实施取水定额管理的几个关键问题探讨

通过对全国23个省级单位出台的用水定额标准进行分析，指出目前定额管理存在6个主要问题：一是概念模糊，二是制定方法不统一、不规范，三是定额标准体系不完善，四是可操作性较差，五是计量系统不完善，六是缺乏取水定额管理信息化平台。提出应采用“取水定额”这一表述，并提出了取水定额的体系，包括基础计量体系、定额制定体系、信息链体系、定期更新体系4部分。明确了取水定额管理体系建设主要内容应包括：法律法规体系、定额制定体系、水价管理体系、信息通道体系。     

通过室内实验及同位素测井技术评价高分子聚合物驱油效果

2500万超高分聚合物室内驱油实验研究了聚合物分子量、浓度、粘度、聚用量、段塞组合等各项性能指标对驱油效果的影响。本文根据室内实验结果,在北一区断西注聚后期开展矿场试验,取得了较好的开发效果。试验前后对比,注入粘度明显增大,月含水上升速度得到有效控制,吸入剖面有了新的动用,有63.1%的油井出现了明显的二次受效特征,取得了显著的经济效益。同时对驱油效果进行系统分析。驱油效果表明:应用2500万超高分聚合物是进一步提高聚驱采收率的有效途径。     

浅议铝箔项目的给排水设计

通过铝箔项目的工程实例,详细介绍了铝箔项目给排水专业设计的主要构成,并总结了几点设计体会,可供有关专业设计人员借鉴、参考。     

蒸汽凝结水除油试验研究

介绍了利用类萃取技术进行蒸汽凝结水除油的过程。利用具有亲油功能的HOL-100树脂,经过试验和工业应用证明,萃取除油可以达到1．0mg/L以下,可满足炼油化工装置锅炉用水对含油量的要求。HOL-100树脂具有在高温状态下(120℃)除油的特点。通过标定考核,萃取除油技术是一项节能、节水、环保措施,可在中石油和中石化企业推广应用。     

FE Simulation for Internal Inversion of Aluminium Alloy Tube

1 Introduction A double-walled invertube is difficult to fabricate other than applying inversion process. Such kind of invertube can be used as impact energy absorbing element in transport vehicles, like aircrafts and automobiles. Reddy T Y[1] did the analysis of Internal inversion and calculated the inversion load. Reid[2] et al. examined nosing and internal inversion of cold drawn steel tube by the finite element package ABAQUS. Recently, Rosa P A[3] et al. investigated Internal invers…     

Displacement Discontinuity Method for Fracture Mechanics Analysis of Reissner Plates: Static and Dynamic

This paper is concerned with the displacement discontinuity method applied to the shear deformable plates (Reissner’s and Mindlin’s theories) with cracks subjected to static and dynamic loads. Fundamental solutions of dislocation are derived using the Fourier transform method and the Laplace transformation technique. Boundary integral equations are presented in terms of rotations/displacement on the crack surfaces. The Chebyshev polynomials of the second kind are used to evaluate the integral equations with hypersingular kernels on the crack boundaries and determine the stress intensity factors at the crack tips. Comparisons are made with other numerical solutions to demonstrate the proposed method is accurate both for static and dynamic problems.     

Influence of influent tributaries on water quality changes in Lake Mogan, Turkey

Lake Mogan, located in the steppes of central Anatolia, is a vital Turkish ecological system, in terms of its water resources, flora and fauna. The lake also is a unique recreational area for Ankara, the capital of Turkey. However, the lake is currently threatened by severe pollution, being under the risk of serious degradation because of (i) uncontrolled urbanization; (ii) point and non‐point source pollution; (iii) inefficient sewerage systems; (iv) sediment transportation and pollution via influent creeks to the lake; (v) uncontrolled soil erosion in its drainage basin; (vi) inappropriate flood control measures; and (vii) severe degradation of the natural wetlands within its drainage basin. This study evaluates the influence of its influent creeks on the water quality of Lake Mogan, mainly because the creeks are believed to be responsible for the major pollutant load reaching the lake, and because the extensive database documenting this situation has not previously been critically evaluated. Accordingly, this study reviews (i) change in the water quality of Lake Mogan between 1993 and 2002; (ii) the water quality classification of the major influent creeks feeding Lake Mogan; and (iii) the influence of the influent creeks on the water quality of the lake between 1993 and 2004.     

压裂泵往复密封性能及机理研究

根据流体动压润滑理论，对压裂泵柱塞密封摩擦副的润滑机理进行了理论分析。在排出和吸入行程，柱塞密封摩擦副均能满足流体动压润滑的条件，即在柱塞与密封界面上能形成并保持一定厚度的油膜润滑密封，从而达到减小摩擦提高寿命的目的；建立了摩擦界面油膜厚度和泄漏量的计算公式。利用有限元法理论，对密封圈的压力沿轴向的分布规律、泄漏量与压力变化关系进行了模拟计算。对往复密封圈沿轴向压力分布、泄漏量随压力变化进行了测试；试验结果表明，建立的计算模型具有较高的计算精度，揭示了压裂泵的密封机理。     

Quasi-static and dynamic crushing behaviors of aluminum and steel tubes with a cutout

Tubular members are commonly used as an energy absorber in engineering structures and many such members have a cutout. In this study, the crushing behaviors of tubes with a cutout are characterized and the effects of cutout on the energy absorption capabilities of these tubes are quantified. Systematic parametric studies were carried out to study the effect of material properties, including yield and ultimate strength of material, strain rate effect, location of cutout, tube length and impact speed on the crushing behaviors and energy absorption capacity of aluminum and steel tubes. First, a numerical model was constructed with a commercial explicit finite element code. It will be first proven that the numerical simulation can produce sufficiently accurate results in an economic manner. Subsequently, the crushing behavior of aluminum and steel tubes with a cutout was experimentally characterized and their energy absorption capacity was evaluated in terms of mean crushing force, peak crushing force and specific energy absorption (SEA). Tubes of various lengths with a cutout located at different locations, subject to both quasi-static and dynamic impact loadings were considered. For steel tubes, the numerical simulation investigated the influence of the strain rate effect and variation in strain hardening ratio of the material. Empirical equations describing the mean and peak crushing forces of aluminum and steel tubes with a cutout were developed using linear and nonlinear regression methods applied to the results obtained from the numerical and experimental studies.     

Iterative finite element model of nonlinear viscoplastic analyses for blended granular porous media

The iterative finite element model, in which an element is used to represent a single particle, is generated to analyze the global behavior of multiple-material aggregates of materially nonlinear viscoplastic particles. The generalized Maxwell model is used to define four types of specific nonlinear viscoplastic materials, which are the elasto visco-plastic matter with linear viscosity, the plasto visco-plastic material with linear viscosity, the elasto visco-plastic media with nonlinear viscosity, and the plasto visco-plastic media with nonlinear viscosity. The theory and relevant penalty iterative algorithm are developed to analyze the four representative mixed granular systems consisting of materially nonlinear viscous particles. To verify precision of stress calculation, solutions of an axis-symmetric radial flow problem are compared with results of the literature and they are in a great agreement. The results present here provide significant insight into the fundamental behavior of granular media under compaction conditions, including prediction of the overall aggregates stress-strain response.