华北中部平原地表水入渗试验 ——以南宫溹泸河为例

华北平原中部地区含水砂层颗粒细且薄,对地下水储蓄和地表水入渗不利。选择河道带进行地表水入渗试验,以获取最大地下储蓄空间,为该区水资源合理利用提供良策。试验区选在南宫溹泸河,人工引水1.5个月,获取大量监测数据,据此对地下水位和水量的变化特征、入渗量和地下水库调蓄能力进行研究,结果表明：干涸河道引水入渗,入渗比例可达80.54%;溹泸河上下游2个断面Ⅰ-Ⅰ′和Ⅱ-Ⅱ′河道垂向渗透速度为10.81 m/d和10.72 m/d;水平扩散速度为1.69 m/h和2.38 m/h。由于Ⅰ-Ⅰ′断面垂向渗透速度大于Ⅱ-Ⅱ′断面,而水平扩散速度小于Ⅱ-Ⅱ′断面,所以Ⅰ-Ⅰ′断面形成的水丘相比Ⅱ-Ⅱ′断面较为明显,且不易消散。计算结果显示,试验区调蓄库容为1.87亿m3。     

Active symbols and internal models: Towards a cognitive connectionism

In the first section of the article, we examine some recent criticisms of the connectionist enterprise: first, that connectionist models are fundamentally behaviorist in nature (and, therefore, non-cognitive), and second that connectionist models are fundamentally associationist in nature (and, therefore, cognitively weak). We argue that, for a limited class of connectionist models (feed-forward, pattern-associator models), the first criticism is unavoidable. With respect to the second criticism, we propose that connectionist modelsare fundamentally associationist but that this is appropriate for building models of human cognition. However, we do accept the point that there are cognitive capacities for which any purely associative model cannot provide a satisfactory account. The implication that we draw from is this is not that associationist models and mechanisms should be scrapped, but rather that they should be enhanced.In the next section of the article, we identify a set of connectionist approaches which are characterized by active symbols — recurrent circuits which are the basis of knowledge representation. We claim that such approaches avoid criticisms of behaviorism and are, in principle, capable of supporting full cognition. In the final section of the article, we speculate at some length about what we believe would be the characteristics of a fully realized active symbol system. This includes both potential problems and possible solutions (for example, mechanisms needed to control activity in a complex recurrent network) as well as the promise of such systems (in particular, the emergence of knowledge structures which would constitute genuine internal models).     

Corrosion behaviour of Ni-Zr-Ti-Si-Sn amorphous plasma spray coating

Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ amorphous material was deposited by a vacuum plasma spraying technique onto steel and copper substrates in order to investigate their behaviour in a corrosive environment. For comparison, the same alloy was prepared as amorphous ribbons by melt spinning. The amorphous nature of the coatings and ribbons was characterized by XRD, DSC and TEM, while XPS and AES analyses were performed to understand the origin of passivation and mode of corrosion. The corrosion behaviour of the coating was studied in H₂SO₄ and HCl solutions open to air at room temperature. Potentiodynamic polarisation and galvanic coupling tests were carried out on the substrate and the coating. It was found that the formation of Zr-, Ti- and Si-rich passive oxide layers provide a high corrosion resistance in H₂SO₄ solution while the breakdown of the passive layer by chloride ion adsorption was responsible for pitting corrosion of the Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ amorphous ribbons in HCl solution. Galvanic corrosion was the dominant corrosion mechanism for the coating/copper hybrid structure, in contrast to the Ni₅₉Zr₂₀Ti₁₆Si₂Sn₃ amorphous coating, which efficiently protected the steel substrate in the corrosive environment.     

面向工业平稳/非平稳复杂系统的在线故障监测技术

针对复杂系统中关键性能指标（KPI）相关故障检测方法检测精度低的问题,提出基于双层改进潜结构投影（DL-IPLS）的KPI相关故障检测方法. 利用协整分析和主元分析建立底层模型,对非平稳和平稳变量进行特征提取. 将提取的信息进行融合,建立改进潜结构投影的上层模型,根据融合信息对KPI的贡献进行空间分解. 在2个正交子空间中设计统计量,实现KPI相关故障的在线监测. 田纳西-伊斯曼过程和青霉素发酵过程的仿真结果表明,在面向工业平稳和非平稳复杂工业系统检测时,所提方法有效提高了KPI相关故障的检测率,降低了KPI无关故障的误报率.     

