五年来我国有色金属工业结构调整状况及对策建议

本文总结了近5年来我国有色金属工业结构调整和产业升级的基本情况,即中国有色金属工业集约化程度、技装备水平提高,生产成本下降,行业整体实力增强。而这些成绩的取得都有赖于国家积极的财政政策及“债转股”政策的推动,有赖于深化企业改革及发挥市场资源配置的作用等等。同时,针对对当前及今后有色金属工业结构调整和产业结构升级所面临的问题,提出了有关对策建议     

等腰梯形焊管孔型设计

在对等腰梯形焊管形状分析的基础上。精确计算了其周长，并在数学推导基础上，计算了各架次孔型尺寸，完成了等腰梯形焊管轧辊设计，使用结果表明；设计方法合理，孔型尺寸计算准确。使用效果良好。     

安钢高线粗中轧机导卫设计特点

介绍了安钢自行设计的高线粗中轧机导卫装置的设计原则和特点。     

Paradoxical effects of information presentation formats and contextual interference on transfer of a complex cognitive skill

In a 2 × 2 factorial design the effects of (1) information presentation format and (2) contextual interference on training behavior, transfer performance and mental effort were studied for learning troubleshooting skills with a computer-based simulation. Participants studied information about the functioning of an alcohol distillery system (system principles) prior to practicing troubleshooting skills. Regarding the first factor, an expository (Exp) format, in which system principles, examples and a troubleshooting strategy were presented in a textual form, was compared to an inquisitory (Inq) format, in which participants had to predict the behavior of the system after they studied the system principles and in which demonstrations of the troubleshooting strategy were given. With regard to the second factor, a low contextual interference (LCI) condition in which participants practiced to diagnose types of system failures in a blocked schedule was compared to a high contextual interference (HCI) condition, in which different failure types were practiced in a random schedule. The main hypothesis is that the Inq and HCI conditions promote the development of cognitive schemata that enable learners to diagnose a malfunctioning system component by interpreting symptoms in terms of violations of system principles. Hence, they are expected to show higher transfer performance than participants in the traditional Exp and LCI conditions, who are believed to develop schemata containing associations between symptoms and malfunctioning components that are context-bound and less useful for diagnosing new failures. Contrary to the predictions, the traditional conditions (Exp and LCI) showed higher performance on a transfer test two weeks after training. Possible explanations for this result are discussed.     

摩托车起动电机安装设计及工艺保证

介绍摩托车起动电机的安装设计原则和方法，安装误差的形成与计算，以及达到安装设计要求的工艺保证措施，同时还分析了在检测和加工中所存在的一些做法。     

结构工艺性冲突解决策略的研究

通过分析各种冲突解决方法的特点，提出了一种冲突的集成解决方案。采用面向对象的Object Pascal语言编制了一个实例，给出了该方法在零件结构工艺性设计中的具体应用。     

设计模式改善程序结构的探讨

介绍了设计模式在解决特定问题过程中的基本功能作用，分析了设计模式与程序结构之间的关系，并在此基础上讨论了如何使用设计模式来改善程序结构的问题。     

WC含量对弥散强化铜Cu/WC组织与性能影响的研究

对以WC粒子为第二相的弥散强化铜材料的组织与性能进行了研究。在同样条件下，用机械混料方法制备了不同WC含量的Cu/WC复合材料，分别测定了其密度，电阻率和硬度，结果表明：WC粒子是一种较为理想的弥散相，并且WC体积含量为1.2%时，细小的球形状第二相粒子均匀分布，弥散效果好，材料密度，硬度较高，而电阻率较小，综合性能较好。     

用核磁共振技术确定岩石孔隙结构的实验研究

目前核磁共振技术对岩石的孔隙结构进行评价还停留在定性评价阶段。虽然多数核磁实验室开展了核磁共振评价孔隙结构的研究工作，建立了转换模型，但由于转换系数无法有效地确定，还不能进行应用。通过对岩心核磁共振T2谱与压汞孔径分布的对比，建立了转换模型系数与孔渗比的关系，同时考虑了顺磁物质对转换系数的影响，提出了确定转换模型系数的方法，为核磁共振技术进行孔隙结构的定量评价提供了新的方法。