Effect of fretting amplitudes on fretting wear behavior of steel wires in coal mines

Given that fretting wear causes failure in steel wires, we carried out tangential fretting wear tests of steel wires on a self-made fretting wear test rig under contact loads of 9 and 29 N and fretting amplitudes ranging from 5 to 180 μm. We observed morphologies of fretted steel wire surfaces on an S-3000N scanning electron microscope in order to analyze fretting wear mecha-nisms. The results show that the fretting regime of steel wires transforms from partial slip regime into mixed fretting regime and gross slip regime with an increase in fretting amplitudes under a given contact load. In partial slip regime, the friction coefficient has a relatively low value. Four stages can be defined in mixed fretting and gross slip regimes. The fretting wear of steel wires in-creases obviously with increases in fretting amplitudes. Fretting scars present a typical morphology of annularity, showing slight damage in partial slip regime. However, wear clearly increases in mixed fretting regime where wear mechanism is a combination of plastic deformation, abrasive wear and oxidative wear. In gross slip regime, more severe degradation is present than in the other regimes. The main fretting wear mechanisms of steel wires are abrasive wear, surface fatigue and friction oxidation.     

动态挖掘进程内在机制研究

针对动态挖掘进程内在运行机理,通过对动态挖掘进程中不同挖掘任务的优化分析以及动态挖掘进程和生物免疫过程之间的对比分析,提出了动态挖掘进程的eDMP机制;定义健壮型协调器,融合进化计算和免疫算法,设计了eDMP机制的实现方案;在理论分析和方案设计的基础上,给出了eDMP机制的一般流程。实验结果表明,eDMP机制及其实现方案在解决动态挖掘问题上有效、适用。     

Discrimination for ablative control mechanism in solid-propellant rocket nozzle

The ablation in solid-propellant rocket nozzle is a coupling process resulted by chemistry, heat and mass transfer. Based on the heat and mass transfer theory, the aero-thermo-dynamic, and thermo-chemical kinetics, the thermal-chemical ablation model is established. Simulations are completed on the heat flow field and chemical ablation in the nozzle with different concentrations, frequency factors and activation energy of H2. The calculation results show that the concentration and the activation energy of H...     

一种基于并联机构的航天器姿态模拟装置的设计开发

航天器发射升空前进行地面测试和试验是航天器研制过程中的重要环节。文中针对一种基于并联机构的姿态模拟装置的设计开发,从位置分析、速度分析和虚拟样机的建造和仿真分析等方面对3UPS-PU并联机构进行研究,完成姿态模拟装置的设计,为航天器装配、试验和测试设备的设计提供一种新的思路。     

Intergranular oxidation of silicon in 20Cr-25Ni niobium-stabilized stainless steel at 1140–1230 K

The kinetics of intergranular oxidation of silicon in a 20Cr-25Ni Nb-stabilized stainless steel are reported, at temperatures in the range 1140–1230 K, in CO₂ at 40 bar pressure. The depth of attack increased parabolically with respect to time, with an activation energy of 335±30 kJ/mol. The mechanism of growth is discussed in terms of classical internal-oxidation theories, and an alternative explanation based on an available-space theory is developed. The internal oxidation rates in a number of different alloys are compared with diffusivities of metals in the base alloy. It is proposed that intergranular oxidation in the 20–25 Nb steel is controlled by the rate of outward diffusion of iron or chromium in the alloy.     

当前网络政治参与中存在的问题与对策

针对我国当前网络政治参与中存在着非法参与行为多、政务信息不公开致使公众政治参与缺乏信息基础、政府对公众网络政治参与的行为与观点缺乏回应等问题,本文提出了采取完善政治参与和网络政治参与的法治化机制,建立健全网络参政相关法规,保障公民网络参政议政权益,规范和打击非法政治参与行为;修改政府信息公开的法律法规,加大政府信息公开力度与规范网络监督机制;建立政府对公民网络政治参与的回应制度,以解决公民网络政治参与的相关问题,推动法治文明.     

