TERNARY EXTRACTION MODELING USING THE REDLICH-KISTER EXPANSION

Mathematical models for liquid-liquid extraction processes are not widely available. The correlation of liquid-liquid equilibrium for such a model is often difficult. One correlation, based upon the Redlich-Kister expansion for the molar excess Gibb's free energy, has been shown to accurately represent ternary liquid-liquid equilibrium systems used in liquid-liquid extraction operations.

The use of this correlation in an extraction model was investigated and found to be suitable for a ternary liquid-liquid extraction model with only minor limitations. A successful ternary liquid-liquid extraction model was developed using this equilibrium correlation.     

新疆茶藨中紫红色素的萃取工艺及稳定性研究

本文介绍了新疆野生植物茶子果实中,紫红色素提取及定性检验和色素的提取工艺。     

Semi-batch extraction of anthocyanins from red grape pomace in packed beds: experimental results and process modelling

A semi-batch extraction process of anthocyanins was studied in a packed bed. Methanol was used as solvent and the raw material studied consisted of skins of the tempranillo grape, which was obtained from the pomace from red wine vinification. The results show large diffusional effects due to strong control from the mass transfer. The best results were obtained using a high temperature and a high flow rate. A penetration model is proposed in terms of a bed of spherical particles. The model provides a value for the diffusion coefficient of the solute within the solid matrix. It can be seen that the adjustment of the model is satisfactory and that it is able to predict, to a reasonable extent, the yield of the extraction process.     

Process optimisation in sunflower oil extraction by supercritical CO2

A continuous process for the extraction of sunflower oil using supercritical CO₂, featuring multiple extractors, one oil separator and three cascaded CO₂ recovery vessels operating at different pressures, was devised and studied. For every single equipment of the plant making up the process a mathematical model was built. Experimental tests—consisting in measurements of oil solubility in supercritical CO₂—were carried out in a laboratory-scale apparatus to characterise the behaviour of sunflower oil in the separation from the supercritical fluid. The mathematical model of the whole process was coded in the commercial gPROMS process modelling environment where both its simulation and optimisation—this latter assuming the overall oil production cost as the objective function—were carried out. The process- and economics-related results are discussed and compared with those obtained with traditional and cold-pressing extraction.     

Impurity Distribution Behavior in Caprolactam Extraction with Environmentally Benign Mixed Solvents

In a previous study a solvent mixture of heptane containing 40 mass % heptanol was selected as an alternative in the industrial extraction of caprolactam to replace benzene, toluene, or chlorinated hydrocarbons. This work reports the equilibrium distribution ratio of caprolactam and four model impurities of organic nature, namely, cyclohexanone, aniline, n‐methylcaprolactam, and cyclohexane‐carboxamide, comparing the mixed solvents with toluene as a reference. The resulting phase equilibria were interpreted using the equilibrium stage model. Based on these calculations it was found that, compared to toluene, the co‐extracted fraction of cyclohexanone and aniline was higher, that of n‐methylcaprolactam was comparable, and that of cyclohexane‐carboxamide was lower using the mixed solvent. Overall, the mixed solvent reduced the fraction of co‐extracted impurities by almost 10 %.     

Evaluation of a two-temperature control structure for a two-reactant/two-product type of reactive distillation column

Several different control structures have been proposed for reactive distillation columns. The appropriate control structure depends on the flowsheet and on the type of reactions occurring in the column. If two reactants are involved and if it is desirable to operate the process without any excess of reactant, it is necessary to manage the fresh feed streams so that the stoichiometry is exactly balanced. A composition analyzer that measures an internal composition in the column is often required. However, if two products are produced, it is possible to avoid the use of an analyzer by using two temperatures in the column to adjust the two feed streams. This type of structure was proposed by Roat et al. [Roat, S., Downs. J., Vogel, E., Doss, J., 1986. Integration of rigorous dynamic modeling and control system synthesis for distillation columns. In: Chemical Process Control—CPC III. Elsevier, Amsterdam.] for the ideal reaction A+B↔C+D in one of the earliest papers dealing with reactive distillation control.The purpose of this paper is to explore the effectiveness of this two-temperature control structure for various column designs (number of reactive stages) to quantify the impact of design on controllability. We also discuss the issues of the selection of the trays whose temperatures are to be controlled and the tuning of the two interacting temperature controllers. Disturbances in production rate and fresh feed compositions are made to examine the rangeability of this control structure. Both an ideal reaction system and the methyl acetate system are studied. One of the main conclusions is that the locations of the temperature control trays should be made such that the two temperature controllers both have direct action (an increase in temperature increases feed), which requires negative openloop process gains for both loops.     

间苯二酚溶剂萃取液液相平衡研究

测定了“醋酸正丁酯-间苯二酚(溶质)-盐水(含0.2质量分率NaCl)”三元系在24℃、101.33kPa下的液液相平衡数据并给出了三角相图,用Hand公式对相平衡数据进行了关联,获得了可供工业连续萃取过程设计使用的关联式。本研究将醋酸正丁酯和正丁醇作为溶剂萃取间苯二酚进行了对比,并指出:醋酸正丁酯优于正丁醇。     

Integration of solvent extraction and liquid membrane separation: An efficient tool for recovery of bio-active substances from botanicals

An integrated process based on simultaneous solid-liquid extraction and liquid membrane separation is proposed for recovery and isolation of valuable species from botanicals. This integration provides complete exhausting of the solid material even in the case of very low solubility of the specified solute in the extracting solvent. Selectivity of the liquid membrane ensures a preferential transport of the desired solute from the native extract into the strip solution, while the other co-extracted species remain predominantly in the native extract.     

Critical building separation distance in reducing pounding risk under earthquake excitation

A separation distance between adjacent buildings is provided to reduce the risk of pounding of adjacent buildings under seismic excitations. It should be recognized that the evaluation of the critical separation distance is a one-sided barrier crossing problem while the problem of structural design under seismic excitations is a two-sided crossing problem. A procedure for assessing the required separation distance with or without considering possible uncertainty in structural properties was presented based on the reliability methods and random vibration theory. The procedure was used to carry out parametric analyses. It is shown that use of the complete quadratic combination (CQC) rule with the modal responses employed for designing structures may over- or underestimate the critical separation distance, depending on the damping ratios and the closeness of the natural vibration periods of adjacent buildings. This is due to not only one-sided versus two-sided crossing problem but also the approximation in the CQC rule. Further, the effect of the uncertainty in structural properties on the estimated separation is investigated. The results indicate that this uncertainty tends to increase the required critical separation distance.