3,5-二氯苯甲酸的合成

考察了在以邻氨基苯甲酸为原料，三氯化铁为催化剂，X为溶剂，直接通氯氯化，再经重氮化合物3，5－二氯苯甲酸的工艺过程中，物料配比，反应湿度等反应条件对收率的影响，确定了合成的适宜条件，通过此合成工艺，产品的收率可达85％以上。     

柱前衍生反相高效液相色谱法快速测定3,5-二氯苯甲酰氯

以无水甲醇作柱前衍生试剂，建立了反相高效液相色谱法间接测定3，5-二氯苯甲酰氯的新方法。实验结果表明，在流动相：甲醇-水（85：15），流速：1．0mL／min，检测波长：288nm的条件下，定量校正曲线具有良好的线性关系，相关系数（r）为0．9999。方法用于样品中标题物质的测定，RSD=0．19％（n=6），加标回收率为99．9％-105％。     

Electrochemistry at capped platinum nanoparticle Langmuir Blodgett films: A study of the influence of platinum amount and of number of LB layers

Platinum nanoparticles (n-Pt), over-grafted with 2-thiophenecarbonyl chloride are assembled on gold electrodes, by the Langmuir Blodgett (LB) technique using behenic acid (BHA) as promoting agent. These layers are electrochemically active without any preliminary activation. The [Fe(CN)₆]^3−/4− redox couple was used as electrochemical probe. This paper reports on the influence of the number of deposited LB layers, and the n-Pt density on the electrochemical response. n-Pt density was modified by the change of the “BHA/n-Pt” ratio. Cyclic voltammograms of “[Fe(CN)₆]^3−/4−” were observed whatever the coating conditions. As soon as the first layer was deposited the electrochemical response was associated to the n-Pt coverage, its response slightly increased up to a steady state for five or seven layers. As expected, the increase of the Pt density favored the increase of the current density. XPS analysis performed before and after electrochemical cycling showed that 4-mercaptoaniline capped platinum nanoparticles, and their over grafting were chemically and electrochemically stable. Analysis of influence of the number or the n-Pt density of the layers showed that the electrochemically active part of LB electrodes was provided by the last layer plus a part of the underlying one.     

D.s.c. investigation of the states of water in poly(vinyl alcohol-co-itaconic acid) membranes

The state of water in water-swollen poly(vinyl alcohol-co-itaconic acid) membranes, having various water contents from 0.31 to 0.83, was investigated by d.s.c. measurements and compared with those in water-swollen poly(vinyl alcohol) membranes. The amount of freezing water in the membranes was estimated by use of a relationship between the phase transition temperature and the enthalpy of the crystallization of supercooled water. The melting temperature of the water in the membranes immersed in urea and NaCl 0–2 mol l^?1 aqueous solutions was also determined by d.s.c. analysis. The present study proposes a method for estimating the solubilities of urea and NaCl in both of the freezing and the non-freezing water using the melting point depression of the freezing water in the membranes immersed in the solute solution.     

日本水处理混凝剂行业考察

日本在水处理混凝剂研发、生产、管理和应用方面都具有国际先进水平。介绍了日本水处理主宴混凝剂——聚氯化铝（PAC）和硫酸铝（AS）的产业现状，新混凝剂聚硅氯化铁的研发推广工作，水处理药剂标准的制定和管理，以及混凝剂的生产应用效果。文中有详尽的统计资料，可供中国水处理行业参考。     

离子色谱法测定配煤、焦炭和焦油中的氯含量

研究了用带电导检测器的离子色谱对配煤、焦炭和焦油中的Cl- 进行测定的方法。在YSA型8126A-4# 阴离子分离柱上用3.5mmol/LNa2CO3、5.3mmol/LNaHCO3做淋洗液对Cl-进行测定,方法简便快速。Cl-的检出限为2×10-6。该法也适用于F-、NO2-、NO3-、SO42-等的测定。     

二合一石墨合成炉的应用

对石墨合成炉运行中出现的故障进行分析和探讨，并提出一些建议和改进措施，以实现石墨合成炉的稳定运行。     

ABS／PVC共混改性的研究

考察了PVC含量对ABS/PVC共混体系性能的影响。为了进一步提高共混体系的性能，在体系中分别加入CPE、MBS做为第三组分。通过性能比较，发现MBS可有效提高共混体系的综合性能。为了增加共混体系的阻燃性能，加入助阻燃剂Sb2O3，结果表明共混体系的阻燃性能有了很大提高。     

PVC／OMMT／WF纳米复合材料性能研究

对蒙脱土进行有机改性制得有机蒙脱土（OMMT），并制备了聚氯乙烯侑机蒙脱土／木粉（PVC／OMMT／WF）纳米复合材料。采用硅烷偶联剂对木粉表面进行改性，有效提高了聚氯乙烯／木粉（PVC／WF）复合材料的力学性能，其中加入1．5％（质量含量，下同）硅烷偶联剂可使复合材料的冲击强度和拉伸强度分别提高14．8％和18．5％。研究了OMMT的加入对木粉改性前后的PVC／WF复合材料力学性能、耐热性能及阻燃性能的影响，结果表明，木粉未经改性时，OMMT加入无助于PVC／OMMT／WF复合材料力学性能的提高；木粉用硅烷偶联剂改性后，添加少量的OMMT，可使PVC／OMMT／WF复合材料的冲击强度和拉伸强度明显提高。研究表明，添加OMMT可显著延迟复合材料的点燃时间，燃烧残余率也明显增加，OMMT是PVC／WF复合材料的高效阻燃剂。     

一种含壳聚糖的有机硅纺织柔软剂的研制

以三甲胺、环氧氯丙烷、壳聚糖为原料，合成了N-壳聚糖季铵盐；并将其与氨基硅油、三种非离子型表面活性剂、一种有机硅两性表面活性剂进行复配，制成了一种新型有机硅柔软剂。经检测，产品的离心稳定性、酸碱稳定性及阴离子型表面活性剂稳定性较好；经其整理的纯棉白布不仅具有良好的柔软性和吸湿性，而且具有一定的抗茵活性。