Pretreatment and physical activation of acetylene cokes

Pretreatment of acetylene cokes at 450 °C with a mixture of nitrogen, oxygen and water vapour creates a relatively large surface area and some initial microporosity, further developed by water activation at 800 °C. For the same degree of burn-off, but without pretreatment, large micropores (L > 2–3 nm) are obtained and the external surface area remains small.     

Modified Imidazoles: Degradation Inhibitors and Adhesion Promoters for Polyimide Films on Copper Substrates

Polyimide films on copper substrates that are exposed to elevated temperatures and an oxidizing environment will be subject to degradation. In order to halt this degradation without changing the properties of the system, a polymeric agent could be placed between the polyimide and the copper. This paper will investigate three such materials that will not only slow down the degradation of the polyimide and the oxidation of the copper, but will also improve adhesion within the system. Fourier transform infrared reflection-absorption spectroscopy (FTIR-RAS) will be used to investigate the polyimide/polymeric agent/copper system.     

Determination of assimilable organic carbon (aoc) in ozonated water with acinetobacter calcoaceticus

The effect of ozone application in drinking water on the production of assimilable organic carbon (AOC) was evaluated. The typical procedure to determine AOC is suggested by van der Kooij, which is the method of bacterial growth measurement by colony‐forming units using the strain P17 and/or NOX. The bacterial indicator species used for this study is Acinetobacter calcoaceticus which was isolated and identified while ozonating Nakdong river water. This strain could never be isolated from the raw water, but this strain was the predominant isolate in the ozonated water. Within a short incubation time, this organism was found to replicate well on acetate and oxalate as the sole carbon sources. The yield coefficients of this organism for acetate and oxalate are the same order of magnitude as the value of P17 and NOX. With full‐scale experiments, A. calcoaceticus concentration was found to increase after ozonation, but did not decrease upon chlorination. In laboratory‐scale experiments with Yongsan river water, aldehyes were found to be produced in proportion to the ozone dose. The raw water contains low concentrations of aldehydes, but has a high AOC concentration. A correlation between aldehyde production and AOC production was observed in the tested water with ozonation.     

A FT-IR assessment of iso-C4H8 reactivity with V2O5/TiO2 catalysts

Low-loaded vanadia-titania catalysts have been prepared by impregnation of titania P-25 (Degussa). The catalysts were characterized by X-ray diffraction, specific surface area and porosity assessment by nitrogen adsorption at 77 K. For very low vanadia contents the absence of surface acid Brønsted sites leads to dimerization on surface acid Lewis sites, whereas the presence of surface acid Bransted sites when the vanadia content is increased leads to oxidation to carbonyl and carboxylate species.     

Some kinetic aspects of unsteady-state partial oxidation reactions. Dynamic processes on metal oxide surfaces

It is shown that steady-state kinetic data do not allow the discrimination between the redox and associated mechanisms of the partial oxidation reactions. A discrimination between these mechanisms was performed using transient experiments. The obtained rate expressions are in agreement with experimental kinetic data for catalytic partial oxidation of o-xylene.

An influence of the conjugate oxidation of a catalyst surface on dynamics and kinetics of the heterogeneous catalytic oxidative reactions is considered. Computing simulation of methane oxidative coupling of methane reaction at lowered temperature and elevated pressure has been performed. It showed that the reaction order with respect to oxygen exceeding unity is consistent with the chain branching mechanism of the reaction in the presence of TiSi₂ and TiB₂ and showed the important role of the branching chain cycles in the low-temperature OCM reaction at elevated pressure.     

氧化铝丝的研制

氧化铅丝生产过程中最关键的工艺是连续阳极氧化。氧化膜击穿电压决定于氧化膜厚度。控制膜厚度的三要素为:电解液(成份、浓度及温度),槽电压和铝丝走速。     

Effect of maillard reaction volatile products on lipid oxidation

Maillard reaction volatile compounds (MRV), prepared by heating a glucose-glycine solution, were tested as antioxidants in soybean oil (SBO) thermoxidation. The volatiles were transferred into the oil by stripping with a stream of Nitrogen and substituting the atmosphere above the oil with air containing MRV. Standard accelerated oxidation was performed by heating the SBO. Peroxide value measurement and headspace gas Chromatographic analysis were carried out on all the samples. The MRV antioxidant activity was evaluated by determining the effect of the induction period and the kinetic rate constant of peroxide and oxidation volatiles formation. The MRV showed a significant antioxidant activity. The effectiveness was variable depending on MRV transfer method to the oil, and the Maillard reaction extent was related to the browning level of glucose/glycine solution. It was found that the maximum effect of MRV prolonged about three times the induction period and reduced the kinetic rate constant by half in relation to the control sample. MRV affects oxidative stability of soybean oil by lengthening the induction period as well as by decreasing the rate of oxidation at the propagation state and reducing the formation of hexanal.     

Technique for Producing Mullite and Other Mixed-Oxide Systems

Mixed-oxide systems are of interest in a variety of technical ceramic applications. The key in many systems is to achieve a high degree of homogeneity, approaching the molecular level. A technique for producing mixed oxides via direct oxidation of mixtures of organometallic compounds is discussed as a potential route. Preliminary work performed on producing mullite is discussed.     

Selective partial oxidation of light paraffins with hydrogen peroxide on thin-layer supported Nafion-H catalysts

Thin-layer carbon supported Nafion-H catalysts were found to be active and highly selective (S>98%) for the partial oxidation of C₁-C₃ alkanes, in a three phase catalytic membrane reactor (3PCMR), under mild conditions and in the presence of H₂O₂. The influences of the catalyst teflon loading and H₂O₂ concentration on the reaction rate have been evaluated. A reaction pathway, based on the electrophilic hydroxylation of the C-H bond of alkanes with protonated hydrogen peroxide (H₃O ₂ ⁺ ), is discussed.     

Yttrium sol–gel coating effects on the cyclic oxidation behaviour of 304 stainless steel

The present results reveal the interest of sol–gel coating technique to improve 304 steel high temperature oxidation resistance. An yttrium sol–gel coating appears to enhance the oxidation resistance during isothermal oxidation test, to decrease widely the oxide weight gain and to reduce the initial transient oxidation stage generally observed in the case of blank steels. Moreover, the experimental results confirm that yttrium sol–gel coating also plays a significant role on the cyclic oxidation behaviour of the 304 steel. In fact, the yttrium addition promotes remarkably the prolongation of the period during which the oxide scale still remains adherent to the substrate.