The new structure of fibre glass reinforced plastics bolt

The develop actuality and direction of FRP (fibre glass reinforced plastics) bolt in the world are analyzed. The new type structure of FRP bolt was designed. Trial data indicate that, all kinds of capability target of this FRP bolt all achieve and exceed the country stand-ard, substitute present metal bolt, wood bolt and bamboo bolt and other side bolt, it can gain magnitude technology and economy benefit. FRP bolt mechanization product line produce ef-ficiency is high, its throughput a day are 750 base, this can meet demand of hit-small mining company.     

我国煤炭资源产业循环经济发展策略研究

在系统分析的基础上提出煤炭资源产业循环经济发展策略:研发、推广环境友好技术和先进技术包括清洁开采技术、推广和利用水煤浆、先进火力发电技术等进行生产;改变狭义的资源观,用好“废物”资源,如矿井水、煤层气、粉煤灰等;发展煤炭资源深加工,提高产品附加值;行业耦合发展,如煤电联营,提高资源利用效率;大力发展节能技术,减少煤炭资源消耗。并为我国煤炭资源产业发展循环经济的产业政策提出了几点建议。     

煤巷锚杆支护技术的探讨

从巷道围岩强度,原岩自重应力,地质构适应力,煤柱留设宽度和巷道断面形状等方面对影响煤巷稳定性的因素进行了分析,提出了煤巷锚杆支护注意的6个问题。     

济钢高炉喷煤数学模型的研究与应用

基于湍流两相流理论建立了高炉喷煤两相流动及传质三维数学模型。采用该模型指导高炉生产 ,高炉利用系数由2 .7t/(m3.d)提高到 3 .0 t/(m3.d)以上 ,焦比由 460 kg/t降到 40 0 kg/t,煤比达到 10 0 kg/t,提高了高炉的各项经济技术指标。     

Preparation of clean coal by flotation following ultra fine liberation

This paper reports the results of current fundamental research at the Department of Process Engineering, University of Miskolc on the processing of clean coal from Mecsek bituminous coal, Southern Hungary. The theoretical possibility of the separation of different petrographic components was proven experimentally and their liberation degree was determined based on the petrographic composition, flotation kinetic study of isolated components (groups of components), scanning electron microscopy and microprobe analyses. The mill with stirred ball media was chosen for the ultra-fine liberation of the coal components. It was revealed that along with the liberation of coal components, their surface oxidation and spontaneous agglomeration, entrapping the mineral impurities take place in ultra-fine grinding. This paper discusses the interfacial phenomena occurring in the ultra-fine grinding process and their influence on the flotation. The concept for the advanced preparation of clean coal was developed, tested and proved. The main steps of this concept are the ultra-fine liberation in the stirred-media mill, the de-agglomeration of flocs spontaneously formed during the ultra-fine grinding and the induced (hydrophobic) flocculation with the following two-step flotation in a flotation column.     

Response of inertinites from some Australian coals to non-catalytic hydrogenation in tetralin

Inertinite concentrates from three Australian bituminous coals were hydrogenated at various temperatures ranging from 350 to 475 °C in the presence of tetralin without any added catalyst. Both conversion yields and microscopic observations of the benzene-extracted hydrogenation residues have revealed that the hydrogenation of the inertinite macerals becomes significant only > 400 °C, whereas the dissolution-hydrogenation of the accompanying vitrinite macerals occurs mainly between 350 and 400 °C. The major reaction pathway for the inertinite particles in the hydrogenation process appears to be one of initial mild carbonization followed by hydrogenation. A simplified reaction scheme is proposed which describes the reaction pathway involved in the hydrogenation of inertinite.     

Influence of the oxygen content of low-rank coals on the development of porosity during carbonization

The development of porosity in the course of carbonization of a flame coal, original and pre-oxidized, was studied by means of the adsorption of benzene and carbon dioxide. The results were compared with corresponding data for cokes from a xylitic brown coal. The influence of coal oxygen content on the formation of coke porosity and its thermal dependence is discussed.     

Analytical pyrolysis as a tool for the study of plastic coals

The technique of analytical pyrolysis has been used to characterize 40 similar mid-rank western Kentucky coals of widely differing ASTM Gieseler plasticity. Certain pyrolysis/g.c. variables were shown to correlate well with both ASTM Gieseler and isothermal plasticity. Highly plastic coals were shown to exhibit certain characteristic peaks in the 450 °C pyrogram which were absent in the pyrogram of the non-plastic coals. Two coals, representing the two extremes in plasticity, were selected for further study. After extraction with solvents such as DMF the characteristic peaks were absent in the 450 °C pyrogram of the extraction residue of the highly plastic coal. These peaks were also shown to decrease with increasing severity of air oxidation of the plastic coal. This technique appears to be a useful tool for the analysis of mid-rank plastic coals and supports the view that the substances contained in the bitumen fraction of these coals are involved in the development of the plastic state.     

Studies of elemental distributions within discrete coal macerals: Use of secondary ion mass spectrometry and X-ray photoelectron spectroscopy

Secondary ion mass spectrometry has been used to measure qualitatively the distributions of many trace and minor elements within some well-characterized coal macerals: vitrinite, fusinite and exinite. Complementary information was obtained by using X-ray photoelectron spectroscopy. Within the vitrinite specimens studied, a widely-dispersed largely inorganic aluminosilicate phase was identified, which contained a number of other trace elements. By contrast, within the organic-rich phase of this macerai, titanium was detected in a very even distribution; this suggests that some titanium may be bonded in an organic complex. The fusinite was shown to contain elevated concentrations of calcium, magnesium and fluorine, dispersed over a large portion of the maceral. The high fluorine content could be identified as an organo-fluoro compound using XPS. Exinite was found to contain lower concentrations of most elements, compared to other macerals. The organic composition of this maceral was significantly different from that of surrounding macerals; this could be seen from the enhanced emission of the C₂H₂-secondary ion and images of this ion thus clearly outlined the position of such macerals.     

Transmission electron microscopic analysis of kidney glomeruli obtained by fine-needle aspiration

Aspiration biopsy of tumors and transplanted organs is a popular atraumatic method for diagnosis and also for the management of patients. Apart from the cytological analyses, it is clear that large aggregates of cells are obtained and these may be examined by electron microscopy. A study was carried out with dogs to assess the yield of intact glomeruli and tubules, resulting from a standard fine-needle aspiration procedure. Employing a 20-gauge needle, yields of approximately ten intact glomeruli were obtained with a tissue processing protocol that utilized filtration through a nylon mesh and backwashing, to resuspend the trapped aggregates. Processing for electron microscopy was carried out in microcentrifuge tubes. The ultrastructural preservation was excellent and the extension of these studies to investigations of not only renal transplantation, but also for diagnosis in human renal diseases of a broad spectrum, is suggested.