压力管道设计中的防振措施

针对压力管道产生振动的原因 ,提出了一些减小和防止管道振动的措施 ,以便将管道振动控制在一定的范围内 ,使压力管道系统能得以安全运行。     

奥氏体不锈钢酸性气管线开裂失效检测分析

在用奥氏体不锈钢酸性气管道压力试验过程中泄漏,检查发现管道多处穿孔和开裂。系列手段分析后表明,开裂失效是在含有Cl~-物质和在潮湿的环境中,产生的点腐蚀、应力腐蚀和局部腐蚀疲劳开裂。     

煤制合成气低温甲醇洗配管总结

本文根据以煤为原料的合成氨工艺装置中低温甲醇洗涤净化系统的特点，对其配管在工程设计时的一些特殊要求进行总结，供工程设计人员参考。     

凝结水再循环管道振动原因及减振措施

对比了福建省内某电厂一期、二期工程600 MW发电机组凝结水再循环管道的设计和布置,经过分析,得出了一期管道振动的原因。在二期设计中做出了一些改进,基本解决了凝结水再循环管道的振动问题。     

工业管道测厚技术在化工厂的应用

本文较为详细地介绍了工业管道的规范化管理及其在化工厂的应用。指出管道定期定点测厚和计算机管理是工业管道规范化管理的重要内容。通过实施这一管理措施可以提高企业的经济效益和社会效益。     

关于含乘积纯正断面的正则半群

介绍了乘积纯正断面的概念和性质,给出乘积纯正断面的等价条件,并给出含有乘积纯正断面的正则半群的结构定理.     

从管道检测的角度,分析涂层失效的原因

本文首先阐明涂层对管道保护的重要作用，综述了目前长输管道涂层现状及常用涂层材料的特点，通过近几年来对数千公里管道的不同类型涂层检测、评价，总结出涂层失效的主要形式，从管道周围介质的腐蚀性、环境及涂层施工等方面，分析了外界条件与涂层失效的关系，以及导致涂层失效的主要原因。目前长输管道涂层失效的形式主要有：涂层的剥离、龟裂、破损及变形等。     

Analysis of failed nuclear plant components

Argonne National Laboratory has conducted analyses of failed components from nuclear power- gener-ating stations since 1974. The considerations involved in working with and analyzing radioactive compo-nents are reviewed here, and the decontamination of these components is discussed. Analyses of four failed components from nuclear plants are then described to illustrate the kinds of failures seen in serv-ice. The failures discussed are (1) intergranular stress- corrosion cracking of core spray injection piping in a boiling water reactor, (2) failure of canopy seal welds in adapter tube assemblies in the control rod drive head of a pressurized water reactor, (3) thermal fatigue of a recirculation pump shaft in a boiling water reactor, and (4) failure of pump seal wear rings by nickel leaching in a boiling water reactor. Work supported by Commonwealth Edison Company under ACK 85026.     

Wide passband/stopband bandpass filter based on transversal signal interference concepts and modified branch‐line structure

A high selectivity wide passband filter with a broader stopband based on transversal signal‐interaction concepts and modified branch line structure (MBLS) is developed in this article. Two transmission paths, that is, one half‐wavelength transmission line and one MBLS, are used to realize signal transmission from Port 1 to Port 2. Then, two transmission zeros are introduced at both lower and upper sides of the passband, which are used to improve the passband selectivity greatly. The filter bandwidth can be easily controlled by reasonable adjusting the coupling coefficient of the coupled lines. Furthermore, with four stubs connected at the input/output ports, the stopband attenuation level is improved greatly. Finally, one prototype filter having 69.1% of 3 dB fractional bandwidth is fabricated with advantages of sharp selectivity and high out‐of‐band rejection. The EM simulated and measured results are presented, and an excellent agreement can be obtained. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:330–336, 2015.     

石环水系某倒虹吸进口挡土墙基础管涌破坏成因与处理

针对石环水系某倒虹吸进口挡土墙基础发生的管涌破坏,介绍了管涌及现场检查情况,分析了管涌成因。根据工程具体情况,采取了封堵渗漏通道、墙后填土等应急处理措施及止水重造、基础灌浆等后续处理,收到良好效果,可供同类工程借鉴或参考。