影响挠性印制板插入损耗的几种因素

文章采用三层板叠构对高频通信用挠性印制板(FPCB)的插损进行测试对比,从制造FPCB的材料种类、材料厚度、胶层厚度、仿真设计、信号线过孔类型、盲孔质量,以及信号线阻抗值大小等多个因素总结出对最高频率到20GHz信号插损的影响.     

Simple method of calibration of conventional sodar antenna system

The accurate estimation of sodar antenna parameters, back-scattering cross-section and a knowledge of acoustic absorption in the atmospheric air are needed in case structure parameters are to be computed. In the paper a simple method using a theoretical antenna directivity pattern, together with measurements of transduction characteristics of the acoustic transducer has been suggested. The method has been used for two sodars belonging to the Russian Academy (Sodar Latan-I) and the National Physical Laboratory, New Delhi, The theoretically and experimentally determined directivities of the Sodar Transducer Systems have been compared and it has been found that they coincide rather satisfactorily within the angles at which the paraboloids of sodars are seen from their respective foci. Computed thermal structure parameter values using Sodar Latan-I based on the above approach have been found to be comparable with the values computed from microthermal data collected simulaneously at the same place     

An investigation of the performance portability of OpenCL

This paper reports on the development of an MPI/OpenCL implementation of LU, an application-level benchmark from the NAS Parallel Benchmark Suite. An account of the design decisions addressed during the development of this code is presented, demonstrating the importance of memory arrangement and work-item/work-group distribution strategies when applications are deployed on different device types. The resulting platform-agnostic, single source application is benchmarked on a number of different architectures, and is shown to be 1.3–1.5× slower than native FORTRAN 77 or CUDA implementations on a single node and 1.3–3.1× slower on multiple nodes. We also explore the potential performance gains of OpenCL’s device fissioning capability, demonstrating up to a 3× speed-up over our original OpenCL implementation.     

A correlation-free on-line optimal control method of heat rejection pressures in CO2 transcritical systems

This paper proposes a novel correlation-free on-line optimal control method for CO₂ transcritical refrigeration systems. It uses the on-line correction formula to track the optimal pressure set point. As a critical advantage against the existing empirical correlations of the heat rejection pressure, it is independent of the cycle, the system specifications, and the operating conditions. Dynamic numerical simulation demonstrates how to apply the new method to a basic CO₂ transcritical refrigeration system. The results show that the proposed method can well track the optimal pressures and is robust to resist the sampling noise.     

Investigation of structural and optoelectronic properties of BaThO3

Structural and optoelectronic properties of BaThO₃ cubic perovskite are calculated using all electrons full potential linearized augmented plane wave (FP-LAPW) method. Wide and direct band gap, 5.7 eV, of the compound predicts that it can be effectively used in UV based optoelectronic devices. Different characteristic peaks in the wide UV range emerges mainly due to the transition of electrons between valance band state O-p and conduction band states Ba-d, Ba-f, Th-f and Th-d.     

Quantitative measurement of cementite dissociation in drawn pearlitic steel

Fractional dissociation of cementite was quantified as a function of strain by measuring the volume change of cementite in the pearlitic steel. The amount of carbon dissolved into the ferrite was estimated from the decrease of cementite volume, to correlate with the hardness in different strain level. The hardness showed linear relationship with the carbon dissolved into the ferrite matrix, which is believed to contribute in strengthening the drawn wire. Defects introduced from the deformation were believed to lower the energy barrier of cementite break-ups and to enhance the dissolution of carbon into ferrite.     

Microstructure and analysis of oxide scales formed on Cr-Si-Ni compacts in air and H2O-containing atmosphere

The purpose of this study was to characterize the oxide scales formed on various Cr-Si-Ni compacts at 1273 K in air and H₂O-containing atmosphere by TEM. It was found that CrSi₂-(5-20)mass%Ni compacts form double layer scales, consisting of an outer Cr₂O₃ layer and an inner SiO₂ layer. The oxide scale changed from SiO₂- to Cr₂O₃-based scale with an increase in the Ni concentration. However, it was observed that the oxide scale formed in H₂O-containing atmospheres showed local SiO₂ growth into the substrate. This result suggests that the inward oxidant diffusion promotes the local growth of SiO₂ in the H₂O-containing atmospheres.     

The effect of roll-processing orientation on stress corrosion cracking of warm-rolled 304L stainless steel in oxygenated and deoxygenated high temperature pure water

Stress corrosion crack growth rates of 304L stainless steel after one-directionally warm-rolled along the longitudinal (L) direction were measured in oxygenated and deoxygenated pure water at 288 °C. The fracture mode is mainly intergranular in the Transverse-longitudinal (T-L) orientation specimen, while it is occasionally intergranular in the Longitudinal-transverse (L-T) orientation specimen. The crack growth rates in the T-L orientation are higher than those in the L-T orientation in both oxygenated and deoxygenated environments, which is related to the effective cracking growth path as the result of microstructural anisotropy and applied loading direction.     

冰箱匹配变频压缩机箱体振动高分析、研究与优化

本文针对冰箱系统匹配变频压缩机过程中存在的2000～3000rpm转速段箱体振动高问题进行了系统的分析与研究。采用模态分析法与振动响应相结合的技术手段,定位了箱体匹配的6个主要模态频率,并结合系统随转速变化的振动曲线加以分析,得出发生振动高的根本原因。同时结合声学理论知识,通过更换胶脚的方式使问题彻底解决。该研究成果为冰箱与压缩机在匹配过程中解决并优化其系统振动、提高整机的声品质提供了重要的科学依据和实践经验。