Electrooptic studies on polymer‐dispersed liquid‐crystal composite films. III. Poly(methyl methacrylate‐co‐butyl acrylate)/E7 and poly(methyl methacrylate‐co‐butyl acrylate)/E8 composites

Composite films composed of poly(methyl methacrylate‐co‐butyl acrylate) (PMMABA) and nematic‐type liquid crystals E7 and E8 (commercial products from E. Merck, Darmstadt, Germany) were prepared through solvent casting in chloroform. The morphology and electrooptic responses were studied. Scanning electron microscopy observations showed that the liquid‐crystal phase (E7 or E8), as larger, elongated, interconnected cavities, was continuously embedded in a spongelike PMMABA matrix. At a specific level of the liquid‐crystal (E7 or E8) loading (30/70 wt %), the effects of the voltage, temperature, and frequency of an applied alternating‐current electric field on the transmittance of the composite films were measured with a He–Ne laser (wavelength = 632.8 nm). The results were interpreted in terms of the aggregation structure, interfacial interaction, and solubility of the liquid crystal in the matrix polymer. The results indicated that, under these experimental conditions, the output could be controlled to a desired level by the selection of suitable liquid crystals to prepare polymer‐dispersed liquid‐crystal, electrooptic, active composite films with a response time of the order of only milliseconds or less. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Application of ultrasonic waves in activation of microcrystalline cellulose

In this work, microcrystalline cellulose (MCC) was activated with ultrasonic waves. The influences of ultrasonic treatment on the changes of supramolecular structures and morphology structure were studied by WAXS and SEM. The accessibility of the MCC was characterized by water retention value (WRV) and specific surficial area. The influence of ultrasonic treatment on the reactivity of MCC was investigated through the reaction of MCC being oxidized into 2,3‐diadehyde cellulose (DAC) by periodate sodium. The mechanism of the reactivity change of ultrasonically treated MCC was examined. The results showed that the degree of crystallinity of MCC decreased and the degree of polymerization showed little change after treatment with ultrasonic waves. The morphologial variation of the treated MCC was significant when compared with the untreated MCC, which contribute to the improvement of accessibility. The aldehyde content of DAC prepared from ultrasonically treated MCC was improved from 64.19 to 85.00%, indicating that the regioselective oxidation reactivity of MCC was significantly improved. The aldehyde content was found to first increase with time of ultrasonic treatment to a point, and then decrease as time progressed. In addition, the aldehyde content was found to increase with an increase in ultrasonic power. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polymer transcrystallinity induced by carbon nanotubes

In this work, we provide the evidence of polymer transcrystallinity in the presence of carbon nanotubes (CNTs). The interfacial morphology of carbon nanotube fiber-polypropylene matrix is investigated by means of polarized optical microscopy (POM), wide-angle X-ray diffraction (WAXD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The supramolecular microstructures of polypropylene transcrystals induced by the nanotube fiber are observed in the range of isothermal crystallization temperatures from 118 °C to 132 °C. The dynamic process of transcrystallization is analyzed by using the theory of heterogeneous nucleation. Microstructure analysis shows that the nanotubes can nucleate the growth of both α- and γ-transcrystal, and α-transcrystals dominate the overall interfacial morphology. Close to the nanotube fiber surface, a cross-hatched lamellar microstructure composed of mother lamellae and daughter lamellae is observed.     

Comparative Study of Models on Confinement of Concrete Cylinders with Fiber-Reinforced Polymer Composites

The use of fiber-reinforced polymer (FRP) composites for strengthening and/or rehabilitation of concrete structures is gaining increasing popularity in the civil engineering community. One of the most attractive applications of FRP materials is their use as confining devices for concrete columns, which may result in remarkable increases of strength and ductility as indicated by numerous published experimental results. Despite a large research effort, a proper analytical tool to predict the behavior of FRP-confined concrete has not yet been established. Most of the available models are empirical in nature and have been calibrated against their own sets of experimental data. On the other hand, the experimental results available in the literature encompass a wide range of values of the significant variables. The objective of this work is a systematic assessment of the performance of the existing models on confinement of concrete columns with FRP materials. The study is conducted in the following steps: the experimental data on confinement of concrete cylinders with FRP available in the technical literature are classified according to the values of the significant variables; the existing empirical and analytical models are reviewed, pointing out their distinct features; the whole set of available experimental results is compared with the whole set of analytical models; and strengths and weaknesses of the various models are analyzed. Finally, a new equation is proposed to evaluate the axial strain at peak stress of FRP-confined concrete cylinders.     

用层次分析法优选喇萨杏油田三次加密调整区块

以检查井分析资料和二次加密调整井测试资料为基础，以大庆喇萨杏油田已开展的三次加密调整试验和已完成的三次加密调整方案为依据，通过对喇萨杏油田高含水后期各开发区块可调砂岩厚度、单储系数、综合含水、二次加密调整时间及套损井比例等几个主要指标综合分析的基础上，利用层次分析方法对喇萨杏油田各开发区块三次加密调整的可行性进行优选排队，最终给出喇萨杏油田三次加密调整优先进行的区块，为喇萨杏油田有计划、分步骤地实施三次加密调整提供了可靠依据。     

非标准防水构造设计探讨

在地下工程设计中，有时因具体工程的客观条件限制，或建筑、结构、设备、材料等诸多因素，必须采用一些非标准、特殊的防水构造设计。详细介绍了地下墙接缝防水构造等多种非标准防水构造设计。     

State of Practice for Positive Moment Connections in Prestressed Concrete Girders Made Continuous

Precast bridges are often constructed as single span for dead load, but continuous for live load. A diaphragm connection is provided for negative moment continuity. However, the connection may also be subjected to positive moments due to time-dependent effects. Because these moments may be large enough to damage the diaphragm or even the girders, a positive moment connection is often provided. This paper reports on a study to determine the types of positive moment connections used across the country and to identify potential problems with these types of connections. A questionnaire survey was conducted to assess the state of practice for precast prestressed concrete bridges made continuous. The survey provides valuable information on this type of bridge and updates a previous survey on this subject.     

Hierarchically Ordered Polymer Films by Templated Organization of Aqueous Droplets

Hierarchically ordered structures facilitate the incorporation of diverse functions simultaneously. The present report introduces a simple and novel strategy for producing hierarchically ordered polymeric films. Hierarchical ordering of aqueous droplets on a polymer solution is realized by the imposition of physical confinement via various shaped gratings. After drying of the solution, well‐ordered hierarchical structures were fabricated in the remaining polymer film. The size of the grating structure and the lattice size of spontaneous hexagonally packed aqueous pores comprise two different length scales, thereby offering multiscale ordering. Interfacial wetting of the polymer solution to the grating surface was crucial in terms of obtaining a highly ordered structure that can be tuned by dissolving a small amount of surfactant in the polymer solution. The present novel approach provides a new opportunity for lithography‐free fabrication of complex hierarchical structures.     

Shapes of Submerged Funicular Arches

In this paper, the analytical forms of the shapes of submerged funicular arches are expressed in terms of elliptic integrals. The initial radius of curvature at the apex is related to the water depth at the apex and the axial compressive force. The shape of the submerged funicular arches depends on the ratio between this initial radius of curvature and the water depth at the apex. Using the analytical expressions, the maximum span and height of the submerged funicular arches can be determined explicitly. Besides, the analytical expressions are useful in determining the design parameters for the submerged funicular arches accurately.