空管系统中键盘快捷功能的研究与实现

目前国内空中交通管制系统人机界面的操作越来越趋于人性化,从可用、能用到好用的人机界面发展过程中,软件提供快捷的功能和方便的操作流程起到了很重要的作用,因此研究软件开发对键盘快捷键的支持就显得尤其重要。本文对可以实现的方法进行比较,分析实现方法的优劣,提出了一种实现键盘快捷功能的方法。     

From ethnographic record to system design

This paper explores the issues involved in moving from ethnographic explorations of work in context to a practical contribution to system design. It does so using the example of an interdisciplinary research project involving sociologists and computer scientists in the domain of air traffic control systems. It forms a pair with another paper (Sommerville et al., 1992) exploring these questions from the perspective of our computer science partners. We characterise ethnography as a research method, and consider the differences between undertaking it for strictly sociological or anthropological purposes by contrast with interdisciplinary and design purposes. We summarise some of our results in ethnographic explications of the work of air traffic controllers, and the sociality which it manifests. We describe the dialogues involved in rendering these observations informative for systems design, and the mutual translations implied in attempting to reconcile sociological with software engineering questions about supporting the work. We conclude by specifying some features of cooperative work which an engineering approach is in danger of overlooking; the ways, and limits, in which ethnographers can form a bridge between users and designers; and some of the conflicts of interest entrained in generating technical change.The research is funded by the UK MRC/SERC/ESRC Cognitive Science/HCI Initiative with the title Social Analysis of Control Systems for HCI Design, grant number SPG 8931598. The computer science partners are Professor Ian Sommerville, Dr Tom Rodden, Dr Pete Sawyer and Mr Richard Bentley. Thanks are due to Val King, Kjeldt Schmidt, Ian Sommerville and Tom Rodden for very helpful comments on earlier drafts of this paper.     

专用电话系统集中录音方案

数字录音系统是进行核对和事故追忆与分析的重要设备,目前,轨道交通数字录音系统普遍存在着录音信息不全或造价高昂的问题,在分析专用电话系统的组成及录音现状的基础上,提出了对专用电话系统的集中录音方案,介绍了集中录音的系统原理及特点,证明了集中录音能够满足专用电话系统对重要终端录音的需要。     

Aluminum. II. Derivation of C v0from C p and comparison to C v0 calculated from anharmonic models

The specific heat at constant pressure, C _p, of aluminum measured by Ditmars, Plint, and Shukla has been reduced to the volume V ₀ appropriate for 0 K employing the Murnaghan equation. The C _v0 thus obtained is compared with the theoretical C _v0 calculated in the harmonic and the lowest-order anharmonic approximation from three different pseudopotentials (Harrison, Ashcroft, and Dagens-Rasolt-Taylor) as well as a phenomenological Morse potential. The higher-order ( ⁴) anharmonic contributions are calculated from the same nearest-neighbor Morse potential as in the lowest-order anharmonic theory. The role of the vacancy and the higher-order anharmonic contributions to C _v0 has been examined and we conclude that the ⁴ contributions to C _v0 are much smaller than the vacancy contribution. After removal of the vacancy contribution, the reduced C _v0 is found to be in excellent agreement with the Ashcroft and Harrison pseudopotentials as well as the Morse potential including the ² and ⁴ contributions to C _v0.     

Electrochemical investigation of the iron-containing and no iron-containing AB5-type negative electrodes

The electrochemical behaviour of LaNi_3.55Mn_0.4Al_0.3Co_0.75−xFe_x (x = 0, 0.15, 0.55, 0.75) intermetallic compounds has been studied and presented [C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, Int. J. Hydrogen Energy 29 (2004) 307–311; C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, J. Alloys Compd. 360 (2003) 266–271; C. Khaldi, H. Mathlouthi, J. Lamloumi, A. Percheron-Guégan, J. Alloys Compd. 384 (2004) 249–253]. It has been deduced that the LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compound has interesting electrochemical properties. In this paper we present the electrochemical study of LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compound properties compared with the parent LaNi_3.55Mn_0.4Al_0.3Co_0.75 compound. Several techniques, such as, the chronopotentiometry, the constant potential discharge (CPD), the cyclic voltammetry (CV) and the linear polarization (LP) were applied to characterize these electrochemical properties. The electrochemical discharge capacity of the LaNi_3.55Mn_0.4Al_0.3Co_0.75 alloy increases to reach 294 mAh g⁻¹ after few cycles only (five cycles). However, the activation of the LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 alloy takes more than 20 cycles to be achieved and the obtained maximum discharge capacity is 194 mAh g⁻¹. The hydrogen diffusion coefficient D_H was determined by constant potential discharge and cyclic voltammetry techniques. The obtained values of the LaNi_3.55Mn_0.4Al_0.3Co_0.75 and LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 compounds are 6.29 × 10⁻¹¹ and 7.62 × 10⁻¹¹, and 2 × 10⁻⁸ and 7.5 × 10⁻⁸ cm² s⁻¹ by CPD and CV techniques, respectively. The exchange current density values, determined by a linear polarization technique, are 44 and 27 mA g⁻¹, respectively, for LaNi_3.55Mn_0.4Al_0.3Co_0.75 and LaNi_3.55Mn_0.4Al_0.3Co_0.4Fe_0.35 alloys.     

