Influence of third monomer on the crystal phase transition behavior of ethylene-tetrafluoroethylene copolymer

Crystal phase transition between the low- and high-temperature phases has been investigated for ethylene (E)-tetrafluoroethylene (TFE) alternating copolymer (ETFE) containing the third monomeric species by the temperature dependent measurements of wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS) and differential scanning calorimetry. Nonafluoro-1-hexene (NFH) and hexafluoropropylene (HFP) were chosen as the third monomers, where they are different in the side-branch length, -(CF₂)₃CF₃ and -CF₃, respectively. In the case of E/TFE/NFH copolymer (ET-C4F9), the crystal phase transition temperature of the original ETFE two-components copolymer was not very much affected by the existence of NFH in the range of NFH content from 0.7 to 3 mol%. Contrarily, the crystal phase transition temperature of E/TFE/HFP copolymer (ET-CF3) was found to decrease drastically with increasing HFP content. The melting temperature and the higher-order structure were also affected sensitively depending on the HFP content. This difference in phase transition behavior between ET-C4F9 and ET-CF3 copolymers is reasonably interpreted as follows: the short side groups (-CF₃) of HFP monomeric unit are included in the crystal lattice of E/TFE chains and the unit cell is expanded gradually with an increment of the HFP content, resulting in the decrease in phase transition point because of easier thermal motion of the chains. On the other hand, the long side groups [-(CF₂)₃CF₃] of NFH monomeric units are excluded out of the crystal lattice and located on the lamellar surfaces or in the amorphous region and do not affect very much the phase transition temperature even when the NFH content is increased. In association with such a change in crystal structure, the long period of stacked lamellar structure was found to decrease remarkably in the case of NFH, whereas it does not change very much for HFP, consistent with the interpretation of the above-mentioned WAXD data.     

Functional copolymer of geraniol and acrylonitrile: Synthesis and characterization

The radical copolymerization of acyclic terpene namely geraniol [GER] with acrylonitrile [AN] in DMF at (70 ± 0.1)°C for 1 h, using benzoylperoxide (BPO) as an initiator has been carried out under inert atmosphere of nitrogen. The kinetic expression for reaction is R_p ∝ [BPO]^0.5 [AN]^1.0 [GER]^1.0. The IR spectrum of the copolymer shows bands at 3432 and at 2244 cm^?1 due to ? OH group of GER and ? CN group of AN, respectively. The ¹³C‐NMR spectrum shows peaks at 73–75 δ ppm and 116–120 δ ppm due to ? OH group of GER and ? CN group of AN, respectively. The thermogravimetric analysis and differential scanning calorimetry study shows that copolymer is thermally stable up to 407°C and has glass transition temperatures (T_g) 56°C. The reactivity ratios r₁ (AN) and r₂ (GER) have been calculated as 0.05 and 0.005, respectively. The Alfrey‐Price Q‐e parameter for GER has been calculated as 0.094 and ?2.0, respectively. The molecular weights of the copolymers have been evaluated by gel‐permeation chromatography. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Time and temperature effect on the linear–nonlinear viscoelastic transition threshold of a polymeric system

In the present study, the transition of a polymeric material from the linear to the nonlinear viscoelastic behavior and the determination of the nonlinearity stress threshold variation with time and temperature are investigated. For this purpose a systematic experimental program consisted of thermal and mechanical characterization of certain polymeric material followed by isothermal creep tests at different stress levels and temperatures was conducted. Through isochronal curves that occurred from creep tests, the nonlinearity threshold dependence on both time and temperature is presented. The reported results provide information that is critical for the design and development of polymer structures and components. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Influence of Drying Conditions on Ascorbic Acid during Convective Drying of Whole Persimmons

Degradation kinetics of food constituents may be related to the matrix molecular mobility by glass transition temperature. Our objective was to test this approach to describe ascorbic acid degradation during drying of persimmons in an automatically controlled tray dryer with temperatures (40 to 70°C) and air velocities (0.8 to 2.0 m/s) varying according a second order central composite design. The Williams-Landel-Ferry model was satisfactorily adjusted to degradation curves for both control strategies adopted—constant air temperature and temperature fixed inside the fruit. Degradation rates were higher at higher drying temperatures, independent of the necessary time to attain the desired moisture content.     