Oxidation behavior and mechanism of aluminum oxynitride (AlON) at elevated temperatures

The oxidation behavior and mechanism of aluminum oxynitride (AlON) powder exposed to air at elevated temperatures between 800°C and 1300°C was investigated by X-ray diffractometry (XRD), scanning electron microscope (SEM), electron spin resonance (ESR), nuclear magnetic resonance (NMR), and simultaneous thermogravimetry, differential thermal analysis, and mass spectrometry techniques (TG-DTA-MS). The weight of AlON gradually increases to a maximum value at 1150°C and then decreases with further heating. Meanwhile, AlON powder undergoes chemical changes, as evidenced by lattice expansion, and turns eventually into alumina. ESR spectra reveal the occurrence of lone pair electrons in the oxidized products and the intensity of corresponding resonance signal increases before disappearing with the increase in temperature. Combined with the results of NMR and TG-DTA-MS, the measured data suggest that Al-N in [AlO₃N] tetrahedron and [AlO₅N] octahedron are gradually oxidized into Al-O-N group with lone pair electrons, which causes continuous weight gain and lattice expansion. Further oxidation at higher temperatures results in alumina and N₂.     

Experimental investigations of machining characteristics and removal mechanisms of advanced ceramics in high speed deep grinding

Machining characteristics and surface integrity of advanced ceramics, including alumina, alumina–titania, and yttria partially stabilized tetragonal zirconia, were studied under high speed deep grinding conditions. Material removal mechanisms involved in the grinding processes were explored. The material removal in the grinding of alumina and alumina–titania was dominated by grain dislodgement or lateral cracking along grain boundaries. The removal for zirconia was via both local micro fracture and ductile cutting. It was found that under a feed rate of 500 mm/min and for all the wheel speeds used, an increase in the wheel depth of cut (DOC) from 0.1–2 mm slightly improved the ground surface finish, but greatly prolonged the wheel life. This increase did not deepen the subsurface damage layer for the alumina and alumina–titania, but resulted in a slightly deeper damage layer for the zirconia.     

Anti-oxidation mechanism of SiC-B4C-C composites

Mixture of green petroleum coke, B4 C and SiC together with short carbon fiber were employed as starting materials, the mixture was press formed without any binder after grinding, dense and homogeneous binderless SiC-B4 C-C（carbon/ceramic） composites were then obtained after sintering. Composites thus prepared possess excellent anti-oxidation property, that is, mass loss less than IG within the temperature range from 900 to 1 100 ℃ for 10 h. Anti-oxidation mechanism was also discussed from the viewpoint of thermodynamics, excellent anti-oxidation property of materials thus prepared can be discribed to 1） solid SiO2 formed from SiC, which restrains the filtering of oxygen and simultaneously, its volume expansion brought about by the reaction takes roles both walling up the original pores and making the material more compact; 2） liquid B2O3 from the reaction of B4C not only makes the combination with C, B4 C and SiC tighter through forming solid solution, but also effect of reaction SiC（s）＋2CO（g） =SiO2 （s）＋3C（s） is an expansive process, which improves the microstructure of the material.     

On a novel press system with six links for precision deep drawing

The objective of this paper is to propose a novel press system with six links for precision deep drawing, and verify its feasibility. First, the system is presented and its advantages are discussed. Then, the kinematic analysis of the system is obtained by examining the geometry of the design. Moreover, kinematic dimensions of the variable coupling are found by using optimization method. Furthermore, the proposed approach is illustrated by a design example, its solid model for the proposed design is established, and then kinematic simulation is performed by ADAMS software. Finally, a prototype and an experimental setup are established, and the experiment is conducted. The results show that the proposed new mechanism is feasible and of reasonable accuracy. In addition, it has the advantages of easy manufacture, lower cost, higher precision, and easy adjustability.