The surface microanalysis shows a spherical-granular morphology in Mn₂V₂O₇ structure and plate/rod-like structures co-existing with granular morphology in case of MnV₂O₆ together with V₂O₅. The electrical parameters of the negative temperature coefficient thermistors were determined. Depending on the constituent oxide composition, the NTC thermistors showed room temperature resistivity in the range of 6.52 × 10² to 6.1 × 10⁶ Ω-cm. The thermistor constant and activation energy are in the range of 0.12–0.458 eV and 1393–4801 K, respectively.