基于瞬态熔融理论的新型螺杆研究

通过对挤出机固体输送段物料融解过程的分析，提出了通过在螺槽中垫高固体床，将熔化的熔融物挤进螺槽内侧的熔池中，而在螺槽内侧的熔池保持高度不变，从而使物料和熔融物相对分离，以提高熔化速率以及减少熔融物降解的新型螺杆模型。     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

Time‐dependent heat transfer coefficient of a wall

A time‐dependent coefficient of heat transfer is proposed for the computation of thermal power required, so that a room temperature reaches a desired value within a given time. A mathematical formulation of the room heating transient phenomenon is constructed in a dimensionless form. Using an integral approximate solution an analytical expression for this coefficient is provided and it is verified by diagrams adopted by DIN 4701. Copyright © 2003 John Wiley & Sons, Ltd.     

纳秒级上升时间的高压脉冲群电源

按照IEC 61000-4-4/GB 17626.4—1998的要求，首先应用PSPICE仿真确定电路中各元件的参数值，然后基于拉普拉斯变换用MATLAB求解二阶电路验证各元件参数。在此基础上研制了一台以开关电源作为高压直流电源、以氢闸流管作为主控开关的脉冲群电源。该电源体积小、重量轻、效率高、成本低廉。试验结果表明，其输出信号符合标准要求，可用于快速瞬变脉冲群抗扰度试验。     

昆2井优快钻井及油气层保护技术

昆2井是一口位于柴北缘西段的昆特依凹陷潜伏Ⅰ号圈闭上的风险探井,设计井深为5950m。针对柴北缘深探井存在的主要技术难题,制定了昆2井的技术对策。通过对钻井设备的优选、井身结构的优化、钻头及钻具组合的优选、钻井参数及钻井液性能的优化、油气层保护技术的研究与应用,形成了一套适合于柴北缘的优快钻井技术,使昆2井的完钻井深达到5950m。与邻区的深探井平均水平相比,在井深增加888m、大尺寸井眼段更长的前提下,昆2井的钻井、完井周期分别缩短了98.75d、124.2d,钻机月速度增加了317m/台,平均机械钻速增加了0.82m/h。根据“理想充填新理论”,确定了保护油气层的最优复配暂堵方案,利用该方案所配制的钻井液其渗透率恢复值达到了87.5%以上,流变性能良好,滤失量低,对改善泥饼质量、增强井壁稳定性有明显的效果。     

ZZ3200-14.5/28型支架快速倒装的实践

根据桃园矿单翼相邻工作面倒装的实践,从加快综采设备的搬家速度、提高劳动效率方面,简述桃园矿综采快速倒装的几点主要做法。     

Influence of deposition parameters on hole mobility in polymorphous silicon

Time-of-flight transient photoconductivity measurements reveal a monotonic increase with the deposition pressure in the hole mobility in polymorphous silicon for samples deposited under hydrogen dilution. With helium dilution, a maximum mobility that matches the highest value from H-dilution samples is measured at the intermediate pressure of 1.4 Torr. The deposition rate of those samples is twice the rate for the H-dilution ones. For the samples with the best hole mobilities, the valence-band tail is comparable to the one of standard hydrogenated amorphous silicon.     

快速汉克尔变换及光束均匀化

介绍快速汉克尔变换，以及它在二元光学设计中的应用，并就光束均匀化问题进行了数值模拟，结果表明快速汉克尔变换算法是一种能用于二元光学设计的有效算法。     

Thermal and thermoelastic properties of fast extrusion furnace (FEF) carbon black loaded SBR vulcanizates

The effect of FEF carbon black as filler on the thermal capacity c, diffusivity a, and thermal conductivity λ, of styrene butadiene rubber (SBR) composites in the temperature range 300–420 K was studied. The filler strongly increases the thermal diffusivity, whilst strongly decreasing the thermal capacity and the thermal conductivity (except at high FEF content ≥80 phr). The influence of the filler on the thermoelastic behaviour of the same composites was also investigated. It was found that the thermoelastic temperature change (ΔT) increased with carbon black concentration as well as the entropy change per unit extension.     

液态金属钠高温沸腾实验回路应力分析与强度计算

本文主要完成了液态金属钠高温沸腾实验回路的应力分析与计算，确定了回路高温区连接管系的布置型式和支吊架系统，是该回路总体设计的重要组成部分。