液态金属钠高温沸腾实验回路应力分析与强度计算

本文主要完成了液态金属钠高温沸腾实验回路的应力分析与计算，确定了回路高温区连接管系的布置型式和支吊架系统，是该回路总体设计的重要组成部分。     

紧凑式换热面瞬态实验中的全程直接配比法

在紧凑式换热面的瞬态实验中，为获得准确的实验结果，不仅要建立符合试验工况的理 论解，而且还要选择合适的配比方法，以便尽可能减小测量误差对配比结果的影响．本文就瞬态实 验的配比，提出了一种新的基于计算机的全程直接配比法，由于它采用了所有可用测试点进行配 比并且其理论解与实测值的配比误差是通过最小搜索步长来控制的，因此，实验结果的准确性和 可靠性优于通常应用的间接配比法和选点配比法．     

GEOLOGICAL MODEL EVALUATION THROUGH WELL TEST SIMULATION: A CASE STUDY FROM THE WYTCH FARM OILFIELD, SOUTHERN ENGLAND

This paper presents an approach to the evaluation of reservoir models using transient pressure data. Braided fluvial sandstones exposed in cliffs in SW England were studied as the surface equivalent of the Triassic Sherwood Sandstone, a reservoir unit at the nearby Wytch Farm oilfield. Three reservoir models were built; each used a different modelling approach ranging in complexity from stochastic pixel‐based modelling using commercially available software, to a spreadsheet random number generator. In order to test these models, numerical well test simulations were conducted using sector models extracted from the geological models constructed. The simulation results were then evaluated against the actual well test data in order to find the model which best represented the field geology. Two wells at Wytch Farm field were studied. The results suggested that for one of the sampled wells, the model built using the spreadsheet random number generator gave the best match to the well test data. In the well, the permeability from the test interpretation matched the geometric average permeability. This average is the “correct” upscaled permeability for a random system, and this was consistent with the random nature of the geological model. For the second well investigated, a more complex “channel object” model appeared to fit the dynamic data better. All the models were built with stationary properties. However, the well test data suggested that some parts of the field have different statistical properties and hence show non‐stationarity. These differences would have to be built into the model representing the local geology. This study presents a workflow that is not yet considered standard in the oil industry, and the use of dynamic data to evaluate geological models requires further development. The study highlights the fact that the comparison or matching of results from reservoir models and well‐test analyses is not always straightforward in that different models may match different wells. The study emphasises the need for integrated analyses of geological and engineering data. The methods and procedures presented are intended to form a feedback loop which can be used to evaluate the representivity of a geological model.     

DX centers in AlxGa1-xAs bulk alloy,AlAs/GaAs ordered,and disordered superlattices

Properties of theDX centers in Al_0.5Ga_0.5As bulk alloy (b-AL), (AlAs)₂ (GaSa)₂ ordered superlattice (o-SL) and (AlAs) _m (GaAs) _n disordered superlattice (d-SL) (m = 1, 2, 3,n = 1, 2, 3) with the same macroscopic composition were measured and compared. By deconvolution of deep level transient spectroscopy (DLTS) spectrum due to theDX center, we have found a decrease in the number of separate peaks in DLTS spectrum in an intentionally atomic ordered arrangement. Visiting Scholar of the Japan Society for the Promotion of Science. On leave from Department of Electrical Engineering, San Jose State University, San Jose, California 95192-0084, USA.     

用瞬态频率波动法诊断齿轮故障

利用瞬态频率波动法实现频率调制信号的解调，提取齿轮的局部裂纹信息，并通过黄河ＴＮ２５２型汽车变速器疲劳试验的信号分析来验证。     

10Gbit/s甚短距离传输系统接收模块研究

本文研究了符合OIF—VSR4—01．0规范的甚短距离（VSR）并行光传输系统转换器集成电路，实现了接收部分转换器集成电路中帧同步、8B／10B解码、12路通道去斜移、检错纠错等模块的设计。在Altera的Stratix GX系列的FPGA上实现了接收部分转换器集成电路。仿真分析的结果表明所设计的各个模块能正确的实现接收部分转换器集成电路的功能，给出了仿真结果。     

螺栓联接法兰瞬态温度场分析

建立了螺栓法兰联接的三维力学及传热学模型,在考虑垫片非线性基础上,研究了法兰的瞬态温度场分布以及温度场的变化,对垫片和螺栓载荷的影响.研究表明,由于瞬态温度场的影响,螺栓载荷变化滞后于垫片载荷的变化,并且随着内壁温度的升高而增加;垫片外侧载荷变化呈先升后降的规律.     

我国核裂变能可持续发展战略研究

本文从科学技术的角度,分析我国国民经济增长对核能发展的需求,探讨我国核能的近中期发展战略构想,指出为实现其发展战略目标而应重点研究的关键科学技术与问题,并提出一些相关的政策建议,为国家制定核能中长期发展规划提供参考。     

Accurate measurement of capture cross sections in deep level transient spectroscopy: Application to EL2 in GaAs

A rigorous formulation of capacitance changes during trap filling processes is presented and used to accurately determine the electron capture cross section of EL2 in GaAs at a particular temperature, 377K, in this case. The value, σ_n (377K) = 2.7 × 10⁻¹⁶ cm², is compared with that predicted from the emission dependence.     

动态信号分析系统的进展及应用

本文综述了动态信号分析仪器与系统的发展,并综合介绍了双通道动态信号分析仪的构成、性能与指标,以及由动态测量、数据采集、信号处理等硬件与相应软件组成的多通道动态信号分析系统的进展.