Excellent Polyimide Dielectrics Containing Conjugated ACAT for High-Temperature Polymer Film Capacitor

In order to meet the requirements of polymer dielectric materials for high thermal stability and excellent dielectric properties in the application of high-temperature film capacitors, a series of polyimide (PI) films are fabricated by introducing a self-synthesized aniline trimer (ACAT) with a conjugated structure in this work. Since the conjugated ACAT in the main chains of PI improves the electron polarization and carrier mobility of the PI molecular chains, the dielectric constant of the ACAT-PI films is greatly enhanced (4.4–7.4). Meanwhile, the dissipation factor does not increase apparently (0.002–0.013). The dielectric properties are stable even when the temperature is up to 200 °C, the thermal degradation temperature is as high as 450 °C, and the mechanical properties are also excellent (70–105 MPa). Among all the films, the PI film with 5 mol% ACAT exhibits the maximal energy density of 3.6 J cm⁻³ under the field of 426 kV mm⁻¹, the high tensile strength (90 MPa) and the excellent thermal stability (T_d5 = 515 °C). The work paves the way to prepare high-temperature polymer dielectric film materials with high energy storage density.     

地下金属矿山斜坡道浆土路修筑工艺及应用研究

斜坡道是地下金属矿山的主要运输通道,其道路质量直接影响着矿山的安全运输和经济效益。针对斜坡道混凝土浇筑路面存在的筑路成本高、养护时间长、使用寿命短及维护困难等不足,引入浆土路修筑技术,开展了地下金属矿山斜坡道浆土路筑路材料配比试验、黏土搓条和崩解试验、水洗筛分试验,并在云南卡房分公司完成了浆土路试验路段的修筑。结果表明：浆土路筑路技术能够很好地应用于地下矿山道路修筑,具有施工工艺简单、筑路成本低、施工周期短、承载能力强、抑尘防滑和低碳环保等诸多优点,为地下金属矿山道路修筑提供了工程借鉴,对于矿山降本增效、节能减排及安全高效具有重要的意义。     

Fe3Al氢脆机理的研究

用余氏理论计算了氢对Ｆｅ３Ａｌ金属间化合物键结构、键能和电子分布的影响，分析发现，Ｆｅ３Ａｌ的氢脆是由于氢原子溶入扣引起Ｆｅ，Ａｌ原子状态变化。使晶体内晶格电子数大大减少，导致晶体局域金属性减弱，并构成具有严重各向异性的键络的结果。同时得出，氢在Ｆｅ３Ａｌ中占据间隙位置。     

地下环境中电子设备的腐蚀与防护

程环境中电子设备所承受的湿度、温度、腐蚀性气体、空气沉积物、微生物等环境应力因素及其腐蚀效应，概述总结了电子设备腐蚀机制及主要类型，并提出电子设备设计与使用中抑制腐蚀的措施.     

Simulation studies on the fuel electrode of a H2---O2 polymer electrolyte fuel cell

The macro-homogeneous porous electrode theory is used to develop a model which describes the catalyst layer of the hydrogen electrode formed by catalyst particles that are bonded to the membrane. The water transport in the catalyst layer and polymer electrolyte membrane is considered. The effects of catalyst layer structure parameters such as polymer volume fraction, catalyst layer thickness, platinum loading and reactant gas humidity as well as CO poison on the hydrogen electrode behavior are examined. The results show that the catalyst layer thickness has a significant effect on the electrode performance. A thicker catalyst layer will result in a larger ohmic voltage loss and higher catalyst cost. The optimal polymer volume fraction and catalyst layer thickness are 0.5 and 1.5–4 μm, respectively, for this electrode. An optimal platinum surface coverage on carbon need not exceed 20% (20 wt% Pt/C). Larger platinum coverage will increase the cost, but only slightly enhance the electrode performance.