文峪河灌区节水改造工程铸铁闸门与螺杆式启闭机施工技术探讨

通过对文峪河灌区节水改造配套工程铸铁闸门与螺杆式启闭机施工这一工程实例,简单介绍铸铁闸门与螺杆式启闭机新施工方法、新安装步骤及调试与保养。     

Impact of speech presentation level on cognitive task performance: implications for auditory display design

Speech displays and verbal response technologies are increasingly being used in complex, high workload environments that require the simultaneous performance of visual and manual tasks. Examples of such environments include the flight decks of modern aircraft, advanced transport telematics systems providing in-vehicle route guidance and navigational information and mobile communication equipment in emergency and public safety vehicles. Previous research has established an optimum range for speech intelligibility. However, the potential for variations in presentation levels within this range to affect attentional resources and cognitive processing of speech material has not been examined previously. Results of the current experimental investigation demonstrate that as presentation level increases within this ‘optimum’ range, participants in high workload situations make fewer sentence-processing errors and generally respond faster. Processing errors were more sensitive to changes in presentation level than were measures of reaction time. Implications of these findings are discussed in terms of their application for the design of speech communications displays in complex multi-task environments.     

合理调整磷硫矿价确保农肥协调发展

本文阐述了调整磷硫矿价，以确保农肥协调发展的必要性，同时指出了在调价过程中有待解决的几个问题。     

High temperature piezoelectric materials: Defect chemistry and electro-mechanical properties

Langasite (La₃Ga₅SiO₁₄, LGS) and gallium orthophosphate (GaPO₄) resonators exhibit piezoelectrically exited bulk acoustic waves at temperatures of up to at least 1400^∘C and 900^∘C, respectively. Their mass sensitivity at elevated temperatures has been found to be about as high as that of quartz at room temperature. Within its operation temperature range, GaPO₄ shows significantly lower losses than LGS. Factors restricting application relevant properties of LGS at elevated temperatures, such as the mass resolution, include excessive viscous damping. Therefore, the effective viscosity is determined as a function of the temperature by fitting the calculated complex impedance to the experimental data in the vicinity of the resonance frequency. The viscosity shows an Arrhenius-like behavior if a temperature independent contribution is subtracted. The activation energies of the viscosity for LGS and GaPO₄ correspond to those of the bulk electrical conductivity for each material. Viscosity and conductivity are obviously correlated. Therefore, it is highly likely that the predominant conductivity mechanism also controls the mechanical damping. First attempts to minimize the viscosity of LGS by doping are undertaken. Very light doping does, however, not change the conductivity and viscosity of LGS. Higher doping levels have to be applied and tested. Based on the electromechanical properties given for undoped LGS, the applicability of this material as resonant gas sensor at 600^∘C is demonstrated.     

Characteristics of Metal Droplets in Slag Tapped from the Blast Furnace

Slag samples, hot‐metal samples and hot‐metal temperatures were obtained during tapping of two blast furnaces. Sampling was carried out at different time points during tapping of three separate heats. The size distribution and composition of metal droplets found in the slag were determined using scanning electron microscopy. Only metal droplets above 0.75 μm could be counted and analysed. All droplets were below 8 μm in diameter and the great majority of these droplets were found to be between 0.75 and 2 μm. The size distribution did not differ significantly for different slag samples. Iron was the main droplet component. Electron probe microanalysis showed that the droplets contained small amounts of carbon. The percentage of the area in a studied cross‐section that was covered with metal droplets varied between 0.01 and 0.07%. Calculations based on Stoke's law showed that the distance droplets travel in the slag is in the micron range. Slag samples taken in the beginning of slag tapping contained more droplets than those taken in the middle of slag tapping, an indication that most droplets can be found in the area near the furnace wall. Some droplets were determined to have magnesium enrichment at the external surface.     

时间分解光谱技术在钢铁分析中的应用

研究了单火花光谱在不同采样时间段分析灵敏度与窗口的关系,P、S、Al、Ni、Ti、B、Mg、Sb、Pb、As、Bi、Ta、Sn应用TRS技术检出限明显降低,而C、Si、Mn、Cr、Mo、V、W、Co、Nb则不显著;合适的采样窗口能提高Sb的分析准确度,Mg则可减少背景波动带来的影响,Cu可扩大分析线性范围;采用TRS技术在诸有效元素中分析灵敏度可提高1.36～5.00倍,能更好地满足品种钢的研究开发与生产检验的需求.     

电炉还原熔炼氧化钴矿的生产实践

介绍了刚果(金)钴铜冶炼厂电炉还原熔炼处理钴铜氧化矿工艺的设计特点及生产实践。     

矿业软件在矿产储量评价中的应用

矿产储量评价的基本内容是建立矿床地质模型进行品位估计和储量分类分级．地质控制条件限制是矿床建模的重要手段。地质统计学方法是矿块品位估计以及储量分级等的有效方法．国内的应用实例表明。国际先进矿业软件是矿产储量评价的先进工具，应用矿业软件进行矿产储量评价是市场经济的需要。     

完善武钢-烧烧结矿质量的改造与实践

阐述了武钢一烧经过2001年改造后,着重从8个方面对质量进行完善的实践,并针对质量完善的现状提出了进一步提高质量所存在的问题.