液态金属钠高温沸腾实验回路应力分析与强度计算

本文主要完成了液态金属钠高温沸腾实验回路的应力分析与计算，确定了回路高温区连接管系的布置型式和支吊架系统，是该回路总体设计的重要组成部分。     

2—叠氮—1萘醌—5—磺酸生产工艺优化

研究以L-酸为原料,对合成用于制作PS版的2-叠氮1-萘醌-5-磺酸的亚硝化、还原及重氮化三步生产工艺进行最佳配比选优试验。结果表明对L-酸的总收率可达73-75％.获得了较高的收率。     

葡萄糖电解氧化还原工艺研究

采用自制的无膜电解槽，对同时电解氧化还原葡萄糖生成葡萄糖酸和山梨醇的工艺进行了研究。所得到的最佳工艺条件为：葡萄糖浓度０．４ｍｏｌ／Ｌ，ｐＨ值１１，电流密度３Ａ／ｄｍ￣２。在此条件下电解１２ｈ，葡萄糖转化率可达９６．４％，葡萄糖酸产率８８％，山梨醇产率１０％。同时，考察了和Ｚｎ￣（２＋）加入以及ｐＨ值对电流效率的影响。     

The effect of fibre alignment on composite strength: II. The strength of angle-ply laminates

Experiments have been carried out on relatively wide angle-ply laminate samples with very short gauge lengths. These proved to be very much stronger than samples tested in earlier work, and which form the basis for our present design with these materials. It is highly likely that the early results for strength were more indicative of edge effects than true laminate strength. This is confirmed by data from tests on pressurized tubes. A review of the literature on this shows that such tests produced results which can be an order of magnitude higher than the early laminate tests. Thus our design calculations could well be severely underestimating the potential strength of angle-ply laminates. This may be having serious consequences for the aerospace industry, through the use of design criteria for strength which may be too conservative. Single-fibre experiments may pave the way for more realistic estimates of angle-ply laminate strengths. These indicate that a simple one-third power rule can be used to estimate the potential strength. However, this is purely ad hoc at present, and needs to be put on a firmer footing through both theoretical and experimental studies. Furthermore, if this approach is adopted, edge effects will still have to be allowed for, and estimated on the basis of the aspect ratio of the part.     

十万立方米储罐用高强钢SPV490Q的冬季焊接施工

通过对高强钢焊接性能的分析 ,提出了高强钢冬季焊接施工带来的问题及处理办法。可靠的焊前预热和焊后保温是确保冬季焊接施工质量的关键措施     

添加煤沥青提高焦炭强度的研究

本文进行了煤和煤沥青共炭化试验,将煤沥青添加到20kg焦炉内进行炼焦试验。结果表明,煤沥青对武钢用煤有一定的改质作用,添加煤沥青可提高焦炭强度。     

大庆油田深层岩石力学特性参数的试验研究

通过对岩石可钻性、硬度、抗压强度等参数的测量 ,对大庆油田深井不同深度、不同层位、不同岩性的具有广泛代表性的岩心进行试验。并通过线性回归分析 ,建立了适用性较广的钻井岩石力学特性参数预测模型 ,为深井钻头选型提供了依据。     

S—135钢板热轧工艺研究

S—135钢板是水电站用高强耐磨不锈钢板,既要求强度高、韧性好,又要求耐磨、耐蚀性强,生产难度较大。除我厂外,目前国内尚无其它厂家能够生产这种钢板。该钢板在加热轧制,冷却过程中要解决很多技术难点。我们通过采用特殊的控制轧制和控制冷却工艺,很好地解决了诸多技术难点,使S—135钢板的开发研制取得了成功。为电站用高强度耐磨不锈钢生产提供了宝贵的经验,也为控制轧制及控制冷却技术在中板生产行业的应用起到了积极的推动作用。     

Evaluation of rainfall networks using entropy: II. Application

This paper, the second in the series, applies the entropy approach to space and time evaluation of rainfall networks in Louisiana. The evaluation is made for five sampling intervals: daily, 2-day, weekly, monthly, and yearly, and for two separate seasons. In each case, the best combination of raingages is suggested and the lines of equal information (isoinformation contours) are constructed showing the areas of greater or less information transfer. The isoinformation lines are especially suitable in decisions concerning the expansion of the existing network or deleting the unnecessary raingages.     

Parallel associative combinator evaluation II

A new evaluation model for SK combinator expressions is presented and used as a basis for the design of a novel processor. The resulting machine architecture resembles a dataflow ring, but executions are constrained to be fully lazy. An automatic dynamic load sharing mechanism for a distributed multiprocessor architecture is suggested, and initial simulation results are presented.