新型蓝绿发光材料ZnSe／BeTe超晶格的能带剪裁

由于器件的快速退化，101.5小时似乎成了Znse基蓝绿色半导体激光器难于逾越的寿命极限。分析退化机制，发现在强电流注入的半导体激光器中，热退化具有重要影响。研究表明，用作载流子限制层的宽带Ⅱ-Ⅵ族四元合金（如ZnMgSSe）只能对ZnSe中的电子有效地限制，无法对空穴很好地限制;而对BeTe，却只能对空穴进行有效的限制，无法对电子很好地限制。这导致ZnSe（或BeTe）活性层空穴（或电子）漏电发热，引起退化。本文提出以ZnSe／BeTe超晶格为蓝绿发光层，并用包络函数理论具体计算了阱宽、垒宽对载流子能级的不同影响，考察了ZnSe、BeTe厚度比和超晶格周期对带隙、载流子限制能力的调节。为研制新型长寿命蓝绿色半导体激光器提供了一条新的途径。     

强化乙烯生产管理提升企业竞争能力

回顾了中国石油天然气股份公司所属乙烯装置2002年的生产情况，总结了乙烯生产管理中取得的经验和存在的问题，并提出了今后乙烯生产管理的目标。     

环氧乙烷合成乙二醇的研究进展

介绍了环氧乙烷合成乙二醇的主要生产方法，包括以壳牌、联碳化学公司以及Halcon—SD公司为代表的环氧乙烷直接水合法，环氧乙烷催化水合法和碳酸乙烯酯法，后两种乙二醇生产方法是目前国内外研究开发的热点。催化剂体系是催化水合法工艺的关键，重点介绍了国内外各主要公司对催化剂体系的研究进展及使用效果；碳酸乙烯酯法分为乙二醇和碳酸二甲酯联产法以及碳酸乙烯酯水解法，详细介绍了国内外各主要公司对该技术的研究进展，包括工艺流程、催化剂体系等方面。将3种乙二醇生产方法进行技术经济比较，结果表明，催化水合法和碳酸乙烯酯法在原料消耗和能耗方面占优势。并对我国乙二醇生产工艺技术提出建议。     

用热失重法确定水合粘土水分含量及存在形式

文章以蒙脱土为例，采用热失重法定性定量确定了水合粘土中结合水类型、界限及其相对含量，并与等温吸附法结果进行了对比。结果表明，用该方法得到的水合蒙脱土中各种水分的相对含量及总含水量与等温吸附实验结果相一致。热失重（25~250 ℃）分析结果表明，水合蒙脱土中水分子主要存在自由水、松散吸附结合水、紧密吸附水（强吸附结合水）3种状态，分别对应于25~75 ℃、75~120 ℃、120~230 ℃区间里的失水。从热失重（25~250 ℃）规律来看，仍存在两个明显的转折点p/ps=0.9、0.98，它们为粘土-水体系的两个特征湿度，前者为粘土表面强结合水与松散结合水（渗透结合水）之间的界限，后者为松散结合水与自由水之间的界限，这验证了等温吸附法确定的两个特征湿度及对粘土表面结合水界限划分的正确性。     

模块化蓝光光存储性能静态测试系统

蓝光光存储是信息存储领域发展的一个重要方向。测试系统是研究蓝光光存储材料的必备条件，为建立蓝光光存储研究平台，设计和搭建了一套模块化蓝光光存储性能静态测试系统。激光工作波长为406．7nm。系统采用调制解调技术降低系统噪声，提高测量粘度：采用光点移动模式降低对样品尺寸的要求；采用纳米平台提高记录点的反复定位性能。实验结果证明测试系统性能良好，可以满足蓝光光存储性能静态测试要求。     

The effect of support morphology on the reaction of oxidative dehydrogenation of ethane to ethylene at short contact times

The oxidative dehydrogenation of ethane is carried out in short contact time reactors over Pt and LaMnO₃ based catalysts supported on a large number of different ceramic substrates (45, 60 and 80 ppi foam monoliths and 200, 400, 600, 900 and 1200 cpsi honeycomb monoliths). Experimental results, obtained under the same conditions at varying the C₂H₆/O₂ ratio, showed that the highest performance in terms of ethylene selectivity and yield is always attained on LaMnO₃ catalysts. Furthermore, the results are significantly influenced by the morphology and cell density of the support, with 45 and 60 ppi foams and 400 and 600 cpsi honeycombs giving the best performance. The experimental results are explained by means of geometrical and fluid dynamic considerations on the support, and by means of a 2D mathematical model, which clearly indicates an optimal intermediate cell density for maximising ethylene selectivity and yield.     

