地质聚合物微球的制备及对染料的吸附

以偏高岭土和改性水玻璃为原料，采用分散悬浮固化法制备偏高岭土基地质聚合物微球（GM）。使用扫描电子显微镜、比表面积及孔径分布测试仪、傅里叶变换红外光谱仪和X射线粉末衍射仪对其进行结构表征，并研究了GM对亚甲基蓝的吸附性能。结果表明：GM对亚甲基蓝的吸附基本符合准二级动力学模型和Langmuir吸附等温线模型，333 K时最大理论吸附量为100.1 mg/g。GM对亚甲基蓝的吸附是自发吸热过程。使用后的GM在5次循环利用后，GM对MB的去除率仍然可达81.56%，易于回收和再生。分析了GM对不同阴阳离子型染料的吸附效果，结果表明，GM对阳离子型染料具有选择性吸附。GM是一种低价、有效、绿色、可循环利用的吸附剂，可用于去除水中阳离子型染料污染物。     

乙二醇水热还原法制备纳米银

利用乙二醇在高温下的还原特性,在水热条件下制备了纳米银粒子,并通过透射电镜、X射线衍射、紫外吸收光谱对其结构进行了表征.研究结果表明:所制备的纳米银具有面心立方相的多晶结构,平均粒径在30nm左右,紫外吸收峰的位置在380 nm左右.分散剂和体系中含水量对纳米银的粒径有一定影响.     

蓝钨物理性能对钨粉和碳化钨粉性能的影响

仲钨酸铵(APT)对蓝钨性能影响较大,而蓝钨物理性能对钨粉和碳化钨粉的性能影响也较大,通过对APT煅烧前或煅烧后进行特殊处理优选蓝钨原料,可以制取优质碳化钨粉。     

Food-water security and virtual water trade in the Middle East and North Africa

The purpose of this study is to analyze the political economy of food-water security in the water-scarce Middle East and North Africa region. The study deploys the lens of virtual water trade to determine how the region's economies have met their rising food-water requirements over the past three decades. It is shown that the region's water and food security currently depend to a considerable extent on water from outside the region, ‘embedded’ in food imports and accessed through trade. The analysis includes blue (surface and groundwater) and green water resources.     

“北水南调工程”的警示与应对策略

在分析我国南方和北方地区之间粮食调运与虚拟水流动量变化的基础上,指出粮食虚拟水"北水南调工程"引起了一系列潜在的危机:加剧了北方地区的水资源压力,威胁国家粮食安全并拉大了南方和北方地区的经济差距。结合我国粮食生产用水技术水平与节水农业发展现状,提出应对上述潜在危机的建议:1强化政府宏观调控职能,挖掘农业节水潜力。尽快启动研究实施国家粮食生产用水补偿奖惩制度,挖掘农业节水潜力,缓解北方地区粮食生产水资源压力。2引入市场机制,大力发展现代节水农业。尽快研究出台相关政策,鼓励并支持节水企业投资建设和经营管理节水农业工程,充分调动多方资源,促进节水农业发展,保障国家粮食安全。     

The impact of watching television on evening melatonin levels

Self‐luminous electronic devices emit optical radiation at short wavelengths, close to the peak sensitivity of melatonin suppression. The present paper investigated if light from a 178‐cm (70 in.) television suppressed melatonin. Results showed that light from televisions does not impact melatonin levels in the evening.     

Highly Efficient Quasi 2D Blue Perovskite Electroluminescence Leveraging a Dual Ligand Composition

Perovskite light-emitting diodes (PeLEDs) are advancing because of their superior external quantum efficiencies (EQEs) and color purity. Still, additional work is needed for blue PeLEDs to achieve the same benchmarks as the other visible colors. This study demonstrates an extremely efficient blue PeLED with a 488 nm peak emission, a maximum luminance of 8600 cd m⁻², and a maximum EQE of 12.2% by incorporating the double-sided ethane-1,2-diammonium bromide (EDBr₂) ligand salt along with the long-chain ligand methylphenylammonium chloride (MeCl). The EDBr₂ successfully improves the interaction between 2D perovskite layers by reducing the weak van der Waals interaction and creating a Dion–Jacobson (DJ) structure. Whereas the pristine sample (without EDBr₂) is inhibited by small stacking number (n) 2D phases with nonradiative recombination regions that diminish the PeLED performance, adding EDBr₂ successfully enables better energy transfer from small n phases to larger n phases. As evidenced by photoluminescence (PL), scanning electron microscopy (SEM), and atomic force microscopy (AFM) characterization, EDBr₂ improves the morphology by reduction of pinholes and passivation of defects, subsequently improving the efficiencies and operational lifetimes of quasi-2D blue PeLEDs.     

