坦克行进间垂向稳定器机电液系统的建模与仿真

为了准确描述坦克行进间的火炮稳定系统,采用多体动力学软件RecurDyn和液压系统仿真软件AMESim,建立了基于多体动力学与液压系统控制的联合仿真模型。基于多体动力学软件建立了坦克行进间多体动力学模型,利用液压系统仿真软件,对垂向稳定器进行液压控制系统建模,通过接口模块完成了坦克行进间稳定性模型的联合仿真,对比了单侧布置和对称布置垂向稳定器方案。仿真结果表明:该文建立的联合仿真模型能够准确地对坦克稳定系统进行仿真,且满足坦克稳定系统稳定精度的要求; 对称布置方案可以有效提高稳定效果,为提高坦克高机动条件下的稳定性研究提供了一定的参考。     

准带线式板间UWB垂直互连研究

针对综合馈电网络常用的微波多层板及混压多层板,研究了一种新型准带线式超宽带板间垂直互连形式,该种垂直互连工作频带达到0 Hz~25 GHz,加工工艺简单,制造成本低。分析了0°和180°两种垂直互连形式,试验证明该形式板间垂直互连完全满足工程应用需求。     

浅谈短波天线的维护和保养

随着小功率短波实验台的不断建设,如何更好的利用和维护天线成了各短波实验台站关注的问题。本文以我台的垂直笼型天线为例进行介绍。垂直笼型天线在短波广播频段的中低频段具有较强的地波全向辐射能力,主要用于对城区和附近周边地区进行压制干扰。     

敦煌辐射校正场典型气溶胶垂直廓线的激光雷达观测

激光雷达可以获取气溶胶的三维信息。在2010年中国辐射校正场（Chinese Radiometric Calibration Site,CRCS2010）试验中,利用一部米散射激光雷达获取了敦煌辐射校正场区域15天的观测数据。利用经典的Fernald反演方法得到了这一区域的大气气溶胶消光系数垂直廓线并分析了其对辐射定标的影响。观测结果表明敦煌地区在从近地面到2～4 km处存在着一层气溶胶浓度高值层。用于辐亮度辐射定标的飞机飞行高度需要大于此高度,以避开气溶胶高浓度层的影响。并利用MODTRAN(MODerate resolution atmospheric TRANsmission))辐射模式中的气溶胶廓线与实测气溶胶廓线分别进行辐射模拟,对于FY3/MERSI各可见-近红外通道都有不同程度的差异,其中蓝通道（<500 nm）有4%～5%的辐射差异。     

一种解决COG图形型液晶显示模块竖条显示的方法

主要研究了COG图形型液晶显示模块的的深竖条显示问题,提出了一个如何提高IC驱动能力的方法。     

垂直腔面发射激光器中选择性氧化工艺稳定性研究

选择性氧化工艺已经成为制备高性能垂直腔面发射激光器(VCSEL)的关键技术,氧化后形成的氧化层提供了良好的电限制和折射率导引,但选择性氧化速率是呈线性规律还是抛物线规律仍存在很大的争议.在多种温度条件下,做了环形沟槽和环形分布孔的氧化实验,这是在垂直腔面发射激光器中采用的两种结构.实验结果表明,氧化窗口形状对氧化速率的影响也依赖温度条件,并对这种实验现象给出了定性解释.     

WLAN-GPRS Tight Coupling Based Interworking Architecture with Vertical Handoff Support

There have been parallel technological developments in wireless local network (WLAN) and cellular wide area network (WAN) technologies. This is evidenced by the boom in fast WLANs enabled devices, the spread of 2.5 G networks and the increasing emergence 3 G communication networks, applications and terminals. The prospects of integrating WLAN and cellular WAN technologies with support for seamless handoffs between the two heterogeneous have changed the mentality of researchers from considering WLAN technology as a threat to the future of wide area cellular networks to accepting the technology as a complementary solution. A number of architectures for interworking the two different network types have been proposed mainly based on the loose coupling interworking approach recommended by the ETSI. One of the main weaknesses anticipated with loose coupling architecture is excessive handoff latency, which may lead to data loss, traffic congestion and handoff failure. In this paper an architecture for interworking WLAN and the GPRS networks, based on the ETSI tight coupling approach, is proposed. Fredson Alfred Phiri holds a Master of Engineering Science (MEngSc) degree obtained from Multimedia University, Malaysia in 2005 and a Bachelor of Science degree in Electrical Engineering from the University of Malawi where he graduated in 2001. Mr. Phiri is currently working as a lecturer at the Polytechnic of Namibia (Namibia’s University of Science and Technology) where he also chairs the Electronics and Telecommunications (E-TEL) Research Group. He has previously worked as a lecturer at the University of Malawi, as a Telecommunications Engineer at Technocentre (Malawi), and as a Telecommunication Technician at the Malawi Telecommunications Limited (MTL). Mr. Phiri’s research interests include Integration of Mobile Data Networks, Network Programming and Powerline Communication. M.B.R. Murthy has obtained his B.E. (Electrical) from Andhra University, College of Engineering, Waltair, India, M.Sc (Engg) in Communication Systems from Regional Engineering College-Rourkela, India and PhD from Karnatak University, Dharwad, India. He has over 32 years of academic experience teaching under graduates and graduate students. He has vast research experience and has 43 publications in reputed journals and international conferences. He is a senior member at IEEE. He had six years of teaching and research experience at Multi Media University Malaysia. Currently he is Professor ECE and Dean PG engineering and R&D in GEC Gudlavalleru, India.     

Stacking number dependence of size distribution of vertically stacked InAs/GaAs quantum dots

Vertically stacked layer structure is useful for controlling the size distribution of quantum dots. The dependence of the size distribution of quantum dots on the stacking numbers is theoretically and experimentally investigated. We show that the size distribution of quantum dots decreases with increasing the stacking number, and it occurs drastically when the stacking number is changed from 1 to 2. The quantitative analysis on in-plane strain energy distribution is also performed for the explanation.     

利用Mirau型相关显微镜进行面型检测的研究

在Ｍｉｒａｕ型干涉仪的基础上,利用相关检测的原理,实现了Ｍｉｒａｕ型相关面型检测仪。通过该面型检测技术,克服了移相显微干涉（ＰＳＭＩ）面型检测系统中纵向分辨能力受衍射效应制约这一限制,正确测量了面型的纵向尺度。     

一种新的无线异构网络的自适应垂直切换算法

针对当前无线异构网络融合技术中的垂直切换机制,提出了一种以平均接收信号强度为评价指标,并由此指标判断可能的运动趋势的自适应垂直切换算法。仿真结果表明:相比于传统的固定门限的平均接收信号强度垂直切换算法,提出的方法能较好地预测并提前触发该发生的切换,改善切换性能。