聚氧乙烯化大豆油脚硫酸钠的合成

以大豆油脚为原料,经聚氧乙烯化、硫酸化合成出一种新型的表面活性剂。     

稀土镧、钇对蓝色氧化钨氢还原的影响

借助于ＳＥＭ、Ｘ射线衍射技术及ＩＰＰ粉末粒度仪等系统地研究了稀土镧、钇对蓝色氧化钨（ＢＯ）氢还原的影响。结果表明：稀土元素镧、钇在蓝色氧化钨的还原钨粉中以氧化物及钨酸盐形式存在；还原后所得的钨粉颗粒大多为规则形状的多面体；稀土镧、钇和铝相似，强烈地抑制ＢＯ氢还原钨粉颗粒的长大，而且钇的作用更为显著。     

Nile blue adsorbed onto silica gel modified with niobium oxide for electrocatalytic oxidation of NADH

A study of modified carbon paste electrode employing Nile blue (NB) adsorbed on silica gel modified with niobium oxide (SN) for electrocatalytic oxidation of reduced nicotinamide adenine dinucleotide (NADH) is described. The adsorbed organic dye on SN was used to prepare a modified carbon paste electrode to investigate its electrochemical properties. The formal potential (E°′) of the adsorbed NB (−230 mV vs. saturated calomel electrode, SCE) showed a shift of 70 mV towards a more positive potential value, compared to NB dissolved in aqueous solution. In solutions with pH between 6.0 and 8.0 did stability and E°′ remained almost constant. However, for a solution pH lower than 6.0 the E°′ was affected by the acidity of the contacting solution, shifting the E°′ towards more positive values. For the solution pHs between 6.0 and 8.0 the electrocatalytic activity remained almost constant. A linear response range for NADH between 1.0×10⁻⁵ and 5.2×10⁻⁴ mol l⁻¹, at pH 7.0, was observed for the electrode, with an applied potential of −200 mV versus SCE. The formation of an intermediate charge transfer (CT) complex was proposed to the CT reaction between NADH and adsorbed NB. The heterogeneous electron transfer rate, k_obs, was 1400 M⁻¹ s⁻¹ and the apparent Michaelis-Menten constant, was 0.21 mM at pH 7.0 evaluated from rotating disk electrode (RDE) experiments with an electrode coverage of about 5.2×10⁻⁹ mol cm⁻². The increase in the reaction rate between NADH and the immobilized NB compared to those obtained with dissolved NB was assigned to the shift of the E°′ towards more positive values.     

DIRECT OXIDATION OF ETHYLENE TO ACETALDEHYDE IN A HOLLOW FIBER MEMBRANE REACTOR†

A hollow fiber membrane reactor, which resembles a tube-and-shell heat exchanger, was developed for homogeneous catalytic reactions with gas reactants and products. The gas stream flows through the tube side while the reaction takes place in the catalyst solution which fills the shell side. The separation load of product from the catalyst solution can be reduced by using a hollow fiber membrane reactor instead of a conventional bubble column reactor. The reactor operates in a plug-flow pattern with a large mass transfer area per unit volume of catalyst solution

This concept was investigated experimentally using the direct oxidation of ethylene to acetaldehyde reaction in an aqueous solution of palladium (H) chloride-cupric chloride with a silicone rubber membrane reactor and a polypropylene membrane reactor. It was experimentally demonstrated that membrane reactors could achieve higher production rates per unit volume of catalyst than the conventional sparged reactor. The experimental data were in good agreement with the predictions by the mathematical model. The conditions under which the membrane reactor will be more advantageous than the conventional sparged reactors can be readily ascertained with the analytical solution of the simplified membrane reactor model.