射频识别技术在矿用PDA中的应用研究

针对目前煤矿的数据录入工作通过手工完成存在劳动强度大、工作效率低、数据误码率较高等问题,将射频识别技术应用到矿用PDA中,并以井下物流系统为例,介绍了嵌入式射频识别系统的结构、软件设计。嵌入式射频识别系统实现了对电子标签数据的实时高精度读写和存储功能,可大大提高煤矿现场工作效率。     

Gas particle industrial flow simulation using RANSTAD

A turbulent gas particle finite-volume flow simulation of a representative coal classifier is presented. Typical values of the loading ratio permit a one-way coupling analysis. As a case study, the computational fluid dynamics code,ranstad, and the modelling aspects are discussed in some detail. The simulation indicates that small (≈ 30 μm) coal particles pass through the classifier to the furnace but that large (≈ 300 μm) particles are captured and remilled. The computational simulation indicates that the classifier performance can be improved by internal geometric modification. The commitment of the Electricity Commission of New South Wales (Pacific Power) to the exploitation of Computational Engineering for the improvement of all aspects of electricity generation is acknowledged.     

水煤浆添加剂的研究进展

随着世界原油资源的日渐减少及燃煤污染的日趋严重，水煤浆作为一种新型的环保型煤基流体燃料日益受到人们的重视。从70年代至今，国内外学都研究过多种添加剂，目前制浆用添加剂主要分为阴离子表面活性和非离子表面活性剂两大类，但高效、价廉、适用性广的添加剂为数并不多。     

神经网络在煤矿安全决策支持系统中的研究及应用

主要研究人工神经网络在煤矿安全决策支持系统中的应用。将BP网络用于瓦斯突出,解决了瓦斯突出判别困难、难以建立数学模型的难题,为煤矿瓦斯突出研究找到了一种新的建模和预测方法。     

某厂锗煤反射炉收尘系统问题探讨

文章介绍了某厂改造后的锗煤反射炉收尘系统，并对该收尘系统中存在的问题进行了分析和探讨。     

Surface Movement Regularity of Super-Wide Mining Face With Top-Coal Caving

No.4326 super-wide panel of Wangzhuang Coal Mine ( in which the fully-mechanized top-coal caving longwall mining method was used) was monitored for dynamic characteristic of surface movement. The dynamic surface movement in and after mining was predicted by using the Mining Subsidence Prediction System. The results indicate that after mining, the surface above the super-wide panel reaches a state of full subsidence, making the No.309 national highway above the panel be located on the flat bottom of the subsidence basin so that the influence of mining activity in both sides of 4326 panel on the national highway is the smallest.     

CeO2和La2O3对高炉喷吹煤粉燃烧过程的影响

在模拟高炉喷吹的条件下,对添加CeO2 和La2O3的混合煤粉进行了燃烧试验,考察了稀土氧化物对高炉喷吹煤粉燃烧过程的影响,并探讨了其助燃作用机理.     

电热还原高铝粉煤灰制取Fe-Al-Si合金的试验研究

使用碳管电阻炉在1950～2200℃温度范围内，用焦炭粉还原高铝粉煤灰，制取Fe-Al-Si合金。试验结果表明：只有当还原温度高于2050℃时，高铝粉煤灰中的Al2O3才能显著地还原；Al和Si的收得率皆随还原温度升高而增高；在一定高铝粉煤灰和配Fe量的条件下，还原制取的Fe-Al-Si合金中的Al、Si含量均随还原温度升高而增高；在一定还原温度条件下，还原制取的Fe-Al-Si合金中的Al含量随高铝粉煤灰中的Al2O3含量的增高而增高，Si含量随高铝粉煤灰中的Al2O3含量增高（SiO2含量降低）而降低。     

Flow Simulation and Optimization of Plasma Reactors for Coal Gasification

This paper reports a 3-d numerical simulation system to analyze the complicated flow in plasma reactors for coal gasification, which involve complex chemical reaction, two-phase flow and plasma effect. On the basis of analytic results, the distribution of the density, tempera-ture and components‘ concentration are obtained and a different plasma reactor configuration is proposed to optimize the flow parameters. The numerical simulation results show an improved conversion ratio of the coal gasification. Different kinds of chemical reaction models are used to simulate the complex flow inside the reactor. It can be concluded that the numerical simulation system can be very useful for the design and optimization of the plasma reactor.     

基于SFC的输煤系统程控设计

介绍顺序功能图SFC(顺序功能图)法的原理及应用，列举该方法的一些典型应用，给出了所设计系统的控制要求、状态转移图和梯形图，并对它们各自的优点和不足进行比较。最后采用F1系列的可编程序控制器实现输煤系统皮带运输机的编程设计，对PLC(可编程序控制器)控制系统的设计有一定的指导意义。