Development Tendency of the Refractories for Iron ＆ Steel Industry in China

This paper introduces the developing tendency of refractories for iron and steel industry combined with the new metallurgical techniques applied in iron and steel industry in China. Refractories for blast furnace long service life, smelting reduction iron-making process, secondary refining metallurgies and clean steel making, near net shape continuous casting are described respectively. To meet the requirement of iron and steel industry, the high quality, multi-functions and environment-friendly refractories with long service llfe will be focused and developed in the future. In addition, high grade refractories in China have great developing space and potential market.     

1,10-邻二氮菲-苦味酸三元配合物分光光度法测定痕量铁

利用在醋酸 -醋酸钠缓冲溶液 (pH4.6)中Fe2 +与 1,10 -邻二氮菲 -苦味酸盐形成橙红色配合物的显色反应 ,建立了一种新的测定人发中痕量铁的分光光度法 ,用于正常人及患者头发中的痕量铁分析。     

Failure mode and effects analysis using D numbers and grey relational projection method

Failure mode and effects analysis (FMEA) is a widely used risk assessment tool for defining, identifying and eliminating potential failures or problems in products, process, designs and services. Two critical issues of FMEA are the representation and handling of various types of assessments and the determination of risk priorities of failure modes. Many different approaches have been suggested to enhance the performance of traditional FMEA; however, deficiencies exist in these approaches. In this paper, based on a more effective representation of uncertain information, called D numbers, and an improved grey relational analysis method, grey relational projection (GRP), a new risk priority model is proposed for the risk evaluation in FMEA. In the proposed model, the assessment results of risk factors given by FMEA team members are expressed and modeled by D numbers. The GRP method is used to determine the risk priority order of the failure modes that have been identified. Finally, an illustrative case is provided to demonstrate the effectiveness and practicality of the proposed model.     

Single-phase gold/palladium catalyst: The nature of synergistic effect

The liquid phase oxidation of glycerol with oxygen has been studied using mono and bimetallic catalysts based on Au and Pd metals supported on activated carbon, in order to study the effect of the metal on the distribution of the products and on activity of catalysts. It was found that by using bimetallic catalysts (Au–Pd) a strong synergistic effect was shown. By using a preformed nucleating centre we were able to obtain a single alloyed phase, which allowed us to address the synergistic effect to the presence of alloyed Au/Pd. The advantage of using this latter catalyst lies not only in the high activity but also in a prolonged catalyst life. Although a partial leaching of palladium and assembling of the particles have been revealed by ICP and HRTEM respectively, activity after 10 re-cycles decreased less than expected (about 10%).     

火焰原子吸收光谱法测定芥蓝中钙、镁、铜和铁

火焰原子吸收法测定芥蓝中的钙、镁、铜和铁含量,相对标准偏差为1.45%~2.03%,回收率为96.8%~100.1%。结果表明芥蓝含有丰富的微量元素。     

灰色关联分析法在矿体可崩性评价中的应用

在用软划分方法建立矿体可崩性分级标准的基础上，提出了评价矿体可崩性的灰色关联分析法，并结合实例进行了验证．     

Study of the NOχ reaction with reducing gases on Fe/ZrO2 catalyst

The Fe/ZrO₂ catalyst (1% Fe by weight) shows a strong adsorption capacity toward the nitric oxide (at room temperature the ratio NOFe is ca. 0.5) as a consequence of the formation of a highly dispersed iron phase after reduction at 500–773 K. Nitric oxide is adsorbed mainly as nitrosyl species on the reduced surface where the Fe²⁺ sites are prevailing, but it is easily oxidised by oxygen forming nitrito and nitrato species adsorbed on the support. However, in the presence of a reducing gas such as hydrogen, carbon monoxide, propane and ammonia at 473–573 K the Fe-nitrosyl species react producing nitrogen, nitrous oxide, carbon dioxide and water, as detected by FTIR and mass spectrometers. The results show that nitric oxide reduction is more facile with hydrogen containing molecules than with CO, probably due the co-operation of spillover effects. Experiments carried out with the same gases in the presence of oxygen show, however, a reduced dissociative activity of the surface iron sites toward the species NO_χ formed by NO oxidation and therefore the reactivity is shifted to higher temperatures.     

New synthesised pyridazine derivatives as effective inhibitors for the corrosion of pure iron in HCl medium

The inhibition of pure iron in 1 M HCl by new synthesised pyridazine compounds has been studied by weight loss, electrochemical polarisation and electrochemical impedance spectroscopy (EIS) measurements. The results obtained reveal that these compounds are efficient inhibitors. The inhibition efficiency increases with the increase of inhibitor concentration and reached 98% at 10⁻⁴ M for 5-benzyl-6-methyl pyridazine-3-thione. Potentiodynamic polarisation studies clearly reveal that the presence of pyridazines does not change the mechanism of hydrogen evolution and that they act essentially as cathodic inhibitors. The temperature effect on the corrosion behaviour of pure iron in 1 M HCl without and with the pyridazines at 10⁻⁴ M was studied in the temperature range from 298 to 353 K. EIS measurements show that the increase of the transfer resistance with the inhibitor concentration.     

新型环氧防腐涂料的研究

采用在环氧树脂中加入纳米复合铁钛粉防锈颜料WD—D-325、固化剂、制备了新型环氧树脂防腐涂料。由于纳米技术的特性，该防腐涂料具有较高的防腐性、优异的附着力和柔韧性。实验确定了复合铁钛粉防锈颜料在环氧防腐涂料中的添加量。作为新型的环保颜料，复合铁钛粉防锈颜料可以替代红丹、锌铬黄等颜料。     

一种基于灰色系统理论的控制系统参数辨识算法的仿真研究

灰色预测补偿是一种对灰色系统进行白化的算法,该算法需要的信息少、计算量小。它可以克服常规PID控制存在超调的缺点。根据灰色PID控制算法,对系统不确定部分建立灰色模型,进行灰色预测补偿。通过仿真研究,该算法具有较强的鲁棒性,可以提高控制质量,减小控制系统的误差。