微通道中两相流压降与传质的研究

以氮气和水为实验体系,采用均质混合模型,研究微混合器的微通道中两相流通过微通道的压降,并测定了两相流的传质系数.结果表明,微通道当量直径为95.2 μm,气体速率为1.089～4.355 m/s,液体速率为0.006 41～0.170 90 m/s的条件下,均质混合模型计算压降值与实测值吻合良好.气速为1.633～3.484 m/s,液速为0.025 6 m/s时,随着气速增加,传质系数呈递增的趋势.气速为1.633～3.484 m/s,液速为0.019 2 m/s时,随着气速增加,传质系数先增加后降低然后再增加.传质系数对液速变化更为敏感.     

Bench-scale tests to determine mechanisms of charge generation due to particle-particle and particle-wall contact in binary systems of fine and coarse particles

Bench-scale methods were utilized to determine changes in electrostatic charges and their mechanisms for various coarse and fine particles as they came into contact with each other and/or their containing vessel walls. Techniques included shaking tests and particle-copper plate contacting experiments. Electrostatic behaviour of coarse particles (glass beads and polyethylene) and fine particles (Larostat 519, glass beads and silver-coated glass beads) were investigated. Shaking tests resulted in charge separation in which the fine particles acquired significant positive charges, opposite to those carried by the large particles. In copper-plate contacting tests, charge transfer occurred between the fines and the copper plate with fines carrying away almost all of the initial charges on the plate followed by further charge separation. Charge separation was found to be the dominant charging mechanism between the coarse particle and copper plate, with the particles becoming negatively charged.     

异形管内水力、传热性能的数值模拟

通过数值计算考察了横纹管、缩放管两种异形管内的流动与传热性能。计算时采用标准k-ε湍流模型：采用控制容积法对控制方程进行离散化；采用SIMPLE算法进行压力修正：代数方程采用超松弛法迭代求解。很出了在充分发展流时的传热努塞尔数、速度、瘴撩系数及湍动能分布，并与光滑管内的流动传热进行了比较，分析了异形管在强化传热方面的机理。计算结果和实验值比较吻合。     

催化精馏合成异丙苯过程催化剂装填结构研究

为考察不同催化剂装填结构对催化精馏合成异丙苯过程的影响 ,在热态反应器中进行苯烃化催化精馏合成异丙苯的研究。反应器直径为 3 0mm ,高 2 0 0 0mm ,所用催化剂为 β改性沸石分子筛。操作压力0 .7MPa ,温度 43 0— 480K ,苯质量空速 4— 6h- 1 ,苯烯摩尔比 1.1— 2 .2 ,回流比 9— 2 0。催化剂装填结构由不锈钢填料与催化剂颗粒组成 ,三种装填结构的空隙率分别为 85 .1% ,81.6%和 79.4%。结果表明 ,对于异丙苯合成体系 ,装填结构对催化精馏的总体效果起决定性影响。在催化剂装填总量不变的前提下 ,异丙苯的选择性与丙烯的转化率均随催化剂装填结构空隙率的提高而提高。在优化条件下 ,异丙苯的选择性达97% ,丙烯转化率接近 10 0 %。催化剂装填结构对异丙苯选择性的影响比对丙烯转化率的影响更显著     

Ce:Nd:ZnWO4激光晶体的生长及其光谱性能

采用提拉法生长出光学质量的Nd:ZnWO4,Ce:ZnWO4和Ce:Nd:ZnWO4晶体.通过X射线衍射仪对晶体样品的微观结构进行了分析.测试了晶体的吸收光谱、电感耦合等离子体原子发射光谱和荧光光谱.根据Judd-Ofelt理论计算出Nd:ZnWO4晶体中Nd3 的强度参数为:Ω2=6.820 2×10-20 cm2,Ω4=0.463 3×10-20 cm2,Ω6=0.443 5×10-20 cm2.研究了Ce3 和Nd3 之间的能量转移现象.结果表明:Nd3 在850 nm激发时产生上转换发射峰位于474 nm和572 nm处,分别对应于2G9/2,4K13/2到基态能级4I9/2跃迁,计算出该峰的自发辐射几率为1 360 s-1,荧光寿命为7.353×10-4 s,发射截面为0.905 9×10-23 cm2.     