Sidechain liquid crystal polymers

Research has continued in the field sidechain liquid crystal polymers over recent years, but it is becoming clearer that this research is being directed away from the traditional technology areas of electro-optic devices and researchers are developing new and exciting applications for this novel state of matter.     

Dose and dose rate effects on coherent-to-incoherent transition of precipitates upon irradiation

A typical precipitation hardened alloy, Cu-Co dilute alloy was selected to study the precipitation behavior and irradiation effect on precipitates. It is found that the principal effect of ion irradiation on the coherent precipitates is loss of coherency, and TEM cross-section observations show that the fraction of the incoherent precipitates is dependent on dose but not on dose rate during heavy ion irradiation.     

Synthesis,characterization, and thermal properties of phosphorus‐containing,wholly aromatic thermotropic copolyesters

A series of phosphorus‐containing, wholly aromatic thermotropic copolyesters from acetylated 2‐(6‐oxide‐6H‐dibenz〈c,e〉〈1,2〉oxa phosphorin‐6‐yl)‐1,4‐dihydroxy phenylene, p‐acetoxybenzoic acid, terephthalic acid, and isophthalic acid were prepared by melting polycondensation. The structure and basic properties of the polymers, such as the glass‐transition temperature (T_g), melting temperature (T_m), thermal stability, crystallinity, and liquid crystallinity, were investigated with Fourier transform infrared, elemental analysis, differential scanning calorimetry (DSC), thermogravimetric analysis, wide‐angle X‐ray diffraction, and hot‐stage polarizing optical microscopy. The copolyesters had relatively high T_g values ranging from 183 to 192°C. The T_m values obtained from DSC curves for samples P‐20 and P‐25 were 290 and 287°C, respectively (where the number in the sample name indicates the molar fraction of the phosphorus‐containing monomer in the reactants). The initial flow temperatures of other samples observed with hot‐stage polarizing microscopy were 271–290°C. The 5% degradation temperatures in nitrogen ranged from 431 to 462°C, and the char yields at 640°C were 41–52%. All the copolyesters, except P‐40, were thermotropic and nematic. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1278–1284, 2002     

Influence of silicon on the growth of barrier-type anodic films on titanium

Amorphous anodic titania, stabilised by incorporation of silicon species, is shown to grow to high voltages on sputter-deposited, single-phase Ti-Si alloys during anodizing at a constant current density in ammonium pentaborate electrolyte. The films comprise two main layers, with silicon species confined to the inner layers. An amorphous-to-crystalline transition occurs at ∼60 V on the Ti-6 at.% Si alloy, while the transition is suppressed to voltages above 140 V on alloys with 12 and 26 at.% silicon. The crystalline oxide, nucleated at a depth of ∼40% of the film thickness, is associated with the presence of a precursor of crystalline oxide in the pre-existing air-formed oxide. The modified structure of the air-formed oxide due to increased incorporation of silicon species suppresses the amorphous-to-crystalline transition until the onset of dielectric breakdown. The transport numbers of cations and anions during growth of the anodic oxides are independent of the concentration of silicon species in the inner layer, despite the marked change in the field strength.     

Dynamic response of Ti3SiC2 under shock compression up to 112 GPa

Ti₃SiC₂ is of interest due to its unique dual nature reminiscent of both brittle ceramics and ductile metals at ambient conditions. In this work, plate-impact experiments have been performed to study the dynamic behavior of Ti₃SiC₂ under shock compression up to 112 GPa by using laser velocity interferometer and electric pin techniques. Hugoniot elastic limits (HEL), spall strength, and Hugoniot equations of state have been obtained based on measured particle velocity profiles and shock wave velocities. The ratio of spall strength to HEL for Ti₃SiC₂ is larger than brittle ceramics but smaller than metals. This result indicates that the dual nature of Ti₃SiC₂ remains at least up to 10 GPa. On the other hand, the linearity of the Hugoniot equation of state, $D=6.9\text{0}1(22)+1.153(53)u_{\text{p}}$, suggests that the initial structure of Ti₃SiC₂ should be stable up to 112 GPa, in contrast to the result reported by Jordan et al. [J. Appl. Phys., 93 (2003) 9639].     

M序列的对称性变换及对称群

n级M序列是由n级非线性回馈移位寄存器产生的周期为2n的二元序列,也称为de Bruijn序列。该文将讨论M序列的对称性变换,提出了一类新的对称性变换——"与/或"逻辑对称性变换,并研究了基于对称性变换的对称群。