高放废液中^147Pm的测定

建立了高放废液中~(147)Pm的测定方法。用HDEHP萃取稀土,再用HDEHP萃淋树脂柱分离AM和稀土。然后用高效液相色谱法将~(147)Pm从Eu、Ce等其它稀土中分离出来,用液体闪烁法测量~(147)Pm的放射性活度。     

微波等离子体化学气相沉积的 a-Si∶H 性能研究

本文着重对微波等离子体化学气相沉积法高速沉积的 a-Si∶H 膜的物理性能进行评价研究.测量了沉积膜的光电性能、暗电导激活能、光禁带宽度、光吸收特性、沉积膜中悬键态密度以及氢含量等,并讨论沉积条件对膜性能的影响.结果表明,在沉积速率高达30～90(?)/s 情况下,膜的光电导(光照强度10~5Lux)与暗电导比值可达10~3～10~5,暗电导率从10~(-3)到10~(-11)((?)cm)~(-1),其激活能在0.23～0.88eV 之间(0～200℃温度范围内),光禁带宽度为1.40～2.20eV,氢含量约为2～20%.     

Flame retardant and the degradation mechanism of high impact polystyrene/Fe-montmorillonite nanocomposites

High impact polystyrene/Fe-montmorillonite (HIPS/Fe-MMT) nanocomposites were successfully prepared by melting intercalation. The nanostructures of HIPS/Fe-MMT were testified by X-ray diffraction (XRD) and transmission electron microscope (TEM). Corresponding to pure HIPS, the thermal stability of HIPS/Fe-MMT nanocomposites was notably improved. The peaks of heat release rate (PHRR) and the mass loss rate (MLR) were significantly reduced after the formation of the HIPS/Fe-MMT nanocomposites from cone calorimetry. And nanocomposites PHRR was further lower with the increase of Fe-MMT content in the range of 1 to 5 wt%. The degradation mechanism of HIPS and HIPS/Fe-MMT nanocomposites was conducted by pyrolysis gas chromatography mass spectrometry (Py-GC-MS). And the reason of the enhancement of thermal stability maybe is that structural iron is the operative site for radical trapping in the Fe-MMT and the nanostructure enhances the interaction of the chains of the HIPS.     

Boundary Procedures for Summation-by-Parts Operators

Four different methods of imposing boundary conditions for the linear advection-diffusion equation and a linear hyperbolic system are considered. The methods are analyzed using the energy method and the Laplace transform technique. Numerical calculations are done, considering in particular the case when the initial data and boundary data are inconsistent.     

低铁耗条件下转炉高碳低磷工艺实践与应用

对转炉炼钢实现低铁耗和高碳低磷工艺进行了分析，介绍了南钢公司转炉炼钢实践低铁耗条件下高碳低磷工艺的具体应用措施。     

Algorithms for multiprocessor scheduling with two job lengths and allocation restrictions

A variant of the High Multiplicity Multiprocessor Scheduling Problem with C job lengths is considered, in which jobs can be processed only by machines not greater than a given index. When C=2, polynomial algorithms are proposed, for the feasibility version of the problem and for maximizing the number of scheduled jobs.     

电解防污用开关恒流源初探

对新研制的两种电解防污开关恒流源所采用的不同逆变器、开关功率管、直流工作电源及取样方式的工作状态、工作特性进行了分析比较。在研制过程中，重点解决了恒流电源工作的安全可靠性、稳定性、抗干扰能力及输出范围宽等问题。     

液态金属钠高温沸腾实验回路应力分析与强度计算

本文主要完成了液态金属钠高温沸腾实验回路的应力分析与计算，确定了回路高温区连接管系的布置型式和支吊架系统，是该回路总体设计的重要组成部分。