Magnetic and mechanical properties of FeSi alloys with high Si content

The chemical vapor（CVD） deposition-diffusion method was applied to prepare FeSi alloys with high silicon content up to 6.5%. In spite of various deposition and post-annealing, the sample remains α-Fe bcc structure. The cross section of the composition was analyzed to evaluate the Si content and distribution before and after annealing. The results show that the soft magnetic properties are improved by increasing the silicon content. For the samples containing about 6.5% Si, the coercivity decreases to 60 from 237.3 A/m of the original. It is also obtained that, in addition to the Si content, Si distribution has a large influence on the core loss due to the effect of resistivity. The micro-hardnesses were also evaluated along the cross-section after various annealings.     

Preparation and properties of PAn/ATTP/PE conductive composites

Polyaniline/Attapugite/PE（PAn-ATTP/PE）composites containing particles with core-shell structure were obtained via the two-step blending processs. The experimental condition is as follows： Organo-attapulgite and PAn was obtained by modifying attapulgite with laury benzenesulfonic acid sodium salt and, then added to PE. The electrical conductivity, structure and properties of the composites were studied. Under the function of shear stress, core-shell structure particles with ATTP as the core and PAn as the shell were formed in the composites. The structure of PAn-ATTP/PE composites were characterized by FTIR,XRD,SEM, etc, respectively. The effects of concentration of doping agent on the conductivity and mechanical property of the composites were investigated. The mechanical properties and impact fracture surface of the ternary composites were studied by means of the tensile tester, SEM, etc. The results show that polyaniline encapsulated ATTP enhances the strength of the PE. And the conductivity of PAn-ATTP/PE composites of is improved effectively when polyaniline encapsulated ATTP is added. The composite have good conductivity when 10% polyaniline encapsulated ATTP is added.     

Ti—Al二元合金的成分对组织和力学性能的影响

用金相、扫描电镜和X射线衍射研究了6种不同Al含量Ti-Al二元合金铸态和退火态的组织结构和相组成的特征和变化。从结晶动力学的观点,分析了合金的结晶凝固过程。采用三点弯曲方法研究了合金的抗弯性能同Al含量的关系。结果表明,Al含量为34 wt%,经1100℃/30 h退火的合金抗弯性能最好,Al含量偏离34wt%,都对合金的力学性能不利。     

Al—Mg—Li—Ag—Zr合金的时效特性

研究了添加不同量的Ｌｉ对Ａｌ－Ｍｇ－Ａｇ－Ｚｒ合金时效组织和机械性能的影响。通过时效硬度、拉伸强度和延伸率的测试，以及Ｘ射线衍射分析和ＴＥＭ观察，证明在Ａｌ－Ｍｇ－Ａｇ－Ｚｒ合金中加入Ｌｉ可使合金得到显著的时效硬化和强化，但仅当Ｌｉ的在１．７５％时，该合金才具有优良的综合力不性能；在含Ｌｉ量较低的Ａｌ－Ｍｇ－Ｌｉ－Ａｇ－Ｚｒ合金中生成Ｔ相，且Ｔ相的生成有利于该合金综合性能的提高。     

木瓜凝乳蛋白酶的分离纯化及性质研究

目的　建立简单有效的木瓜凝乳蛋白酶分离纯化方法 ,并研究其酶学性质。方法　采用离子交换层析直接将木瓜凝乳蛋白酶分离纯化 ,通过温度、葡萄糖、盐酸胍及其他因素研究酶学性质。结果　木瓜凝乳蛋白酶有较高的热稳定性 ,盐酸胍对其有抑制作用 ,葡萄糖对其有激活作用。结论　离子交换层析是简单有效的分离纯化木瓜凝乳蛋白酶的方法 ,木瓜凝乳蛋白酶值得进一步开发利用。     

青酶胺的研究现状及展望

本文详述了青酶胺的性质、应用和研究现状并展望其发展方向。     

镁铝合金性质研究及测定原理

镁铝合金又名铝镁合金，分子式：Mg4Al3，分子量：178．22颜色为灰褐色，比重约为2．15g／cm^3，熔点463℃，燃烧时产生的温度高达2000℃—3000℃。在烟花生产中起着非常重要的还原剂作用，也可作为白光剂和照明剂。     

界面扩展粘度的测量

介绍了界面扩展粘度κ的测定方法及其原理 ,列出了其相应的测定结果 ,同时对各种测定方法进行了分析与比较 ,并对它们的优缺点进行了讨论