用电生的Fe(Ⅱ)-EDTA络合物在Fe(Ⅲ)-EDTA-ClCH2COOH-NaOAc缓冲溶液中精密库仑滴定金

提出了在Fe(Ⅲ)-EDTA—ClCH2COOH—NaOAc缓冲溶液中利用电生Fe(Ⅱ)-ED-TA络合物精密库仑滴定Au的方法。采用电位法检测终点，测定范围在5．2～17．0mg Au时，相对平均误差和标准偏差≤0．03％。方法可用于纯金、金合金和首饰等材料中Au含量的精密分析，选择性很好。讨论了电生Fe(Ⅱ)-EDTA络合物作库仑滴定剂的理论基础，获得了有益的结论。     

Effects of gold plating on the resistance to high temperature discoloration of the cavity for ceramic packages

The effects of thickness and types of gold plating on the resistance to high temperature discoloration of gold plating on cavity surface of ceramic package were investigated. It was found that the thicker gold plating, the less discoloration degree for ceramic packages. Non-cyanide gold plating performed better resistance to high-temperature aging than cyanide gold plating. The relationship between the gold plating thickness and the amount of diffused Ni to the gold plating of ceramic packages with Au/Ni and Au/Ni-Co platings after heating at 420℃for 15 min was also studied. When the gold plating thickness reach 2.0 μm and 1.6 μm for Au/Ni and Au/Ni-Co plating systems, respectively, no discoloration was observed on the gold plating surface of cavity, and the corresponding diffused Ni amounts (mass fraction) are 1.0% and 0.4%, while the diffused Co to the gold plating is 0.04%.     

电场作用对提高微生物浸矿性能的影响

在排土场微生物强化浸出过程中,结合电场生物工程技术,以氧化亚铁硫杆菌为研究对象,提出利用电场作用提高微生物浸矿性能的方法,探讨电场作用对微生物生长代谢以及渗流特性的影响。结果表明：电场作用对氧化亚铁硫杆菌生长代谢的影响非常明显,适当的电场可有效强化其生长代谢能力,过高的电流会抑制氧化亚铁硫杆菌生长;电场作用下,排土场孔隙中微生物的渗流能力明显增强,微生物电动渗流效应在渗透率高排土场中尤为明显。     

晋东北金矿床石英流体包裹体与找矿

晋东北各种类型金矿中都广泛发育热液型石英脉，与矿化有关的石英流体包裹体的特征反映了不同的矿床类型。对该区石英脉型、蚀变岩型及磁铁石英岩型金矿床的研究表明，石英中流体包裹体的成分、温度和红外吸收光谱等特征可以作为划分矿床类型和作为金矿找矿评价的标志     

Gold leaching with elemental sulfur in alkaline solutions under oxygen pressure

1　ＩＮＴＲＯＤＵＣＴＩＯＮＣｙａｎｉｄａｔｉｏｎｐｒｏｃｅｓｓ ,ｃｈａｒａｃｔｅｒｉｚｅｄｂｙｅｆｆｅｃｔｉｖｅｎｅｓｓａｎｄｌｏｗｏｐｅｒａｔｉｎｇｃｏｓｔ,ａｓａｃｏｎｖｅｎｔｉｏｎａｌｔｅｃｈｎｏｌｏｇｙｆｏｒｇｏｌｄｅｘｔｒａｃｔｉｏｎｆｒｏｍｏｒｅｓ ,ｈａｓｂｅｅｎｕｓｅｄｉｎｉｎｄｕｓｔｒｙｆｏｒｏｖｅｒ 10 0ｙｅａｒｓ .Ｈｏｗｅｖｅｒｔｈｅｃｙａｎｉｄｅｉｓａｈｉｇｈｌｙｔｏｘｉｃｃｈｅｍｉｃａｌ,ａｎｄｃｏｍｍｅｒｃｉａｌｃｙａｎｉｄａｔｉｏｎｐｒｏｃｅｓｓｉｓｌｉｍｉｔｅｄｉｎｔ…     

乐红铅锌矿床综合找矿模型的建立及重要性

通过对云南乐红铅锌矿已知矿床的地质、地球物理、地球化学特征的研究,构建了地质—地球物理—地球化学的综合找矿模型。该模型的建立,对Pb、Zn金属成矿带预测、地球物理、地球化学异常评价及解释具有重要的意义,并能较好地指导区域找矿及勘查工作。     

Bioleaching of refractory gold ore （ Ⅲ ）——Fluid leaching Jinya refractory gold concentrate by Thiobacillus ferrooxidans

A novel fluidized-bed reactor was designed and installed for bloleaching in a semi-continuous way, by which a process for biuleaching-cyanidation of Jinya refractory gold arsenical concentrate was studied. The arsenic extraction rate reaches 82.5 % after 4-day batch biooxidation of the concentrate under the optimized condition of pH 2.0, ferric ion concentration 6.Sg/L and pulp concentration 10%. And leached rate of gold in the following cyanida.tion is over 90%. The parameters of three series fluidized-bed reactors exhibit stability during the semi-continuous bioleaching of the concentrate.Armmic in the concentrate can be got rid of 91% after 6-day leaching. Even after 4 days, 82% of arsenic extraction rate was still obtained. The recovery rates of gold are 92 % and 87.5 % respectively in cyaniding the above bioleached residues.The results will provide a base for further commercial production of gold development.     

铜基仿金合金

为了寻找金的代用品,长期以来研究者竞相研制铜基仿金合金以满足制造较大的金色艺术品。文中阐述了研制铜基仿金合金的原理及其金色度和抗变色性的测试方法,分别叙述了铝、锌、锡、铟、硅、镍、稀土等元素对合金金色度和抗变色性的影响。鉴于各研究者得出的合金化学成分相差极大,最后提供了较为合理的铜基仿金合金的化学成分。     

无氰电刷镀金技术在航天工业中的应用

应用FJY-18无氰电刷镀金技术制得的金镀层具有孔隙率低、色泽金黄、光亮、结合力好,镀厚能力大于20μm,显微硬度HV=130～150,施工温度范围宽、无毒等特点,该技术已用于航天工业中某一关键部件的表面减磨密封镀金.     

Manufacturing processes of Atlantic Bronze Age annular gold ornaments—A case study of the Guînes gold hard (Pas-de-Calais,France)

ABSTRACT

The gold work from the Western European Middle and Late Bronze Age (about 1500–700 BC) is characterized by solid ornaments and vessels. This article deals with manufacturing techniques of heavy gold jewelry by presenting a gold hoard found at Guînes, Pas-de-Calais, in Northern France, as a case study. In particular, three ornament types will be taken into consideration: (1) solid penannular neck and arm-rings, plain or with linear or geometric decoration; (2) flange-twisted ornaments that appear in different dimensions, as small as ear rings, as neck rings, up to the large size of a belt; (3) complex, composite ornaments. The technological aspects dealt with in this precious metal working context are manifold, including ingot and lost wax casting, hammering and bending of solid rods, the production of flange-twisted rods, chasing as decoration method, and finally joining techniques such as soldering, riveting and folding, and creasing.