新型潜油电泵防砂防垢吸入口的研究应用

针对中原油田矿化度高、出砂量大的开采现状,设计了潜油电泵防砂防垢吸入口,作为电动潜油泵提液系统的辅助设备,对井液先通过滤网防砂管工艺装置进行砂粒过滤,同时通过高强磁防垢器进行磁化处理,使矿化物分子结构改变,结垢缓解。解决了多砂和矿物质结垢而造成的泵卡及泵结垢等技术难题,现场应用效果良好。     

油井封堵注水泥一次不留管柱堵水工具

吉林油田开发到中后期,油井出水现象日趋复杂,以往的注水泥堵水技术均不能满足现状的要求。鉴于此,研制出油井封堵注水泥一次不留管柱堵水工具,并形成了水泥堵水新工艺。该工具的核心为封堵注水泥装置,由打压坐封总成、胶塞座丢手总成、注水泥器本体总成和单流定压器总成等4部分组成,具有打压坐封、注水泥、投胶塞和丢手等一次性功能。经过现场6口井的施工,无一口井发生卡井事故,施工有效率100%,成功率100%。     

Conventional Electron Microscopy and Electron Holography of Organic Solar Cells

Organic solar cells are a promising route towards large‐area and low‐price photovoltaic systems. The devices are composed of at least two layers: the hole‐transport layer and the electron‐transport layer. The light absorption can occur in one or both layers. At the interface of the layers the excitons are separated into charge carriers, and every layer deals with one type of carrier. Higher efficiencies of the separation process can be obtained by using a mixed layer containing both materials to obtain a very high interface area. Although the structure of the mixed layers used plays a crucial role for the device performance, until now the morphologies have not been elucidated. In order to correlate physical and optical findings with structure and morphology for the materials in question, electron microscopy experiments were performed on the single components as well as on the layer systems. The conventional electron microscope is a poor phase microscope. As consequence, weak‐phase objects like organic molecules have to be stained or imaged under strong defocus to produce an observable contrast. Artifacts caused by chemical staining and the appearance of Fresnel diffraction using the defocus technique represent the main problems of conventional microscopy. These artifacts can be avoided using electron holography. Holograms of ultrathin sections of thin layers composed of organic dye molecules were recorded. Subsequently, the phase images were reconstructed. In this manner, we succeeded in obtaining high‐contrast electron micrographs without applying staining or defocus. In addition, holograms of crystalline C₆₀ and zinc phthalocyanine were successfully recorded. Holography has been shown to be a useful tool to image beam‐sensitive and weak‐phase objects without artifacts.     

Pyrolysis of Miscanthus Giganteus and wood pellets: TG-FTIR analysis and reaction kinetics

Characterisation of two biomass fuels (pelletised Miscanthus Giganteus and wood) was performed using thermogravimetric analysis with measurement of products by means of Fourier transform infrared spectroscopy (TG-FTIR). Three heating rate profiles were applied (10, 30 and 100 °C/min), with a final temperature of 900 °C. HCN and HNCO were found to be the major N-products, while the NH₃ fraction was detected to a minor extent. Kinetic parameters were obtained from the TG-FTIR results using a model based on parallel first-order reactions with a Gaussian distribution of activation energies. On the basis of the above kinetic analysis and product yields, input files for the functional group-devolatilisation, vaporisation, cross-linking biomass-pyrolysis model were prepared. The fit of model parameters to TG-FTIR product-evolution data was found to be generally good, but the model-predicted yields for some species did not fit experimental data at all heating rates. Further improvements in the model are needed to resolve above difficulty.     

