Laboratory study of soil acidification and leaching of nutrients from a soil amended with various surface-incorporated acidifying agents

Granular S, finely-ground S, iron sulphate and aluminium sulphate were added at two rates to the surface (0–6 cm) of a soil and acidification and leaching of nutrients were measured over 12 months in a laboratory study. Iron and aluminium sulphate both rapidly lowered soil pH in the top 0–6 cm of the soil. There was little difference in soil pH after 3 and 12 months reaction of these two amendments. In contrast, for granular S and finely-ground S there were clear decreases in soil pH between 3 and 12 months reaction with the soil. Finely-ground S was oxidized in the soil faster than granular S and therefore had a more acidifying effect. The top 0–6 cm of the soil was acidified by all the agents used but the deeper soil was less affected. The only treatments which lowered the pH of the 12–18 cm layer below pH 6 were the high rates of iron and aluminium sulphate. Soil acidification resulted in a decrease in exchangeable Ca, Mg and K, an increase in exchangeable Al and a decrease in effective CEC in the acidified soil layers.At both levels of addition, total ionic strength of percolates from the soil followed the order: aluminium sulphate = iron sulphate > finely gound S > granular S > control and was higher at the higher rate of addition. The pH values of percolates followed the order: control > granular S > finely ground S > iron sulphate = aluminium sulphate and were lower at the higher rate of addition. For the amended soils there was a very close relationship between the pattern and total amounts of SO ₄ ^2- and Ca²⁺ leached.It was concluded that granular S is not an effective acidifying agent since it is oxidized very slowly in the soil and that acidfying agents should be incorporated to the depth that acidification is required.     

Oxidative dehydrogenation of ethane over Co–BaCO3 catalysts using CO2 as oxidant: effects of Co promoter

Co–BaCO₃ catalysts exhibited high catalytic performance for oxidative dehydrogenation of ethane (ODE) using CO₂ as oxidant. The maximal formation rate of C₂H₄ was 0.264 mmol · min⁻¹ · (g · cat.)⁻¹ (48.0% C₂H₆ conversion, 92.2% C₂H₄ selectivity, 44.3% C₂H₄ yield) on 7 wt% Co–BaCO₃ catalyst at 650 °C and 6000 ml. (g · cat.)⁻¹. h⁻¹. Co–BaCO₃ catalysts were comparatively characterized by XRF, N₂ isotherm adsorption-desorption, XRD, H₂-TPR and LRs. It was found that Co⁴⁺–O species were active sites on these catalysts in ODE with CO₂. The redox cycle of Co–O species played an important role on the catalytic performance of Co–BaCO₃ catalysts. On the other hand, the co-operation of BaCO₃ and BaCoO₃ was considered to be one of possible reasons for the high catalytic activity of these catalysts.     

纳米稀土复合固体超强酸催化合成乙酸苄酯

采用共沉淀法制备了纳米稀土复合固体超强酸SO4^2-／ZrO2-2％Nd2O3催化剂，电镜分析表明，催化剂颗粒直径在25nm左右，比表面积测定：71．03m^2／g。酸强度-12．70〈Ho〈-11．99。并对合成乙酸苄酯的最佳反应条件进行了研究。研究表明：当苯甲醇与乙酸的物质的量比为1：2，反应时间为5h，反应温度为120℃，催化剂用量为6％苯甲醇的质量时，酯化率可达92．04％。研究发现，该催化剂可重复使用并可活化再生。     

PP/纳米级CaCO_3复合材料的研究

研究了纳米级CaCO3填充粒状、粉状PP复合材料的力学性能,并用SEM观察纳米级碳酸钙在PP中的分散状态及用SALS分析了其结晶行为。结果表明,粉状PP更有利于纳米级碳酸钙在PP中的分散,并具有更好的加工性能、力学性能。同时纳米级碳酸钙改性PP的SALS图像变得弥散、模糊,PP球晶变得不完善,晶粒更小。     