Modulating Backbone Conjugation of Polymeric Thermally Activated Delayed Fluorescence Emitters for High-Efficiency Blue OLEDs

Blue conjugated polymers-based OLEDs with both high efficiency and low efficiency roll-off are under big challenge. Herein, a strategy of local conjugation is proposed to construct high-efficiency blue-emitting conjugated polymers, in which the conjugation degree of polymeric backbones is adjusted by inserting different spacers. In this way, the energy level of triplet state and the energy transfer direction of the polymeric main-chains can be effectively regulated. Benefiting from such fine regulation, the prepared alternative copolymers Alt-PB36 with local conjugated main-chains can better suppress the accumulation of long-lived triplet excitons comparing with the complete conjugated polymers. The higher PLQY of Alt-PB36 also verifies the effective energy transfer from the polymeric main-chains to the TADF units. Accordingly, Alt-PB36 based solution-processed OLEDs achieve an EQE_max of 11.6% and a very low efficiency roll-off of 2.8% at 100 cd m⁻² and 15.2% at 500 cd m⁻². This result represents the best efficiency among blue light-emitting conjugated polymer-based OLEDs so far under high luminance.     

Crystallization‐Induced Emission Enhancement of a Deep‐Blue Luminescence Material with Tunable Mechano‐ and Thermochromism

Organic luminescent materials with the ability to reversibly switch the luminescence when subjected to external stimuli have attracted considerable interest in recent years. However, the examples of luminescent materials that exhibit multiresponsive properties are rarely reported. In this work, a new stimuli‐responsive dye P1 is designed and synthesized with two identical chromophores of naphthalimide, one at each side of an amidoamine‐based spacer. This amide‐rich molecule offers many possibilities for forming intra‐ and intermolecular hydrogen bond interactions. Particularly, P1 has an intrinsic property of cocrystallizing with methanol. Compared with the pristine P1 sample, the as‐prepared two‐component cocrystalline material displays an exceptive deep‐blue emission, which is extremely rare among naphthalimide‐based molecules in the solid state. Furthermore, the target material exhibits an obvious mechanochromic fluorescent behavior and a large spectral shift under force stimuli. On the other hand, the cocrystalline material shows an unusual “turn off” thermochromic luminescence accompanied by solvent evaporation. Moreover, using external stimuli to reversibly manipulate fluorescent quantum yields is rarely reported to date. The results demonstrate the feasibility of a new design strategy for solid‐state luminescence switching materials: the incorporation of solvents into organic compounds by cocrystallization to obtain a crystalline state luminescence system.     

1–MCP结合EA对蓝靛果贮藏品质及活性氧代谢的影响

目的 探究不同处理对贮藏0~60 d期间蓝靛果实贮藏品质及活性氧(ROS)代谢的影响,为蓝靛果贮藏保鲜提供技术依据。方法 以蓝靛果为实验材料,采后将其装入保鲜箱中,用1−甲基环丙烯(1-MCP)、乙烯吸收剂(EA)、1-MCP+EA进行处理,在(−0.5±0.3)℃下贮藏60 d,每隔15 d取样观察果实的感官品质,并测定其营养、生理及活性氧代谢相关指标。结果 与对照组相比,3种处理方式均能保持果实较好的感官特性,延缓果实抗坏血酸、花色苷、总酚和黄酮等含量的流失,以及果实的软化;在贮藏60 d时,处理组果实的呼吸强度分别比对照组果实的呼吸强度低22.73、12.92、34.04 mg/(kg.h),乙烯生成速率分别比对照组果实的低6.38、3.98、10.11 μL/(kg.h);可抑制超氧阴离子(O2⁻.)活性、过氧化氢(H2O2)含量、丙二醛含量及相对电导率的升高,保持较高的超氧化物歧化酶(SOD)、过氧化氢酶(CAT)、过氧化物酶(POD)、抗坏血酸过氧化物酶(APX)活性。通过SPSS分析可知,综合得分顺序为CK＜EA＜1-MCP＜1-MCP+EA,表明1-MCP+EA处理的效果最好。结论 1-MCP+EA处理对蓝靛果贮藏60 d的保鲜效果最好,可更好地保留果实的外观和内在品质,利于运输和销售。