Adhesives in construction: A contractor's viewpoint

The development of epoxy- and polyester-based adhesives has dramatically widened the scope of adhesive bonding in the civil engineering industry but the technology of the adhesives used has often been more appropriate to the workshop than to the construction site. There is a need for the suppliers of structural adhesives to recognize this and to develop compositions and application techniques more amenable to site use. It is equally necessary for the construction industry to make more effort to understand these materials, to take advantage of their outstanding properties, and hence to use them successfully for the construction and repair of concrete structures.     

Relationships Between the Crystal Structures and the Multiple Melting Behaviors of Poly(ethylene 2,6‐naphthalate)

Summary: Poly(ethylene 2,6‐naphthalate) (PEN) can crystallize either from the glassy state or from the melt state. When crystallized from the glassy state, the sample was quenched from the melt in liquid nitrogen and then annealed at certain crystallization temperatures. When crystallized from the melt state, the sample was cooled to a preset temperature from the melt and then annealed for a certain time. The crystal modifications, morphologies and melting behaviors of PEN were investigated by means of wide‐angle X‐ray diffraction (WAXD), polarized optical microscopy (POM), small‐angle light scattering (SALS) and differential scanning calorimetry (DSC). The results show that an α crystal modification of PEN was obtained when PEN crystallized from the glassy state, whilst a β crystal modification was obtained when PEN crystallized from the melt state at a higher temperature. An hedritic morphology of PEN crystal was obtained with only one melting peak observed in DSC curves when PEN was crystallized at a higher temperature from either the glassy state or the melt state. The α crystal modification could also be obtained when PEN was crystallized at a lower temperature from the melt. Spherulitic or banded spherulitic morphologies of PEN crystals, exhibiting multiple melting peaks in DSC curves, were observed when PEN was crystallized at a lower temperature. The multiple melting behaviors of PEN crystals may be associated with spherulitic structures composed of lamellae of varying thickness.

WAXD patterns of PEN isothermally crystallized from different states.     

复合材料弹道冲击性能研究进展

本文总结了近年来复合材料弹道冲击研究的进展,着重从纤维集合体的结构对弹道冲击损伤机理的影响、弹道冲击的分析模型及数值模拟做了概述,总结了人们为提高复合材料弹道冲击性能所做的努力,最后指出了几个尚需深入解决的问题.     

Isothermal crystallization kinetics and morphology development of isotactic polypropylene blends with atactic polypropylene

The crystallization kinetics and morphology development of pure isotactic polypropylene (iPP) homopolymer and iPP blended with atactic polypropylene (aPP) at different aPP contents and the isothermal crystallization temperatures were studied with differential scanning calorimetry, wide‐angle X‐ray diffraction, and polarized optical microscopy. The spherulitic morphologies of pure iPP and larger amounts of aPP for iPP blends showed the negative spherulite, whereas that of smaller amounts of aPP for the iPP blends showed a combination of positive and negative spherulites. This indicated that the morphology transition of the spherulite may have been due to changes the crystal forms of iPP in the iPP blends during crystallization. Therefore, with smaller amounts of aPP, the spherulitic density and overall crystallinity of the iPP blends increased with increasing aPP and presented a lower degree of perfection of the γ form coexisting with the α form of iPP during crystallization. However, with larger amounts of aPP, the spherulitic density and overall crystallinity of the iPP blends decreased and reduced the γ‐form crystals with increasing aPP. These results indicate that the aPP molecules hindered the nucleation rate and promoted the molecular motion and growth rate of iPP with smaller amounts of aPP and hindered both the nucleation rate and growth rate of iPP with larger amounts of aPP during isothermal crystallization. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1093–1104, 2007     

大型地下变电站GIS现场绝缘试验方法

针对大型地下变电站空间相对狭窄的特点,提出交流耐压试验配合灵敏局放测量的地下变电站GIS现场绝缘试验方案,其中GIS耐压试验采用SF6气体绝缘的试验电抗器实现.试验表明,该方案可行性强、有效性高,适合在大型地下变电站中现场推广应用.     

砌体结构墙体裂缝的成因及防治措施

分析了砌体结构墙体裂缝的类型及成因,结合我国当前砌体结构在民用建筑中的使用情况,阐明了《砌体结构设计规范》防止或减轻墙体开裂的主要措施,从预防和治理两方面提出相应的具体建议,为房屋建筑设计、施工及使用管理提供参考.     

弹性介质中框架结构的有限元计算分析(英文)

文章提出了一种考虑剪切变形,由经典弯杆理论发展形成的在弹性介质中框架结构的有限元计算方法.     

Application of open-pit and underground mining technology for residual coal of end slopes

Given the conditions of residual coal from the boundary of a flat dipping open-pit mine,which uses strip areas mining and inner dumping with slope-covering,we propose an open-pit and underground integrated mining technology for residual coal of end slopes.In the proposal a conveyance road and ventilation conveyance near the slope are built,corresponding to the pit mining area and the surface coal mine dump,as well as an interval haulage tunnel and air-inlet tunnel.The outcome shows that such mining method may reduce the effect to slope stability from underground mining,it does not affect the dumping advance and has a high recovery rate of residual coal resources.The working face is timbered by single hydraulic props,transported by a scraper conveyor and supported by coal walls.This method of mining is one of layered top coal caving,with high resource recovery,low production cost where positive economic benefit can be realized.     

中国南方岩溶区岩溶地下河系统复杂水流运动特征

岩溶地下河系统水流运动多受控于岩溶多重介质环境,其主干空间展布、水体贮存、水流运动、水循环等规律的变化具多因多果性。在中国南方岩溶区岩溶地下河系统物质和能量转换的基础上,分析了其形成和演化等相关条件,研究和总结了其水流运动方向的多重性、速度的多变性、地表地下方式的转化性、时空配置的多样性及水流运动演变规律;根据维数、压力、流态等不同原则,将中国南方岩溶地下河系统水流运动方式进行分类。结合中国南方岩溶地下河系统研究现状,提出今后需加强与实践的重点。     

体内张拉成形空间网格结构的形态分析——几何位移迭代法

针对体内张拉成形空间网格结构实际发展需要,从工程应用的角度定义了该类结构的3种受力状态:零状态、初始态和荷载态.在此基础上提出了一种形态分析方法——几何位移迭代法,并以一个80m跨的体内张拉成形空间网格结构为例,对其找形过程特点做了细致分析.结果表明,几何位移迭代法找形精度高、速度快,非常适合于体内张拉成形空间网格结构形态研究,而且可以保持结构的完整性.