Monitoring slope deformation using a 3-D laser image scanning system:a case study

An ILRIS-36D 3-D laser image scanning system was used to monitor the Anjialing strip mine slope on Pingshuo in Shanxi province.The basic working principles,performance indexes,features and data collection and processing methods are illustrated.The point cloud results are analyzed in detail.The rescale range analysis method was used to analyze the deformation characteristics of the slope.The results show that the trend of slope displacement is stable and that the degree of landslide danger is low.This work indicates that 3-D laser image scanning can supply multi-parameter,high precision real time data over long distances.These data can be used to study the distortion of the slope quickly and accurately.     

CuO-NiO/Al_20_2催化剂上N-甲基哌嗪合成研究

以共沉淀法制备铜、铝系复合氧化物作为催化剂,二乙醇胺和甲胺为原料,合成了N-甲基哌嗪.利用高压反应釜对其进行活性评价,发现CuO-NiO/Al2O3活性最高.并对铜、铝、镍摩尔比、沉淀剂种类、沉淀方式,焙烧温度等条件进行了优化.结果表明:催化剂中理想的Cu、Al、Ni摩尔比为1:1:3.2,沉淀剂为氢氧化钠,沉淀方式为并流,焙烧温度为500℃.该条件下N-甲基哌嗪的选择性为27.7%,二乙醇胺的转化率达89.8%.另外通过对使用前后催化剂进行表征分析发现催化剂失活原因为表面高聚物的附着和对孔道的堵塞.     

Study of the physico–chemical characteristics and rheological behaviour of boehmite dispersions for dip-coating applications

Dispersions of a totally dispersible AlOOH powder have been studied. The effect of the initial composition has been studied to outline the reactions that determine the final rheological behaviour of the dispersions. The final viscosity and viscoelastic properties of the dispersions are determined by the sol–gel phenomena occurring during the ageing treatment. Gel formation is favoured by low water and high acid contents, while it is disfavoured by prolonged stirring. Gelling time from 48 h to 4 months has been observed depending on the initial composition.     

铝合金中锌、铁的快速测定--原子吸收分光光度法

样品以盐酸溶解，加入过氧化氢助溶，蒸至近干．加入1 1盐酸提取，移入100mL容量瓶中，分取部分溶液于50mL容量瓶中，调整盐酸酸度为5％，用水稀至刻度，摇匀后，以空气-乙炔火焰水相直接测定锌和铁。为了消除大量基体元素的影响，在标准系列中加入相当量的铝。此方法快捷、简便，亦可用于锰、镁、铜、铅、镍的测定。     

三氯异氰尿酸生产技术研究

对三氯异氰尿酸合成反应过程中的主要工艺参数进行分析和实验研究,并成功地开发出了连续法生产三氯异氰尿酸的新工艺,该工艺和传统工艺相比,具有生产安全、高效、节能的特点。     

Sintering behaviour of La1−xSrxFeO3−δ mixed conductors

The sintering properties of La_1−xSr_xFeO_3−δ (x = 0.1, 0.25) mixed conductors have been investigated with particular emphasis on the effect of secondary phases due to cation non-stoichiometry (±5 mol% La excess and deficiency). Secondary phases, located at grain boundaries in cation non-stoichiometric materials, increased the sintering temperature compared to single-phase materials. Extensive swelling in final stage of sintering was observed in all materials, which resulted in micro-porous materials. The swelling was most pronounced in the phase pure and two-phase materials due to La-deficiency, while refractory secondary phases in La-excess materials inhibited both sintering, grain growth and swelling. In La-deficient materials, formation of molten secondary phases resulted in rapid swelling due to viscous flow. The present findings demonstrated the importance of controlling sintering temperature and time, as well as careful control of the cation stoichiometry of La_1−xSr_xFeO_3−δ in order to achieve fully dense and homogenous La_1−xSr_xFeO_3−δ ceramics.