Sequence and structure of VH domain from naturally occurring camel heavy chain immunoglobulins lacking light chains

We cloned 17 different PCR fragments encoding V_H genes of camel(Camelus dromedarius). These clones were derived from the camelheavy chain immunoglobulins lacking the light chain counterpartof normal immunoglobulins. Insight into the camel V_H sequencesand structure may help the development of single domain antibodies.The most remarkable difference in the camel V_H, consistent withthe absence of the V_L interaction, is the substitution of theconserved Leu45 by an Arg or Cys. Another noteworthy substitutionis the Leu11 to Ser. This amino acid normally interacts withthe C_H1 domain, a domain missing in the camel heavy chain immunoglobulins.The nature of these substitutions agrees with the increasedsolubility behavior of an isolated camel V_H domain. The V_H domainsof the camels are also characterized by a long CDR3, possiblycompensating for the absence of the V_L contacts with the antigen.The CDR3 lacks the salt bridge between Arg94 and Asp101. However,the frequent occurrence of additional Cys residues in both theCDR1 and CDR3 might lead to the formation of a second internaldisulfide bridge, thereby stabilizing the CDR structure as inthe DAW antibody. Within CDRs of the camel V_H domains we observea broad size distribution and a different amino acid patterncompared with the mouse or human V_H. Therefore the camel hypervariableregions might adopt structures which differ substantially fromthe known canonical structures, thereby increasing the repertoireof the camel antigen binding sites within a V_H.     

PP/PVC/PP-g-(St-co-MMA)的形态结构

以苯乙烯一甲基丙烯酸甲酯共聚物接枝聚丙烯[PP—g-（St—co—MMA）]为相容剂，利用扫描电子显微镜（SEM）和x射线能谱仪（EDS）对PP／PVC／PP—g-（St—co-MMA）的形态结构进行了研究。由x射线能谱微区分析得到了共混物中氯元素面分布图，对氯元素面分布进行了粒径统计。结果表明，在PP／PVC中加入PP-g-（St—co—MMA）相容剂，共混物亚微观相形态结构发生了变化。PP—g-（St—co—MMA）能够明显降低PP／PVC共混物中PVC分散相的分散尺寸，提高共混物两相之间的相容性。改变相容剂的用量和共混物的组成，都对体系的形态结构产生影响。     

我国轮胎产业的状况与展望

着重叙述了我国轮胎产业规模与结构,十大名牌企业代表我国轮胎业最好水平,国内企业形式是国有、国有控股、民营、台资、外资各种形式并存.提出我国企业应形成合理的经济规模,才能实现更大的效益增长.我国轮胎产量逐年提高,子午化率也提高较快.轮胎品质还有待提高,应增强自主开发能力.轮胎的进口价格远高于我国轮胎出口价格,指出只有不断创新,才能使我国成为轮胎出口强国.只要轮胎企业抓住机遇,未来的中国轮胎业将会有更广淘的发展空间.     

Analysis of the diffusion layer thickness, equivalent circuit and conductance behaviour for reversible electron transfer processes in linear sweep voltammetry

The parametric dependence of the diffusion layer thickness upon electrode potential and scan rate has been derived for reversible electron transfer processes in linear sweep voltammetry (LSV) using a simple analytical expression for the dimensionless current function. The quantitative variation of the conductance with potential and scan rate has been illustrated and the equivalent circuit pertaining to LSV has been proposed. Several earlier results pertaining to potential step experiments, thin layer voltammetry, surface bound LSV, radial flow at micro-ring electrodes, etc. are shown to arise from the general expression for the current function obtained here, thus indicating an isomorphism among various potential perturbation techniques.     

Side-Surface Structure of a Commercial β-Silicon Carbide Whisker

The side surfaces of a commercial β-SiC whisker were analyzed by calculating the surface energy and observing the microstructure of the whiskers. The results indicated that the side surfaces displayed a type of zigzag structure and were composed of {111}, {110}, and {100} crystal planes.