高频地波雷达相位补偿系统

OSMAR2000采用的是“一发八收,收发共用”模式的相控阵高频地波雷达.为了扩大其探测的范围,在新的雷达系统中将采用多发多收的模式,从而导致当信号通过通道后,信号的相位会因受到通道的调制而发生改变,使得雷达无法正常工作,因此需要对通道的相位进行实时监控和补偿.在参考了低频段的相位测量原理和射频段的相移电路的设计理论的基础上,该文提出了基于差分放大器、容阻和容感器件的高频地波雷达收发通道的相位控制系统.     

一种基于DBF的双基地雷达系统的性能分析与实验研究

讨论了一种基于数字波束形成的脉冲追赶式双基地雷达系统的构成和基本工作原理．对该双基地雷达的性能进行了理论分析，并通过实验结果进行了验证。     

不用专门相移装置的三维面形测量

提出一种不需要专用相移装置实现相移，主要利用数字图像处理技术实现三维面形测量的方法，研究结果表明，用原干涉图像及1幅以上的移值条纹图主可能实现物体三维面形的测量。     

金属材料性能试验数据的统计处理

详细阐述了试验数据的表示方法以及数据统计的方法，分析了测量数据的不确定性产生的原因及其确定和测量误差产生的原因及其传递。     

Bandwidth correction for LED chromaticity

The spectral bandwidth formulae of Stearns and Stearns   are generalized for an arbitrary slit function. Correction coefficients are derived in terms of moments of the slit function. Application to model LED spectra measured with a compact, fiber‐coupled spectrometer having bandwidth of order 12 nm, and a nonlinear wavelength scale shows that accurate LED color measurements may be obtained with such an instrument. Fitting of the relatively broad slit function to line spectra for accurate wavelength calibration is also described. Such fitting, coupled consistently with the bandpass correction, improves the accuracy color measurements with a broad‐response spectrometer. © 2006 Wiley Periodicals, Inc. Col Res Appl, 31, 374–380, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20242     

A general variance predictor for Cavalieri slices

A general variance predictor is presented for a Cavalieri design with slices of an arbitrary thickness t ≥ 0. So far, prediction formulae have been available either for measurement functions with smoothness constant q = 0, 1, … , and t ≥ 0, or for fractional q ∈ [0, 1] with t = 0. Because the possibility of using a fractional q adds flexibility to the variance prediction, we have extended the latter for any q ∈ [0, 1] and t ≥ 0. Empirical checks with previously published human brain data suggest an improved performance of the new prediction formula with respect to the hitherto available ones.     

电脑—探针微孔测量方法研究

本文讨论了微孔自动化测量装置的原理与结构。电接触探针在微机控制下,在X方向找中心,在Y方向进行孔径测量。该系统不仅能实现测量过程自动化和测量结果自动显示,而且能自动消除测量工作台丝杠螺母反向间隙对测量精度的影响。     

多量程数据采集记录装置的设计

通常的数据采集与记录装置不易实现多量程测量。通过对标度方程进行分析得知,要改变量程只须改变两个参数——标度因子和量程下限。我们设计了一个使用单片机的多量程数据采集和记录装置,能处理多达256种量程。本文叙述了算法分析、硬件和软件的设计以及该装置的性能指标。     

Some experimental findings in compression-after-impact (CAI) tests of CF/PEEK (APC-2) and conventional CF/epoxy flat plates

Compression-after-impact (CAI) tests have been conducted for quasi-isotropic thick plates with 48 plies by using the NASA method and on plates with 32 plies by using the SACMA method. Specimens are made of CF/PEEK (APC-2) and conventional CF/epoxy for the NASA plates and CF/epoxy for the SACMA plates. In the NASA CAI tests, the sequence of delamination buckling and its propagation is clearly revealed through various experimental techniques. One major technique is moiré topography, and the other is thermo-mechanical stress analysis with a high-accuracy infrared sensor. The arrest of delamination propagation just before catastrophic failure due to high fracture toughness is clearly captured by the moiré camera. This behavior provides good CAI values of CF/PEEK. The initial buckling properties of the delaminated region by the impact are then extensively discussed. Numerical predictions of initial buckling stress have been obtained by modelled geometry of the delaminated region simplified from its precise structure clarified by ultrasonic C-scanning. They agree fairly well with the experimental results. The in-plane stress distribution in the delaminated region before initial buckling is measured by an infrared stress graphic system. This compared favorably with finite element predictions. Two types of symmetric buckling modes with respect to the central plate surface, twin and single peak ones, are experimentally captured.     

直齿圆柱变位齿轮的一种测绘方法

在工程实践中对损坏的无图纸齿轮进行重新制造时，测绘是必不可少的环节。在齿面已被严重磨损的情况下，如何准确地得到齿轮尤其是变位齿轮的各项参数是本文所着重讨论的问题。