Tuning the Dimensions of C60‐Based Needlelike Crystals in Blended Thin Films

A new ordered structure of the C₆₀ derivative PCBM ([6‐6]‐phenyl C₆₁‐butyric acid methyl ester) is obtained in thin films based on the blend PCBM:regioregular P3HT (poly(3‐hexylthiophene)). Rapid formation of needlelike crystalline PCBM structures of a few micrometers up to 100 μm in size is demonstrated by submitting the blended thin films to an appropriate thermal treatment. These structures can grow out to a 2D network of PCBM needles and, in specific cases, to spectacular PCBM fans. Key parameters to tune the dimensions and spatial distribution of the PCBM needles are blend ratio and annealing conditions. The as‐obtained blended films and crystals are probed using atomic force microscopy, transmission electron microscopy, selected area electron diffraction, optical microscopy, and confocal fluorescence microscopy. Based on the analytical results, the growth mechanism of the PCBM structures within the film is described in terms of diffusion of PCBM towards the PCBM crystals, leaving highly crystalline P3HT behind in the surrounding matrix.     

Enhanced Photoelectrochemistry in CdS/Au Nanoparticle Bilayers

Three different configurations of Au‐nanoparticle/CdS‐nanoparticle arrays are organized on Au/quartz electrodes for enhanced photocurrent generation. In one configuration, Au‐nanoparticles are covalently linked to the electrode and the CdS‐nanoparticles are covalently linked to the bare Au‐nanoparticle assembly. The resulting photocurrent, φ = 7.5 %, is ca. 9‐fold higher than the photocurrent originating from a CdS‐nanoparticle layer that lacks the Au‐nanoparticles, φ = 0.8 %. The enhanced photocurrent in the Au/CdS nanoparticle array is attributed to effective charge separation of the electron–hole pair by the injection of conduction‐band electrons from the CdS‐ to the Au‐nanoparticles. Two other configurations involving electrostatically stabilized bipyridinium‐crosslinked Au/CdS or CdS/Au nanoparticle arrays were assembled on the Au/quartz crystal. The photocurrent quantum yields in the two systems are φ = 10 % and φ = 5 %, respectively. The photocurrents in control systems that include electrostatically bridged Au/CdS or CdS/Au nanoparticles by oligocationic units that lack electron‐acceptor units are substantially lower than the values observed in the analogous bipyridinium‐bridged systems. The enhanced photocurrents in the bipyridinium‐crosslinked systems is attributed to the stepwise electron transfer of conduction‐band electrons to the Au‐nanoparticles by the bipyridinium relay bridge, a process that stabilizes the electron–hole pair against recombination and leads to effective charge separation.     

变形介质中宾汉稠油驱替特征

通过建立变形介质中考虑启动压力梯度的一维两相宾汉稠油驱替的数学模型,并进行了数值求解,分析了地层变形以及启动压力梯度对水驱稠油的影响,分析表明:介质变形对含水饱和度的分布没有影响,而对地层压力的影响是非常显著的,随着变形介质弹性的增加,地层压力越来越低,并且越靠近注入端,地层压力下降越快;原油的启动压力梯度同时影响含水饱和度和地层压力的分布,在其它条件一定时,启动压力梯度的存在,造成地层压力的增加和平均含水饱和度的降低。在油田开发实际中,应考虑地层变形和启动压力梯度的影响,以提高原油采收率。     

洼60-H26水平井套铣打捞技术

洼60-H26井是一口中曲率水平井,设计井深1 922 m,由于地面条件的限制,设计采用三维井眼轨道。该井水平段在钻至井深1 801 m时,发生卡钻事故。在卡钻事故处理过程中,采用测卡、爆炸松扣技术取出上部钻具后,应用了不同规格的套铣管对被卡钻具进行套铣,采用间歇式套铣方式实现了大斜度井段(45°-90°)的安全套铣,采用短套铣管完成了时水平井段内φ215．0 mm稳定器的套铣,采用φ228．6 mm套铣管成功套铣水平井段被卡LWD仪器,最后通过震击器震击成功解卡。详细介绍了洼60-H26水平井卡钻事故的处理过程,分析了在水平段处理卡钻事故的难点。该井处理卡钻事故的经验,对以后水平井施工中处理井下事故、打捞贵重仪器具有借鉴价值。     

可拓知识空间和可拓知识网格模型(Ⅱ):可拓知识网格

第1部分中已介绍了可拓知识空间定义和相关操作，以及可拓知识空间关联函数计算方法。这一部分进一步建立可拓知识空间语义网、可拓知识网格和可拓知识网格服务，并给出实例和相关的分析讨论。