Al2O3对唐钢高炉炉渣性能的影响

针对唐钢近2年提高进口矿配比后，Al2O3含量升高对炉渣流动性带来的不利影响，对唐钢高炉的炉渣性能进行了试验研究。并结合国内同行业的生产实践经验，从理论上分析了炉渣中Al2O3及MgO的适宜含量范围，着重论述了唐钢所处冀东矿区条件下降低Al2O3的主要途径及适应高Al2O3炉渣的具体措施。     

Computations of Explosive Boiling in Microgravity

Dynamics of the explosive growth of a vapor bubble in microgravity is investigated by direct numerical simulation. A front tracking/finite difference technique is used to solve for the velocity and the temperature field in both phases and to account for inertia, viscosity, and surface deformation. The method is validated by comparison of the numerical results with the available analytical formulations such as the evaporation of a one-dimensional liquid/vapor interface, frequency of oscillations of capillary waves, and other numerical results. Evolution of a three-dimensional vapor nucleus during explosive boiling is followed and a fine scale structure similar to experimental results is observed. Two-dimensional simulations yield a similar qualitative instability growth.     

变频调速器在桥式抓斗吊车中的应用

论文主要介绍了电机的调速方法、变频器的工作原理以及日本FRNIC500G7型变频器在桥式抓斗吊车上的应用，并分析了使用绕线式电机调速与鼠笼式电机变频调速之间的优缺点。     

An engineering process for the verification of real-time systems

The complete verification of the timing properties of a large critical system cannot be undertaken in a single step or with a single method. In this paper we present a process that links together a number of techniques and approaches that cover all stages of development from requirements analysis to code testing. The key elements of the process are: a constrained form of timed automata that uses delay and deadline to define temporal behaviour, notions of rely and guarantee to cover temporal dependencies, model checking for design verification, SPARK and Ravenscar restrictions for programming, and scheduling and response time analysis for asserting implementation compliance. Extended examples of the use of the process are given.     

一种精密温度控制仪

采用精密温度补偿及在传统PID调节基础上运用模糊控制运算 ,实现以单片机为基础开发研制的精密温度控制仪 ,并输出时间开关量信号和 4～ 2 0mA标准电流信号 ,为闭环控制及温度值远传提供依据。     

The silence of the library: Environment, situational norm, and social behavior.

On the basis of the idea that situational norms are mentally represented as associations between environments and normative behavior, it was proposed that an environment can automatically direct normative behavior. More specifically, when situational norms are well-established (e.g., when entering the library, one should be silent), an environment is capable of automatically activating mental representations of normative behavior and the behavior itself. In these experiments, participants were exposed to pictures of environments, and effects on accessibility of representations of normative behavior and on actual behavior were assessed. Results indicated that representations of behavior and actual behavior itself are activated automatically when (a) goals to visit the environment are active and (b) strong associations between environment and normative behavior are established. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

La改性的Ag/TS-1催化剂上丙烯选择氧化制环氧丙烷

在H2 和O2 混合气体存在下 ,在常压固定床、石英反应器上考察了La改性的Ag/TS - 1催化剂催化丙烯环氧化反应。研究结果表明 ,Ag和La负载在TS - 1上的先后顺序对丙烯环氧化反应有影响。H2 在丙烯气相氧化反应体系中起着重要的作用。     

稠油注汽井用高温调剖封窜剂的研制与应用

随着单井蒸汽吞吐周期的增加，加剧了油层纵向和平面上的非均质性。汽驱井组油层存在高渗透带或孔道，注入蒸汽上升，从稠油顶部跨越，会出现越顶现象，造成提早汽窜，注蒸汽驱的波及效率进一步降低。针对此问题，开发了稠油注汽井用高温调剖封窜剂。室内研究结果表明，研制的高温调副封窜剂HD、HT具有较好的高温成胶性能和强度。现场应用孤东油田的9口井，有效8口，有效率88．9％，累计增油726．8t。     

Quantification of the layer dispersion degree in polymer layered silicate nanocomposites by transmission electron microscopy

As the performance of polymer layered silicate nanocomposites strongly depends on their interior layer dispersion, quantification of the layer dispersion degree is needed. In this work, a new methodology was developed to determine the dispersion parameter D_0.1, based on the measurement of the free-path spacing distance between the single clay sheets from the transmission electron microscopy (TEM) images. Several examples of exfoliated, intercalated, and immiscible composites were studied. It was found that the exfoliated composites had D_0.1 over 8%, while that of intercalated composites were between 4 and 8%. In the case of intercalation, a high frequency peak appeared at a short spacing distance in the histogram, which was a characteristic of the intercalation, distinct from the exfoliation. The main utility of this TEM methodology is for the quantification of exfoliated or intercalated samples with small number of layers with stacks. The dispersion parameter D_0.1 below 4% was suggested to classify as immiscible. A unique advantage of the TEM measurement is that the dispersion degree of different fillers can be counted individually.