NO removal by CH4 on Co-NaX-CO and Ag-NaX catalysts in a dual-bed system

NO removal using CH₄ as a reductant in a dual-bed system has been investigated with Co-NaX and Ag-NaX catalysts, which were prepared by Co²⁺-, Ag⁺-ion exchange into zeolite NaX, respectively, and activation for 5 h at 500 °C. The experimental result has been compared with that of a Co-NaX-CO catalyst, additionally pre-treated under CO flow for the Co-NaX catalyst. The cobalt crystal structure of a Co-NaX-CO catalyst is Co₃O₄, which promotes NO oxidation to NO₂ by excess O₂ at a low temperature (523 K). The mechanical mixture of Co-NaX-CO and Ag-NaX catalysts shows a synergy effect on NO reduction to N₂ by CH₄ in the presence of excess O₂ and H₂O, but the NO reduction decreases quickly as time passes. However, the NO reduction to N₂ in a deNO bed at 523 K and a deNO₂ bed at 423 K, which are relatively lower than the reaction temperatures for common SCR systems, still remained at 67% even in a H₂O 10% gas mixture after 160 min.     

[Bmim][PF6]高效吸收二氯甲烷及流程模拟

采用智能重量吸附仪测量了不同温度、压力下二氯甲烷(CH2Cl2)在离子液体1-丁基-3-甲基咪唑六氟磷酸盐([Bmim][PF6])中的溶解度,用NRTL方程建立了离子液体?二氯甲烷体系的气液平衡模型,拟合得到二元交互作用参数,计算所得的二氯甲烷溶解度与实验数据吻合良好,平均相对误差为3.16%. 构建了离子液体处理含二氯甲烷尾气及资源回收利用的常压吸收?减压闪蒸解吸工艺和模型,模型适用范围为温度278.15~308.15 K,压力0~0.1 MPa. 对吸收塔进行了模拟和灵敏度分析,获得了常温常压吸收条件下的最佳操作工艺参数.     

基于二阶矩封闭湍流模型的非预混湍流火焰的数值模拟

Turbulent nonpremixed CH4/H2 flame has been simulated using several typical differential secondmoment turbulence closure (SMTC) models. To clarify the applicability of the various models, the LRR-IP model,JM model, SSG model as well as two modified LRR-IP models were tested. Some of above-mentioned SMTC models cannot provide the overall satisfactory predictions of this challenging case. It is confirmed again that the standard LRR-IP model considerably overpredict the centerline velocity decay rate, and therefore performs not well. Also it is interesting to observe that the JM model does not perform well in this challenging test case, although it has already been proved successful in other cases. The SSG model produces quite satisfactory prediction and performs equally well or better than the two modified LRR-IP models in the reacting case. It can be concluded that the modified LRR-IP models as well as the SSG model are superior to the other SMTC models in the turbulent nonpremixed CH4/H2 flame.     

Cl+CH3CN→CH2CN+HCl的动力学研究

采用Gaussian 98从头算程序包，从理论上对乙腈与氯原子的夺氢反应的动力学进行了研究。在UB3LYP／6—311G（d，p）水平下优化了反应物、产物和过渡态的几何结构，用UMP4（SITFQ）方法进行了单点能校正，并计算出它们的谐振频率和反应在温度区问250～750K的速率常数。     

铁离子改性碳分子筛对氮气/甲烷分离性能的研究

针对碳分子筛对氮气/甲烷分离体系分离比低的问题,采用浸渍法以市售空分碳分子筛（CMS）为基体,制备了分离氮气/甲烷的铁离子改性碳分子筛。通过静态吸附量、分离比、吸附动力学及热力学性质考察了铁离子负载量对碳分子筛吸附分离氮气/甲烷性能的影响。结果表明：铁（Ⅲ）的负载减小了CMS的比表面积、微孔体积和孔径,使CMS超微孔的孔径分布呈现更集中的趋势。这种集中性以动力学性能下降为代价,明显提高了碳分子筛对氮气/甲烷的吸附分离比。在303 K、0.7 MPa条件下,综合性能优异的0.3%铁改性CMS具有6.03的氮气/甲烷吸附分离比。     

分时差分式光纤甲烷气体检测仪的研制

基于甲烷气体的吸收光谱特性，研制了一种用低廉LED作光源的新型分时差分式光纤甲烷气体检测仪。光源LED自动实行交替斩波，波长切换机构的灵巧设计可以用单光路实现差分吸收浓度检测，消除了双光路的差异。理论和实验表明，该结构既可以简化设计，又可有效抑制信号检测与传输中的同性干扰。     

基于USB HOST的便携式环境参数监测仪的设计

提出一种新型环境参数监测仪,基于USB HOST技术设计,嵌入式USB主机系统采用SM5964单片机加上USB主从芯片CH375的结构,实现USB1.1主机协议和USB mass storage类,从而通过对U盘的各种操作将采集到的环境参数(声音响度、温度)存入U盘,以其为媒介向上位机完成数据反馈。应用实践证明,该仪器广泛适用于居民小区、交通要道等不同环境下,且简易便携,有较好的市场前景。     

Irradiation embrittlement monitoring of WWER-440/213 TYPE RPVs

In the paper the main goals and progress of the surveillance specimen programme for the RPVs WWER-440/213 in Jaslovské Bohunice V-2 and Mochovce NPPs are presented. At Jaslovské Bohunice V-2, the standard surveillance specimen programme (SSSP) was finished and so-called ‘Extended Surveillance Specimen Programme’ (ESSP) was prepared on the base of its critical analysis. For first two units of the Mochovce NPP completely new programmes of irradiation embrittlement monitoring called ‘Modern Surveillance Specimen Programme’ is prepared. It is based on the experience with SSSP and ESSP as well as the recommendations of IAEA experts. This programme will serve for Mochovce NPP during all planned service life. The experience of ESSP application on the 3rd and 4th units in Jaslovské Bohunice V-2 NPP are presented in the paper too.     

催化燃烧型甲烷传感器的研究

在分析传统催化燃烧型甲烷传感器的基础上，实验验证了催化燃烧原理，并设计了基于脉冲式恒温供电技术和闭环反馈系统的恒温检测桥路。通过实验得到了良好的效果。     

Sensing characterization of Sn/In/Ti nanocomplex oxides for CO,CH<Subscript>4</Subscript> and NO<Subscript>2</Subscript>

The nanocomplex oxides of Sn-In and Sn-In-Ti were prepared by controlled co-precipitation method as sensing materials of semiconductor gas sensors for detection of CO, CH4 and NO2. Through manipulating the Sn/In cation ratio, metal salt total concentration, precipitation pH value and aging time, the nanocrystalline powders were successfully derived with chemical homogeneity and superior thermal stability, compared with the single component oxides. The particle size and morphology, surface area, and thermal and phase stabilities were characterized using TEM, TG-DTA, BET and XRD. The sensing tests showed that the Sn-In composites exhibit high sensitivity and selectivity for CO and NO2. The introduction of TiO2 enhanced CH4 sensitivity and selectivity, particularly, additives of Pd and Al2O3 as a dopant and surface modification greatly enhanced the sensing properties. The sensitivity depended on the composition of composites, calcination temperature and operating temperature. The optimal values were (25%In2O3- 75%SnO2)-20%TiO2 for ternary composite, 600 and 300℃, respectively. Temperature-programmed desorption (TPD) studies were employed to explain the gas adsorption behavior displayed by the surface of nanocomposites and X-ray photoelectron spectroscopic (XPS) analysis was used to confirm the electronic interactions existing between oxide components. The sensing mechanism of the nanocomposites was attributed to chemical and electronic synergistic effects.