安哥拉吉拉索原油评价

对安哥拉吉拉索原油及其宽馏分的性质进行了分析评价，分析结果表明，该原油属低硫中间基中质原油，并针对各馏分提出了合适的加工方案。     

多种措施并举 建设旱作农业

肇州县有耕地183万亩,草原85万亩。年平均降水量455毫米。境内无江、无河,属于严重干旱的县份。多年实践证明,肇州县要实现农业的可持续性发展,必须走以耕作措施为基础、以工程措施为补充、以栽培措施为手段、以生态措施为保障的生态旱作农业之路。 一、强化耕作措施,不断提高土壤蓄水保墒能力     

淮北砂姜黑土区降雨入渗补给系数与其影响因素关系分析

在人们直观认识中，降雨入渗补给系数αg随降雨量、地下水埋深、包气带土壤含水量等因素呈单一变化，其至拟合出某些经验公式，这种认识是片面的，淮北砂姜黑土αg同时主要受以上3种因素的影响，是多种因素同时作用的结果，而且这3种因素影响作用基本相当，所以，不加任何条件地说αg，随某一因素而单调变化，显然是不合于客观情况的，本文通过砂姜区αg形成的机制，并结合110组数据和客观现象，分析了本区降雨入渗补给系数随其主要影响因素的变化规律。     

大豆蛋白在工业上的开发利用及理化改性研究进展

论述了关于大豆蛋白在工业上的开发利用研究发展进程，综述了国内外最新关于大豆蛋白改性研究的理论成果。     

石墨化钢等温淬火后的力学性能和减振特性

与球墨铸铁比较，在石墨化钢中，由于含碳量较低，因而低强度和低塑性的石墨含量较少，这就有可能采用热塑性变形和随后热处理的方法来获得较好的强度和塑性的组合。本文对石墨化钢和球墨铸铁不同热处理后性能进行了对照分析。     

Relationship Between Coal Powder and Its Combustibility

Coal‘s volatile component ,ash and fixed carbon content have different function in different stages of a combustion process,but the traditional coal classification can precisely show its combustion property.In this experiment coal‘s evaluation indeves(ignition index Di),(burn off index Df) were used to qualitatively show the ignition property and combustion ending property of coal samples.Meanwhile,considering actual heating circumstances in calciner(in cement plants),this thesis established the relationship among the ignition index,burn off index and coal‘s industrial analysis value,which makes it possible for the user to predict the quality of coal before using it and is very valuable in practice.     

对第四系地层工程地质勘探中的几点建议

工程地质勘探,主要就是要查清地层结构、分布状况及土的物理力学性质指标.但土的分布及结构特性与其它的诸如混凝土、砖瓦、钢筋等人造建筑材料不同,其特性不是一定的.不同的地貌单元、场地、深度及含水状况均带来不同的特征值.文章对取得这些特征值的过程中所存在的一些问题进行探讨.     

Effects of Heat Treatment Temperature and Time on Structure and Static Magnetic Property of W-type Ferrite Hollow Mierospheres

Hollow spheres of hexagonal ferrite BaCozFelrO27 were fabricated through a spray pyrolysis technique using co-precipitation ferrite powder precursor as materials, followed by calcinations in an air atmosphere. The phase composition, micro-morphology, and static magnetic property of the particles were measured by XRD, SEM, and VSM. The results indicate that the method for preparation of ferrite hollow microspheres （FHM） results in a broad particles size distribution. The density of FHM decreased from 5.31 g/ cm^3 to 2.31 g/cm^3. When the heating rate was 5℃/min, and temperature was 1 200℃ for 4 hours, pure W-type ferrites were formed. With the heat treatment temperature and time increasing, the crystal structure becomes perfect, the saturation magnetization is increased and the coercive force is decreased.