城市水系统关联模型研究

为了理清城市水系统中多因素间的复杂关系,对系统解决城市水问题提供帮助,基于水系统理论与城市水系统模拟相关研究,提出了城市水系统中水-经济社会-生态环境各因素之间相互作用和反馈的关联模型理论框架,建立了城市水系统演变过程中由针对经济发展的正反馈回路和针对可持续性的负反馈回路共同控制的新模式,构建了模拟城市水-经济社会-生态环境内在联系的城市水系统关联模型。以武汉市为例,应用建立的城市水系统关联模型,采用2001—2017年的历史统计数据,建立了武汉市城市水-经济社会-生态环境各要素之间互馈作用的模拟模型,预测了武汉市的城市发展轨迹,并与武汉市2030年的远期规划进行比较,验证了模型的有效性,表明城市水系统模型能够揭示城市水-经济社会-生态环境多要素的耦合驱动机制,体现了节水技术与绿色发展相关政策两大因子导向下的生态环境、经济社会协同发展的良好预期。     

Land‐use dynamic discovery based on heterogeneous mobility sources

Nowadays, cities are the most relevant type of human settlement and their population has been endlessly growing for decades. At the same time, we are witnessing an explosion of digital data that capture many different aspects and details of city life. This allows detecting human mobility patterns in urban areas with more detail than ever before. In this context, based on the fusion of mobility data from different and heterogeneous sources, such as public transport, transport‐network connectivity and Online Social Networks, this study puts forward a novel approach to uncover the actual land use of a city. Unlike previous solutions, our work avoids a time‐invariant approach and it considers the temporal factor based on the assumption that urban areas are not used by citizens all the time in the same manner. We have tested our solution in two different cities showing high accuracy rates.     

Screening model for assessing ‘cost’ of minimum flow requirements in the Svartå River,Sweden

The minimum flow requirements in the Svartå River in Sweden are directed at maintaining fishlife and providing suitable dilution for waste flows. The implications of varying the minimum flow requirements in the river are examined using a mixed integer optimisation model. The model is formulated as a modified method-of-weights technique with the economic issues of hydro-electricity generation, irrigation and urban water supply placed in the objective function and the minimum flows specified within the constraint set. The integer component of the model is required to model the operating policy at the major flow regulation facility in the system and the restricted validity of the irrigation permits. Application of the model shows that in dry years where competition between minimum flow levels and the other economic uses, is most intense, the levels achieved by the various economic objectives are only slightly reduced even with significant increases in the minimum flow requirements. Variations in minimum flow requirements of up to 45% only produce changes of 10% or less in the economic objectives. The lack of sensitivity of the objective levels is due primarily to the level of control exerted indirectly on the whole system in dry years by the release regulation policy and the restricted validity of the irrigation permits. In normal to wet years these policies are not as restrictive and more choice is available. In such years, however, there is generally sufficient water to satisfy all requirements and allocation is not a critical issue. The model itself is formulated generally so that a range of scenarios beyond those examined specifically in the paper can be considered.     

Poly(oxyphosphazenes): A unifying look at structure and morphology

Variations in thermotropic behavior have been investigated for many crystalline polyphosphazenes. Experimental results obtained from DSC, solid-state MAS NMR, dilatometry, mechanical property (creep and dynamic) measurements, birefringence, X-ray (wide and small-angle), and electron diffraction have been made as a function of temperature in an attempt to elucidate the structure-morphology behavior in these polymers. Initially all polyphosphazenes described in this study crystallize from dilute or moderately concentrated solutions in the monoclinic form with relatively low crystallinity (50%). When heated, these specimens expand atT(1) and adopt a chain-extended 2D mesophase morphology in order to relieve congestion. Above this first-orderT(1) temperature a chain-extended –P=N– chain backbone morphology transforms into an isotropic phase at the melting temperatureT _m. When cooled, samples transform into the mesostate. However, crystallization from the mesophase belowT(1) takes place into a 3D orthorhombic state. These two modes of ordering/disordering are in accordance with (i) a hexatic chain packing [betweenT(1) andT _m] with variously mobile side groups that also exhibits smectic features when mesogenic side groups are present and (ii) a 3D orthorhombic structure of high crystallinity belowT(1). The initial monoclinic phase is accessible only via a solution crystallization route. Solid-state MAS NMR, crystallization kinetic measurements, and optical microscopy studies obtained from oriented and unoriented polymers have been especially germane in providing a unifying picture for mesophase formation and ordering in polyoxyphosphazenes. X-ray and electron diffraction evidence is complicated by critical overlapping peaks that are found under these same conditions. They demonstrate that (a) positional disorder exists along the chain direction and (b) the side chain above, as well as below, theT(1) transition is governed by the mobility, size, and type of side group in circumstances where phase transformations occur.     

