米糠-硫酸直接浸锰工艺条件研究

以米糠及湘西软锰矿为原料,对米糠-硫酸直接浸锰制备硫酸锰的工艺条件进行了研究。结果表明,米糠-硫酸法浸锰的最佳工艺条件为:浸锰温度250℃,硫酸质量分数50%,浸锰时间75min,米糠用量为软锰矿粉质量的20%,硫酸用量为其理论用量的110%。按该工艺条件浸锰,锰的浸出率可达95%以上。该工艺具有能耗少、生产成本低、锰的浸出率高等优点,为软锰矿的开发利用开辟了一条新途径。     

Interactions between Cytochrome c and DNA Strands Self-Assembled at Gold Electrode

In this work, we reported the investigation on the interaction between DNA strands self-assembled at gold electrodes and an electron transfer protein, cytochrome c. We observed that cytochrome c exhibited well-defined electrochemistry in both double-stranded and single-stranded DNA films. This suggested that the electron transfer reaction of cytochrome c arose possibly due to the electron hopping along DNA strands rather than wiring along the double helix. We also compared the heterogeneous electron transfer rate of cytochrome c with that of a ruthenium complex, which further confirmed this mechanism.     

极限训练机在矿山开采最大下沉值估算中的应用

矿山开采过程中采空区地表往往会发生形变,研究其最大下沉值对安全生产具有重要意义,现有的开采最大下沉估算方法还有提升的空间。基于岩移数据决策与极限训练机(Extreme learning machine,ELM)算法,提出了一种估计最大下沉的新方法。该方法将采厚、倾角、平均采深、走向长度、倾向长度和覆岩岩性确定为最大下沉值影响因素;应用以Sigmoid方程为核函数、隐含层神经元个数为114的ELM模型对最大下沉值进行了估算。通过案例分析,ELM模型得到了优于传统算法如CHAID、Boosted Tree、ANN、BPNN和SVM的RMSE、MAE、MAPE、最大残差及秩相关系数,故认为该模型是一种有效的矿山开采最大下沉估算方法。     

二氧化硫浸锰制备高纯碳酸锰

采用湘潭低品位的贫软锰矿为原料，对二氧化硫气体湿法浸锰、浸出液除杂、碳化结晶制备高纯碳酸锰的工艺进行了研究。实验得到二氧化硫浸锰的最佳工艺条件为：浸锰温度150～155℃，液固质量比3：1，二氧化硫体积分数6％～7％、流速1．5～2．0mL／min，浸锰时间3．0～3．5h。按该条件浸锰，锰的浸出率可达95％以上。该工艺为贫软锰矿的开发利用及有色金属冶炼厂二氧化硫废气的综合治理开辟了一条新途径。     

贵州省磷化工现状及发展前景

阐述贵州磷资源、煤炭、电力基本情况及在全国的地位和我省发展磷化工的重要意义。介绍我省磷化工生产现状、生产能力、实际产量、产品出口等情况。对世界磷化工产品市场需求，我国和我省的磷化工到2000年的发展情况，达到的目标进行初步援测和构想，并对我省磷化工发展对策进行探讨，提出几点建设性意见。     

An electrochemical study of the dissolution of gold in thiosulfate solutions. Part II. Effect of Copper

Thiosulfate has been considered as one of the most promising of the non-toxic alternatives to cyanide for the leaching of gold and much work has been carried out with the aim of understanding and improving the ammoniacal thiosulfate leaching process. In particular the behaviour of gold in thiosulfate solutions containing copper in the absence of ammonia has received little attention. It has been shown in this study involving electrochemical and leaching tests that copper ions catalyze not only the oxidation of thiosulfate but also the dissolution of gold in alkaline thiosulfate solutions. Electrochemical studies have shown that copper has a positive effect on the anodic dissolution of gold with increasing concentrations of copper resulting in higher dissolution rates of gold at a potential of 0.3V. Studies on the dissolution of gold powder in alkaline oxygenated thiosulfate solutions containing low concentrations of copper have shown that the role of copper in enhancing the dissolution rate of gold is possibly associated with the formation of a copper–thiosulfate–oxygen intermediate which is more reactive in terms of cathodic reduction than dissolved oxygen. The electrochemical experiments have been complemented by a leaching study which has shown that milling of gold powder in the presence of copper (added as ions, metal, or oxide) assists with the dissolution of gold in thiosulfate solutions.     

Exploration of mesoporous structure of tunisian raw and acid-leached phosphate ore particles

Rock phosphate fractions were examined for their porous structure by nitrogen adsorption. The pore size distribution and the shape of pores does not seem to depend on the particle size. The specific surface area values present two regions, one above and one below that of the particles with 125 μrn diameter. Particles of a given size were leached with dilute phosphoric acid (1.5 mass% P₂O₅) at 25°C. It was observed that there is a widening of the initial pores during leaching. The particles collected at the initial period of the reaction are pitted and those collected at the final period are disintegrated.     

铜及其合金电解仿金着色工艺

详细介绍了一种铜及铜合金阴极还原着仿金色工艺及其配方。探讨了该工艺的着色原理、电流密度的影响及所得着色膜层的性能。结果表明，该工艺所得的膜层呈金黄色，结晶致密，耐蚀性好。     

Chemical Reaction Engineering and Research and development of gas solid systems

A general procedure is proposed for innovative research and development of gas-solid reactor systems, with a brief explanation of the significance of each step in the procedureBased upon the contacting mode between gas and solid phases, as well as the ways of supplying thermal energy to the reacting regions, various types of gas-solid reactor systems are classified by using tables of so called “matrix” form, for thermal cracking and gasification of heavy oils, gasification of coal, gasification of solid waste, calcination of limestone, clinkering of cement and reduction of iron ore.The importance of fundamental concepts is emphasized for successful research and development by presenting several examples; namely, calcination of limestone, thermal cracking of heavy oils and gasification of solid waste materials.In connection with the direction in which fundamental research should be oriented, four primary ways of thinking are proposed, which can be applied to obtain innovative ideas for further research and development in this field.One example of the author's practical experience was selected to show the role of the fundamental research in the course of large scale development. Finally the author outlines the role of chemical reaction engineering to innovate the novel gas-solid reactor systems which may be inevitable for simultaneous solution of the three big E's; namely, Energy, Environment and Economy.     

自含砷合碳难处理金矿中提取金的研究─Ⅰ.氨水脱砷-石灰加压氧化-氰化

针对甘肃省坪定金矿含金、砷高、金部分地赋存于脉石、脉石为碱性、属于难选难冶矿的特点，提出了氨水脱砷－石灰加压氧化－氰化新工艺．当原矿含金8．7g／t及13．0％砷时，砷可脱除95％，金可浸出85％．技术及经济指标预计均较满意．