转炉入炉铁水温度低的原因分析及其对炼钢的影响

系统分析了新钢公司一钢厂转炉入炉铁水温度低的原因及铁水温度对炼钢的影响，提出了提高铁水温度的措施及转炉应对低温铁水的办法。     

A branch-and-price algorithm to solve the molten iron allocation problem in iron and steel industry

The molten iron allocation problem (MIAP) is to allocate molten iron from blast furnaces to steel-making furnaces. The allocation needs to observe the release times of the molten iron defined by the draining plan of the blast furnaces and the transport time between the iron-making and steel-making stages. Time window constraints for processing the molten iron must be satisfied to avoid freezing. The objective is to find a schedule with minimum total weighted completion time. This objective reflects the practical consideration of improving steel-making efficiency and reducing operation cost caused by the need for reheating. Such a problem can be viewed as a parallel machine scheduling problem with time windows which is known to be NP-hard. In this paper, we first formulate the molten iron allocation problem as an integer programming model and then reformulate it as a set partitioning model by applying the Dantzig–Wolfe decomposition. We solve the problem using a column generation-based branch-and-price algorithm. Since the subproblem of column generation is still NP-hard, we propose a state-space relaxation-based dynamic programming algorithm for the subproblem. Computational experiments demonstrate that the proposed algorithm is capable of solving problems with up to 100 jobs to optimality within a reasonable computation time.     

干磨干选工艺在赤城选矿厂中的应用

赤城鑫宇选矿厂工艺流程设计中采用了干磨干选的新工艺，用来处理全铁品位为13％左右的原矿。该工艺中将原矿用干式棒磨机磨至4mm～0mm，然后进行干式磁选甩尾，甩尾产率达到36％，甩尾后原矿TFe位可达到18％，提高了入湿磨、选别的品位，有效地降低了下段磨矿的费用。该工艺投入运行后，生产情况良好。     

电熨斗底板水溶性聚四氟乙稀真空静电喷涂工艺

介绍了电熨斗底板真空静电喷涂的工作原理。说明了电晕放电在底板真空静电喷涂中的作用。分析了氟涂料微粒的带电过程及影响因素。这个工艺对产品质量提高的作用进行了分析。     

化学模式识别法在钢铁工业中的若干应用

本文涉及一种崭新的非函数数据处理法及其在工业诊断和优化中的应用。并对其进行要因分析和优化决策的原理作了介绍。结合钢铁工业生产中的实例进行了分析。还探讨了该方法在钢铁工业中应用的意义。     

抽油机球铁齿轮的化学成分及生产工艺

为提高抽油机减速器齿轮铸件的机械性能，提出以Sn代替Mo作为合金元素，并通过试验确定了合理的Si、Cu、Sn的加入量。指出Si加入量应控制在1．9％－2．1％范围内，同时加入0．36％～0．9％的Cu和0．025％～0．07％的Sn，可保证球铁的强度和延伸率都满足QT700－2的要求。鉴于试件与实际铸件的表面硬度有一定的差值，为提高铸件表面硬度，进行了余热正火试验，并给出了铸件在铸型内的时间－冷却温度曲线。最后根据球铁化学成分的选择结果，进行了齿轮生产试验。     

大型离心复合球墨铸铁轧辊的生产

简述了我公司为舞阳铜厂试制４２００ｍｍ厚板轧机离心复合球墨铸铁轧辊的性能要求、内外层双重金属铸造工艺参数的选择及整个铸造生产工艺过程。     

Benzylation of thiophene using zinc and iron chloride modified montmorillinite clay

Montmorillinite clays, modified with either Zn(II) or Fe(III) chlorides have been used to catalyze the Friedel-Crafts alkylation of thiophene. High yields (ca. 80%) of 2- and 3-benzylthiophene mixtures were obtained using either catalyst in chlorobenzene or nitrobenzene solvent at 80°C. The ratio of 2–3-products was found to be controlled by their relative stability. Reactions were most rapid in nitrobenzene solution (<5 min) and resulted in formation of the 2-isomer as the only mono-substituted product. This is believed to be the first example in which an alkylation of thiophene has been limited to one regio-isomer.     

New Ferro Powder for Selective Laser Sintering of Dense Parts

The paper describes a new powder composition specially developed for selective laser sintering (SLS). The aim is to obtain a ferro powder that can be sintered without need for a (sacrificial) polymer binder and that results in quasi dense parts that do not need any post-processing like furnace sintering, infiltration or HIP. The powder is a mixture of different types of particles (Fe, Cu, Ni and Fe₃P). The composition and mixture ratio are justified by using phase diagrams. The powder has been tested using an own developed Nd: YAG SLS machine. The influence of process parameters (laser power, scan velocity, scan spacing and scan strategy) and the microstructural characteristics have been investigated. Attention is devoted to the binding mechanism (liquid phase sintering, through melting) and to the quality of resulting parts (density, balling effect,…).     

Colour extension properties of individual pigments and effects on shades of foundations in cake form

The mechanism of colour change during the pigment dispersion process and during powder application to the skin surface was studied by examining the colour extension properties of Yellow. Red , and Black iron oxides in white powder bases. A new measure for the evaluation of the degree of colour extension was devised. This measure corresponded well with human visual sensation, and was found to be useful for comparing the rates of colour extension of pigments. The rate of colour extension of pigments was found to vary in the order: Yellow acicular Red granular Red Black. This result explains colour darkening and the change towards reddish tones during the pigment dispersion process, because Yellow extends fully in the early stage of the process but Red , especially in granular form, and Black continue to extend even in the later stage. Acicular Red iron oxide is more favourably employed than the granular form to attain sufficient colour extension of foundations with lower energy expenditure, and to decrease the discrepancy between the cake colour and the colour of applied powder.
Le développement des oxydes de fer et effet sur les nuances des fonds de teint compacts