LaNiO3薄膜热稳定性的研究

LaNiO3导电金属氧化物薄膜在现代应用科学研究中作为电极和过渡阻挡层倍受青睐，它具有很好的导电特性和稳定性。该文采用射频溅射法制备了具有(100)择优取向的赝立方结构LaNiO3-x薄膜，并进行了原位热处理。实验结果表明，在265℃的处理条件下，LaNiO3薄膜表现出不稳定性，晶格中的氧在2h内失去了2.7％。氧的损失对品格结构没有明显影响，但薄膜的导电性能明显下降，折射率和消光系数也具有相同幅度的下降。对薄膜的应用具有一定的影响。该文从LaNiO3薄膜的导电机理方面对实验现象给出了分析和解释。     

Amorphous chromium silicide formation in hydrogenated amorphous silicon

The interaction between thin films of hydrogenated amorphous silicon and sputter-deposited chromium has been studied. Following deposition of the chromium films at room temperature, the films were annealed over a range of times and temperatures below 350°C. It was found that an amorphous silicide was formed only a few nanometers thick with the square of thickness proportional to the annealing time. The activation energy for the process was 0.55±0.05 eV. The formation process of the silicide was very reproducible with the value of density derived from the thickness and Cr surface density being close to the value for crystalline CrSi₂ for all films formed at temperatures ≤300°C. The specific resistivity of the amorphous CrSi₂ was ≈600 μΩ·cm and independent of annealing temperature.     

具有初曲率板弯曲的边界元分析

由于具有初曲率板弯曲问题的控制微分方程较复杂，直接求解原问题基本解推导边界积分方程较为困难。本文通过引入等效荷载，将此问题的控制微分方程化成与普通板弯曲基本方程形式相同的微分方程，利用一般求解板弯曲问题的边界元法迭代求解，建立了分析具有初曲率板弯曲问题的边界元法。算例表明本方法理论准确、精度良好。     

挡土墙填土曲线破裂面的地震主动土压力分析

在地震作用影响下，墙后填土处于极限平衡状态时，假定破裂面为一条通过墙趾的旋轮线。从墙后土楔中取出一微薄水平层，研究其在水平惯性力下的平衡，得到的地震土压力分布和土压力合力作用点位置均与实验结果相吻合。     

孔径法测量铜带残余应力的试验研究

介绍了用于薄板残余应力测量的新方法——孔径法,该方法是通过测量冲孔直径的变化来间接求出各方向的残余应力;文中详细阐述了残余应力的标定方法;由于可针对不同材料建立了被测材料的平均应力(σ_l)与被测板材宽度(B)、厚度(H)以及冲孔后直径变化率(△D_i/D)之间的数学模型,因而使薄板残余应力测量变得简便而经济;此外还对该方法的分辨率与测量精度进行了实验、计算与分析。     

High-pressure dc sputtering of High-Tc BPSCCO thin films withTc(0) above 100 K

High-T _c Bi(Pb)-Sr-Ca-Cu-O thin films have been made on single-crystal MgO substrates using high-pressure dc sputtering technique. X-ray studies confirm the crystallinity and highly oriented structure withc-axis perpendicular to the substrate. By optimizing the annealing schedule the formation of the high-T _c phase is stabilized. The best film exhibited superconducting transition temperature with zero-resistance temperature,T _c(0), as high as 101 K. Temperature dependence ofJ _c indicates the presence of Josephson-type weak links.     

Surface structure of silver thin films on In2O3:Sn and Al2O 3 †

Surface structure of thin silver films (200 Å) on two technologically important films, indium tin oxide (ITO) and aluminium oxide, has been studied using scanning tunneling microscope. ITO films were prepared by reactive electron beam evaporation. Aluminium oxide films were prepared by oxidizing 2000 Å thick aluminium films evaporated on to H₂ terminated single crystal silicon substrates. The surface structure of silver on ITO and aluminium oxide appeared to be same and was characteristic of Stranski-Krastanov type. The observed asymmetry in the island shape was attributed to the anisotropic nature of the strain fields surrounding the nucleation centres.     

超声波对化学镀Ni－Cr－P非晶态薄膜的金刚石性能的影响

研究了超声波对化学镀Ｎｉ－Ｃｒ－Ｐ非晶态薄膜的金刚石性能的影响。结果表明，超声波可使金刚石表面非晶态薄膜更加均匀和致密，从而提高了抗压强度，氧化温度和晶化后的强度。随超声波频率的增加，金刚石性能有增加的趋势。     

热采水平井整体开发草13块砂砾岩薄层特稠油

热采水平井技术是科学有效开发稠油油藏的重要手段。以胜利油田草13块为例，系统论述了利用热采水平井整体开发具有边底水的砂砾岩薄层特稠油油藏的开发程序和研究方法。在油蒇精细描述的基础上，通过热采筛选、产能评价、直井和水平井数值模拟、开发方式优化及指标预测等油藏工程研究技术方法，综合论证了利用热采水平井整体开发草13块的必要性和可行性，总结了砂砾岩薄层特稠油油藏水平井油藏工程设计中应遵循的原则，并在生产实践中见到明显效果，为胜利油田其它区块和类似油田的开发提供了借鉴和指导。     

Measurement of the thermal diffusivity of thin films on substrate by the photoacoustic method

Measurements of the thermal diffusivity of thin films on substrate have been performed by the photoacoustic method. In order to examine the method we have built a new apparatus and proposed (1) a system calibration procedure using optically and thermally thick reference samples and (2) a data analysis procedure based on the RG (Rosencwaig and Gersho) theory. As a result of using a transparent photoacoustic cell, the systematic errors which are caused by stray light have been reduced. With this apparatus, measurements have been performed on platinum, titanium, and stainless steel (SUS304) thin foils (thickness form 50 to 100 µm) with three different liquid backing materials (water, glycerol, and ethyl alcohol). The reproducibility was within ±7% regardless of film thickness and substrate materials.