实时多任务操作系统响应性能预估和测试

本文给出了作者开发的一个单处理机实时多任务操作系统的响应性能（响应时间，同步时间）的实验结果和／或估算。与国外同期文献发表的数据相比，指标先进。     

Experimental and numerical investigation of fracture in double-edge notched steel plates

Double-edge notched (DENT) steel plates were pulled until complete fracture and several experimental observations were made (using profilometry and scanning electron microscopy). The essential work of fracture (EWF) model was found to be well verified. Numerical simulations—up to the maximum load only—of some experiments were performed using the finite element method (FEM), and incorporating geometric and material non-linearities (large deformation elasto-plasticity). Some experimental measurements were compared with the corresponding numerical computations and excellent agreement was found.     

焊接试样的焊缝外形尺寸对爆炸试验的影响

选用水面舰艇用９４５钢和潜艇用９２１Ａ钢，研究了不同焊缝外形尺寸对爆炸试验中三缺口试样的中央缺口开裂行为的影响。通过大量的试验数据，确定了开裂判据ｅ≤ｅ_ｍ，为试验前预示中央缺口开裂与否提供了可靠的依据。     

注聚采出水分离用动态水力旋流器特性研究

原有的地面工艺和设备已不能满足聚合物驱采出水分离的要求。采用自行研制的动态水力旋流器，在增压与不增压两种工艺流程下，分别进行了流量和转数对分离效率的影响、转数与压力降的关系，以及入口压力与处理量的关系等项试验研究。试验结果表明，与静态水力旋流器相比，动态水力旋流器的分离效率明显提高，一般可提高10％左右；压力损失显著降低，约可减少0．1MPa，足见可在低压下工作，易于实现无泵运行；无泵运行明显比有泵增压运行的分离效率高，但处理量会有所降低。将动态水力旋流器应用于聚合物驱产出水的油－水分离处理是完全可行的。     

二元复合驱采出液矿场处理试验

利用研制的二元复合驱采出液矿场处理装置，对辽河油田兴28块兴191井采出液进行了矿场处理试验。结果表明，采用适宜的破乳剂及处理工艺技术，可以使矿场采出液处理达到净化油含水≤0．5％的指标。     

Bite and unconfirmed failures

Electronic BITE is poor at identifying hardware failure and in present design approaches tends to create the reviled ‘unconfirmed failure’. A different approach to BITE and unconfirmed failure could improve both operational performance and the cost of maintenance.     

广播发射集散控制系统

本文介绍了广播发射台利用计算机技术、网络技术、遥控遥测技术、现代测试手段，对设备进行自动化控制与管理；实现设备技术指标自动测试，发射台无人值班、有人留守，建立机器的计算机档案制度，确保安全优质播出的方法和经验。     

THE FRACTURE MECHANISM OF 475°C EMBRITTLEMENT IN A DUPLEX STAINLESS STEEL

The mechanism of “475°C embrittlement” of a duplex stainless steel was investigated using finite element modelling of the stress distribution at brittle fracture initiation. Brittle fracture initiated at a critical shear stress, which increased with ferrite hardness. The fracture stress was affected by the duplex microstructure. Fracture was nucleated by deformation twins, which were identified using electron back-scatter diffraction. The ductile-to-brittle fracture transition was sensitive to age-hardening and could be described simply by the effect of age-hardening and test temperature on the yield stress.     

制冷系统的节能优化运行

本文通过对制冷系统耗电诸多因素的初步分析 ,采用正交试验、回归计算等手段 ,得出系统耗电与主要因素的函数关系 ,以便通过优化计算迅速找出最佳运行参数 ,指导操作 ,从而达到节能是目的。     

DST压恢法在大港油田的应用

非自喷井解释方法一直是困扰试井界的难题之一。自1995年底应用DKS2．0软件中DST压恢分析法先后处理了大港油田200多层实测资料以来，发现一部分井与常规分析法的处理结果完全不同。这些井多出现在均质无限大油藏，且其压力及压力导数曲线开口小、导数曲线驼峰较小。通过对DST压恢分析法在大港油田应用情况的分析，认为此方法适用于均质非自喷井，尤其是处理低渗且地层受污染井的结果比较符合地层的实际地质情况，其成果的应用对地层改造有一定的指导作用。