基于交通信息和配电网全成本电价的电动汽车充电负荷调度方法

电动汽车的集中充电行为会在一定程度造成交通拥堵,为解决这一问题,综合考虑交通信息和电网信息,基于边际定价理论得到配电网节点边际电价和交通阻塞成本,构建电动汽车充电的全成本电价模型。在此基础上,提出一种考虑交通信息和配电网全成本电价的电动汽车充电负荷调度方法。通过仿真算例验证,该方法在满足电动汽车充电需求的同时可以有效缓解交通拥堵。     

基于动态模式分解的移动用户信道容量预测算法

在多输入多输出环境下,为了能够连续预测出移动用户的信道容量并以此合理地分配用户资源,提出了一种基于动态模式分解（DMD）的信道容量预测方法及其优化方法：基于经验模态分解的选择性归一化动态模式分解（ESN-DMD）.仿真结果表明,DMD算法只适用于预测低移速低复杂度的用户信号,ESN-DMD算法可以预测不同移速的用户信道容量.     

大型软包锂离子电池的热物性实验研究

针对大型软包锂离子电池热物性参数的测定问题,提出适用于该型电池的热参数表征方法. 基于准稳态导热原理,建立电池的传热理论模型. 开展实验研究电池的比定压热容和导热系数与温度的依变关系,分析热损对测试结果的影响,对测试方法的有效性进行验证. 结果表明,电池比定压热容随着温度的升高而线性增大,导热系数受温度的影响较小. 在900 s内可以测得电池热参数在10~60 °C下的变化状况,实验验证结果显示测算精度高于92.3%,具有测算周期短、准确度高和测试灵活等优势.     

焊接箱型截面构件在不同焊缝熔深下承载力性能试验研究

为了有效改善大跨度桥梁中管翼缘焊接箱型截面构件的耐久性的问题,提出采用耐候钢代替普通钢的管翼缘箱型截面梁。同时,为了研究耐候钢管翼缘焊接箱型截面构件填充混凝土后在全熔透和部分熔透条件下的单轴承载力性能,开展了焊接矩形截面在三种不同焊缝熔深下的耐候钢管混凝土截面轴压短柱试验研究。分别测试每个试件在单轴压力作用下的静态应变、动态应变,以及竖向位移和侧向位移。对比构件承载力的试验结果及理论分析结果,得出不同熔深下焊接箱型截面管翼缘组合构件的承载力性能。研究结果表明:1）耐候钢管翼缘焊接箱型截面构件的全熔透焊缝承载力高于部分熔透焊缝承载力。2）全熔透试件开裂时的竖向位移较部分熔透试件的位移值大,而不同熔深下构件的横向位移测点L4随轴压荷载的增大而有增加,L3测点横向位移规律不明显。3）不同耐候钢管翼缘焊接箱型截面构件横向整体受拉,局部在顶部角部位置受压。构件的混凝土内部和钢板表面应变情况复杂,规律不明显。     

基于改进YOLOv3的运动目标分类检测算法研究

提出一种基于改进YOLOv3算法的一类运动目标检测算法. 为进一步提高YOLOv3的检测精度,采用基于DIoU优化的边界框回归损失函数进行计算; 优化非极大值抑制,有效减少了目标框重叠的现象,提高检测精度; 针对运动目标检测,提出一种基于目标框多中心点位移的检测算法. 经UA-DETRAC数据集上的实验表明,改进后的算法在提高检测精度的同时保证了较快的速度,准确率和召回率相比原始YOLOv3分别提高了 8.07%和3.87%,对运动目标的检测速度可达20 fps/s,可满足实时检测的要求.