改进的形态学运算在声纳图像生成中的应用

声纳技术应用日益广泛,已成为海洋测量的重要工具,而去除噪声处理是对声纳图像进行正确判读的前提,本文采用了改进的形态学算法减少声纳图像中噪声的影响,对图像进行预处理,采用Matlab图形图像处理工具对处理的算法进行仿真的方式,从而使处理效果达到最佳。     

Formation of WC/Ni hard alloy coating by laser cladding of W/C/Ni pure element powder blend

WC/Ni coating was formed by laser cladding of a W/C/Ni powder blend. The formed WC crystals have rectangular or quadrangle cross-section shapes with size of 2–30 μm. Step, twist and cross growth morphologies of WC formation were observed. The coating contains WC, CW_3, WNi, FeW₃C, Fe₆W₆C, W₃O, W, C, and (Fe,Ni) phases.     

钢表面化学气相沉积TiC晶体的择优取向

本文用化学气相沉积(CVD)法,以TiCl_4-CH_4-H_2为原料气体,在不锈钢表面获得了致密的TiC膜.研究了TiC的成膜速度、表面形貌和晶体择优取向与沉积条什的关系.结果表明,沉积温度T_(dep),碳钛比CH_4/TiCl_4强烈地影响了TiC的成膜速度、表面形貌和晶体择优取向.CH_4/TiCl_4低时,TiC晶体的择优取向为(220):而CH_4/TiCl_4高时,TiC晶体的择优取向为(200).TiC晶体的择优取向主要取决于气氛中活性碳的平衡浓度。     

基于无人机倾斜摄影的嘉兴老城区住宅识别

为了应对老城区房屋数据信息不足、获取不便的问题,提出利用无人机（UAV）倾斜摄影测量技术实现老城区住宅自动识别的方法. 根据老城区典型多层住宅的外立面特征,确定出阳台构造、立面朝向和房屋长宽比3个参数控制的住宅判别标准. 通过无人机摄影测量获取嘉兴研究区的密集匹配点云、数字正射影像（DOM）和数字表面模型（DSM）数据. 融合DOM及DSM数据提取单体建筑轮廓,分割出单体房屋点云. 基于RANSAC算法提取房屋立面点云并确定立面朝向,根据立面的点云空间分布判断立面长度及阳台构造. 试验表明,在研究区应用该方法识别典型住宅的准确率可以达到90%.     

钼对渗碳过程中碳化物形态的影响

通过萃取复型观察和对衍射花样的标定，研究了深层渗碳过程中析出碳化物的形态和分布。实验结果表明：渗碳过程中析出的形态较好的碳化物，象点状、球状和椭球状碳化物均为钼的碳化物；而形态较差的针状、网状则为（Cr、Fe）7C3和（Fe，M）3C。并对其形成机理进行了初步探讨。     

基于阈值分割的松材线虫病树计数与定位

松材病虫病是最紧迫的威胁之一,最近对中国针叶林造成了严重破坏,为了阻止松材病虫病的快速传播,必须在早期准确检测和计数受感染的树木。提出了一种基于密度图的方法,用于从高分辨率航拍图像中估计具有松材病虫病的树木数量,方法引入了阈值分割、形态处理和超像素技术,以最大限度地减少由于建筑物和岩石等相似背景物体引起的误差。实验表明,所提出的方法优于密度学习 算法,平均绝对误差、均方根误差和绝对误差方差分别从21.3、22.2和127.2减少到8.0、11.7和59.6,计数准确率从54.7%提高到81.3%。